From: Cory Maccarrone <darkstar6262@gmail.com>
To: linux-omap@vger.kernel.org
Cc: linwizard-devel@lists.sf.net, Cory Maccarrone <darkstar6262@gmail.com>
Subject: [PATCH 1/4] [OMAP1] Add MMC board code common to HTC devices
Date: Fri, 28 May 2010 22:28:04 -0700 [thread overview]
Message-ID: <1275110887-2918-2-git-send-email-darkstar6262@gmail.com> (raw)
In-Reply-To: <1275110887-2918-1-git-send-email-darkstar6262@gmail.com>
This change adds the htc-mmc.c and htc-mmc.h files that
contain common setup code for many OMAP850-based HTC
smartphones. This code is a port of the code used by
the linwizard project to support devices such as the
HTC Wizard, HTC Herald, HTC Opal, etc.
Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
---
arch/arm/mach-omap1/htc-mmc.c | 104 +++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-omap1/htc-mmc.h | 26 ++++++++++
2 files changed, 130 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-omap1/htc-mmc.c
create mode 100644 arch/arm/mach-omap1/htc-mmc.h
diff --git a/arch/arm/mach-omap1/htc-mmc.c b/arch/arm/mach-omap1/htc-mmc.c
new file mode 100644
index 0000000..4fa8bb4
--- /dev/null
+++ b/arch/arm/mach-omap1/htc-mmc.c
@@ -0,0 +1,104 @@
+/*
+ * linux/arch/arm/mach-omap1/htc-mmc.c
+ *
+ * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
+ * Author: Felipe Balbi <felipe.lima@indt.org.br>
+ *
+ * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is:
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/mmc.h>
+#include <asm/mach-types.h>
+
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+#define OMAP_MMC_REG_SYSC (0xfffb7800 + 0x32)
+#define OMAP_MMC_REG_SYSS (0xfffb7800 + 0x34)
+
+static int slot_cover_open;
+static struct device *mmc_device;
+
+static int htc_mmc_set_power(struct device *dev, int slot, int power_on,
+ int vdd)
+{
+#ifdef CONFIG_MMC_DEBUG
+ dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
+ power_on ? "on" : "off", vdd);
+#endif
+ if (slot != 0) {
+ dev_err(dev, "No such slot %d\n", slot + 1);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int htc_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
+{
+#ifdef CONFIG_MMC_DEBUG
+ dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1,
+ bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
+#endif
+ if (slot != 0) {
+ dev_err(dev, "No such slot %d\n", slot + 1);
+ return -ENODEV;
+ }
+
+ /* Treated on upper level */
+
+ return bus_mode;
+}
+
+static int htc_mmc_get_cover_state(struct device *dev, int slot)
+{
+ BUG_ON(slot != 0);
+ return slot_cover_open;
+}
+
+static int htc_mmc_late_init(struct device *dev)
+{
+ mmc_device = dev;
+ return 0;
+}
+
+static void htc_mmc_cleanup(struct device *dev)
+{
+}
+
+static struct omap_mmc_platform_data htc_mmc1_data = {
+ .nr_slots = 1,
+ .switch_slot = NULL,
+ .init = htc_mmc_late_init,
+ .cleanup = htc_mmc_cleanup,
+ .slots[0] = {
+ .set_power = htc_mmc_set_power,
+ .set_bus_mode = htc_mmc_set_bus_mode,
+ .get_ro = NULL,
+ .get_cover_state = htc_mmc_get_cover_state,
+ .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
+ MMC_VDD_32_33 | MMC_VDD_33_34,
+ .name = "mmcblk",
+ .nomux = 1,
+ .wires = 4,
+ .switch_pin = -1,
+ },
+};
+
+static struct omap_mmc_platform_data *htc_mmc_data[1];
+
+void __init htc_mmc_init(void)
+{
+ /* register it */
+ htc_mmc_data[0] = &htc_mmc1_data;
+ omap1_init_mmc(htc_mmc_data, 1);
+}
+#endif
+
diff --git a/arch/arm/mach-omap1/htc-mmc.h b/arch/arm/mach-omap1/htc-mmc.h
new file mode 100644
index 0000000..480de14
--- /dev/null
+++ b/arch/arm/mach-omap1/htc-mmc.h
@@ -0,0 +1,26 @@
+/*
+ * linux/arch/arm/mach-omap1/htc-mmc.h
+ *
+ * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
+ * Author: Felipe Balbi <felipe.lima@indt.org.br>
+ *
+ * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is:
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __HTC_MMC_H
+#define __HTC_MMC_H
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+extern void htc_mmc_init(void);
+#else
+static inline void htc_mmc_init(void)
+{
+}
+#endif
+
+#endif /* __HTC_MMC_H */
+
--
1.7.0.4
next prev parent reply other threads:[~2010-05-29 5:28 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-29 5:28 [PATCH 0/4] MMC, I2C, HTCPLD for HTC Herald Cory Maccarrone
2010-05-29 5:28 ` Cory Maccarrone [this message]
2010-06-01 10:19 ` [PATCH 1/4] [OMAP1] Add MMC board code common to HTC devices Ladislav Michl
2010-06-01 15:33 ` Cory Maccarrone
2010-05-29 5:28 ` [PATCH 2/4] [OMAP] gpio: Allow for extended GPIO space Cory Maccarrone
2010-05-29 5:28 ` [PATCH 3/4] [OMAP] Add allowance for extra IRQ space Cory Maccarrone
2010-05-29 5:28 ` [PATCH 4/4] [OMAP] HTCHERALD: MMC, I2C, HTCPLD and related devices Cory Maccarrone
2010-06-01 15:37 ` Cory Maccarrone
2010-06-01 15:41 ` [PATCHv2 " Cory Maccarrone
2010-06-01 15:50 ` Cory Maccarrone
2010-06-01 15:54 ` [PATCHv3 " Cory Maccarrone
2010-07-06 8:44 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1275110887-2918-2-git-send-email-darkstar6262@gmail.com \
--to=darkstar6262@gmail.com \
--cc=linux-omap@vger.kernel.org \
--cc=linwizard-devel@lists.sf.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).