From: Kevin Hilman <khilman@deeprootsystems.com>
To: linux-omap@vger.kernel.org
Subject: [PATCH 5/5] OMAP2/3: hwmod: L3 and L4 CORE/PER/WKUP hwmods don't have IDLEST
Date: Thu, 27 May 2010 14:13:36 -0700 [thread overview]
Message-ID: <1274994816-30335-6-git-send-email-khilman@deeprootsystems.com> (raw)
In-Reply-To: <1274994816-30335-1-git-send-email-khilman@deeprootsystems.com>
Since these hwmods do not have IDLEST, set the HWMOD_NO_IDLEST flag,
otherwise _enable() will fail due to failing _wait_target_ready().
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 9 ++++++---
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 9 ++++++---
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 12 ++++++++----
3 files changed, 20 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index e5530c5..a8b57a6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -65,7 +65,8 @@ static struct omap_hwmod omap2420_l3_hwmod = {
.masters_cnt = ARRAY_SIZE(omap2420_l3_masters),
.slaves = omap2420_l3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+ .flags = HWMOD_NO_IDLEST,
};
static struct omap_hwmod omap2420_l4_wkup_hwmod;
@@ -95,7 +96,8 @@ static struct omap_hwmod omap2420_l4_core_hwmod = {
.masters_cnt = ARRAY_SIZE(omap2420_l4_core_masters),
.slaves = omap2420_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+ .flags = HWMOD_NO_IDLEST,
};
/* Slave interfaces on the L4_WKUP interconnect */
@@ -115,7 +117,8 @@ static struct omap_hwmod omap2420_l4_wkup_hwmod = {
.masters_cnt = ARRAY_SIZE(omap2420_l4_wkup_masters),
.slaves = omap2420_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+ .flags = HWMOD_NO_IDLEST,
};
/* Master interfaces on the MPU device */
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 0852d95..8b1f74b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -65,7 +65,8 @@ static struct omap_hwmod omap2430_l3_hwmod = {
.masters_cnt = ARRAY_SIZE(omap2430_l3_masters),
.slaves = omap2430_l3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+ .flags = HWMOD_NO_IDLEST,
};
static struct omap_hwmod omap2430_l4_wkup_hwmod;
@@ -97,7 +98,8 @@ static struct omap_hwmod omap2430_l4_core_hwmod = {
.masters_cnt = ARRAY_SIZE(omap2430_l4_core_masters),
.slaves = omap2430_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+ .flags = HWMOD_NO_IDLEST,
};
/* Slave interfaces on the L4_WKUP interconnect */
@@ -117,7 +119,8 @@ static struct omap_hwmod omap2430_l4_wkup_hwmod = {
.masters_cnt = ARRAY_SIZE(omap2430_l4_wkup_masters),
.slaves = omap2430_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+ .flags = HWMOD_NO_IDLEST,
};
/* Master interfaces on the MPU device */
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 39b0c0e..e288b20 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -76,7 +76,8 @@ static struct omap_hwmod omap3xxx_l3_hwmod = {
.masters_cnt = ARRAY_SIZE(omap3xxx_l3_masters),
.slaves = omap3xxx_l3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .flags = HWMOD_NO_IDLEST,
};
static struct omap_hwmod omap3xxx_l4_wkup_hwmod;
@@ -106,7 +107,8 @@ static struct omap_hwmod omap3xxx_l4_core_hwmod = {
.masters_cnt = ARRAY_SIZE(omap3xxx_l4_core_masters),
.slaves = omap3xxx_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .flags = HWMOD_NO_IDLEST,
};
/* Slave interfaces on the L4_PER interconnect */
@@ -126,7 +128,8 @@ static struct omap_hwmod omap3xxx_l4_per_hwmod = {
.masters_cnt = ARRAY_SIZE(omap3xxx_l4_per_masters),
.slaves = omap3xxx_l4_per_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_per_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .flags = HWMOD_NO_IDLEST,
};
/* Slave interfaces on the L4_WKUP interconnect */
@@ -146,7 +149,8 @@ static struct omap_hwmod omap3xxx_l4_wkup_hwmod = {
.masters_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_masters),
.slaves = omap3xxx_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .flags = HWMOD_NO_IDLEST,
};
/* Master interfaces on the MPU device */
--
1.7.0.2
prev parent reply other threads:[~2010-05-27 21:13 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-27 21:13 [PATCH 0/5] OMAP2/3: misc. hwmod fixes Kevin Hilman
2010-05-27 21:13 ` [PATCH 1/5] OMAP: hwmod: allow idle after HWMOD_INIT_NO_IDLE Kevin Hilman
2010-05-27 21:13 ` [PATCH 2/5] OMAP: hwmod: if IDLEST fields are not set, use module defaults Kevin Hilman
2010-06-18 16:43 ` Kevin Hilman
2010-05-27 21:13 ` [PATCH 3/5] OMAP: hwmod: add option for no locking in idle/enable paths Kevin Hilman
2010-05-27 21:13 ` [PATCH 4/5] OMAP24xx: CM: fix mask used for checking IDLEST status Kevin Hilman
2010-05-27 21:13 ` Kevin Hilman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1274994816-30335-6-git-send-email-khilman@deeprootsystems.com \
--to=khilman@deeprootsystems.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).