From: Thara Gopinath <thara@ti.com>
To: linux-omap@vger.kernel.org
Cc: khilman@deeprootsystems.com, paul@pwsan.com, b-cousson@ti.com,
vishwanath.bs@ti.com, sawant@ti.com,
Thara Gopinath <thara@ti.com>
Subject: [PATCH 0/8] OMAP3: Adding Smartreflex and Voltage driver support
Date: Sat, 29 May 2010 22:02:20 +0530 [thread overview]
Message-ID: <1275150748-15386-1-git-send-email-thara@ti.com> (raw)
This patch series introduces smartreflex and voltage driver support
for OMAP3430 and OMAP3630. SmartReflex modules do adaptive voltage
control for real-time voltage adjustments.
Originally all the functionalities introduced in this patch
were present in arch/arm/mach-omap2/smartreflex.c file in Kevin's
pm tree. This patch series does a major rewrite of this file
and introduces a separate voltage driver. Major contributors
to the original driver are
Eduardo Valentin (1):
OMAP3: PM: SmartReflex: Fix scheduled while atomic problem
Kalle Jokiniemi (1):
OMAP3: PM: SmartReflex driver integration
Kevin Hilman (2):
temp: SR: IO_ADDRESS conversion
OMAP: SR: OPP interfaces removed from OMAP PM layer
Nishanth Menon (1):
omap3: pm: sr: replace get_opp with freq_to_opp
Paul Walmsley (2):
OMAP SR: use opp_find_opp_by_opp_id()
OMAP SR: use OPP API for OPP ID, remove direct access
Phil Carmody (2):
OMAP3: PM: Don't do unnecessary searches in omap_sr_vdd*_autocomp_store
OMAP3: PM: Early exit on invalid parameters
Rajendra Nayak (9):
OMAP3: SR: Fix init voltage on OPP change
OMAP3: SR: Update VDD1/2 voltages at boot
OMAP3: SR: Use sysclk for SR CLKLENGTH calc
OMAP3: SR: Reset voltage level on SR disable
OMAP3: SR: Replace printk's with pr_* calls
OMAP3: SR: Remove redundant defines
OMAP3: SR: Fix SR driver to check for omap-pm return values
OMAP3: PM: Put optimal SMPS stabilization delay
OMAP3: SR: Wait for VP idle before a VP disable
Roger Quadros (4):
OMAP3: PM: Fix Smartreflex when used with PM_NOOP layer
OMAP3: PM: Make Smartreflex driver independent of SRF
OMAP3: PM: Do not Enable SmartReflex if OPP tables not defined
OMAP3: PM: Smartreflex: Fix VDD2 OPP determining logic
Romit Dasgupta (1):
omap: pm: SR: use enum for OPP types
Teerth Reddy (1):
OMAP3: SR: Replace SR_PASS/FAIL,SR_TRUE/FALSE
Tero Kristo (1):
Smartreflex: Avoid unnecessary spam
This patch series is based against origin/opp branch off
Kevin's pm tree which in turn is based off lo-master.
This series will apply against lo-master also but will
break compilation due to lack of opp framework support
on lo-master.
This patch series has been tested on OMAP3430 SDP,
OMAP3630 SDP and ZOOM3 with the following menuconfig
options enabled.
System type -> TI OMAP Implementations -> Smartreflex Support
System type -> TI OMAP Implementations ->
Class 3 mode of Smartreflex Implementation
Device Drivers -> Multifunction device drivers ->
Support power resources on TWL4030 family chips
Thara Gopinath (8):
OMAP3: PM: Adding voltage driver support for OMAP3
OMAP3: PM: Adding smartreflex driver support.
OMAP3: PM: Adding smartreflex device file.
OMAP3: PM: Adding smartreflex hwmod data
OMAP3: PM: Adding smartreflex class3 driver
OMAP3: PM: Adding T2 enabling of smartreflex support
OMAP: PM: Allowing an early init of pm debugfs driver.
OMAP3: PM: Adding debug support to Voltage and Smartreflex drivers
arch/arm/mach-omap2/Makefile | 5 +-
arch/arm/mach-omap2/board-3430sdp.c | 2 +
arch/arm/mach-omap2/board-3630sdp.c | 2 +
arch/arm/mach-omap2/board-zoom3.c | 2 +
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 209 +++++-
arch/arm/mach-omap2/pm-debug.c | 18 +-
arch/arm/mach-omap2/smartreflex-class3.c | 62 ++
arch/arm/mach-omap2/smartreflex-class3.h | 23 +
arch/arm/mach-omap2/smartreflex.c | 969 ++++++++++++++++++++
arch/arm/mach-omap2/sr_device.c | 177 ++++
arch/arm/mach-omap2/voltage.c | 1199 +++++++++++++++++++++++++
arch/arm/mach-omap2/voltage.h | 126 +++
arch/arm/plat-omap/Kconfig | 41 +
arch/arm/plat-omap/include/plat/control.h | 27 +
arch/arm/plat-omap/include/plat/smartreflex.h | 273 ++++++
drivers/mfd/twl-core.c | 7 +-
drivers/mfd/twl4030-power.c | 29 +
include/linux/i2c/twl.h | 1 +
18 files changed, 3166 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/mach-omap2/smartreflex-class3.c
create mode 100644 arch/arm/mach-omap2/smartreflex-class3.h
create mode 100644 arch/arm/mach-omap2/smartreflex.c
create mode 100644 arch/arm/mach-omap2/sr_device.c
create mode 100644 arch/arm/mach-omap2/voltage.c
create mode 100644 arch/arm/mach-omap2/voltage.h
create mode 100644 arch/arm/plat-omap/include/plat/smartreflex.h
next reply other threads:[~2010-05-29 16:32 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-29 16:32 Thara Gopinath [this message]
2010-05-29 16:32 ` [PATCH 1/8] OMAP3: PM: Adding voltage driver support for OMAP3 Thara Gopinath
2010-05-29 16:32 ` [PATCH 2/8] OMAP3: PM: Adding smartreflex driver support Thara Gopinath
2010-05-29 16:32 ` [PATCH 3/8] OMAP3: PM: Adding smartreflex device file Thara Gopinath
2010-05-29 16:32 ` [PATCH 4/8] OMAP3: PM: Adding smartreflex hwmod data Thara Gopinath
2010-05-29 16:32 ` [PATCH 5/8] OMAP3: PM: Adding smartreflex class3 driver Thara Gopinath
2010-05-29 16:32 ` [PATCH 6/8] OMAP3: PM: Adding T2 enabling of smartreflex support Thara Gopinath
2010-05-29 16:32 ` [PATCH 7/8] OMAP: PM: Allowing an early init of pm debugfs driver Thara Gopinath
2010-05-29 16:32 ` [PATCH 8/8] OMAP3: PM: Adding debug support to Voltage and Smartreflex drivers Thara Gopinath
2010-06-18 21:47 ` Kevin Hilman
2010-06-25 22:55 ` [PATCH 7/8] OMAP: PM: Allowing an early init of pm debugfs driver Kevin Hilman
2010-06-18 20:46 ` [PATCH 4/8] OMAP3: PM: Adding smartreflex hwmod data Kevin Hilman
2010-06-23 20:13 ` [PATCH 2/8] OMAP3: PM: Adding smartreflex driver support Kevin Hilman
2010-06-23 18:42 ` [PATCH 1/8] OMAP3: PM: Adding voltage driver support for OMAP3 Kevin Hilman
2010-06-23 18:57 ` Kevin Hilman
2010-06-02 23:52 ` [PATCH 0/8] OMAP3: Adding Smartreflex and Voltage driver support Kevin Hilman
2010-06-03 23:27 ` Kevin Hilman
2010-06-24 23:25 ` Kevin Hilman
2010-06-25 8:04 ` Gopinath, Thara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1275150748-15386-1-git-send-email-thara@ti.com \
--to=thara@ti.com \
--cc=b-cousson@ti.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=sawant@ti.com \
--cc=vishwanath.bs@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).