From: Omar Ramirez Luna <omar.ramirez@ti.com>
To: linux-omap <linux-omap@vger.kernel.org>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>,
Shivananda Hebbar <x0hebbar@ti.com>,
Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
Fernando Guzman Lugo <x0095840@ti.com>,
Ivan Gomez Castellanos <ivan.gomez@ti.com>,
Ernesto Ramos <ernesto@ti.com>,
Armando Uribe De Leon <x0095078@ti.com>,
Ameya Palande <ameya.palande@nokia.com>,
Felipe Contreras <felipe.contreras@nokia.com>
Subject: [PATCH 00/40] dspbridge: trivial error code cleanup
Date: Thu, 3 Jun 2010 00:47:13 -0500 [thread overview]
Message-ID: <1275544073-20418-1-git-send-email-omar.ramirez@ti.com> (raw)
These set of patches gets rid of the custom error codes still present.
Although there are a lot of patches most of them are just replacements
which were broken into single patches to avoid big patch files.
One of the patches creates a help file with the matching linux
error codes just in case the error is not descriptive enough, and
it also lists a common scenario where the error might be seen.
Finally, the last patch replaces a custom typedef (dsp_status)
with an int type as now those errors can have a negative value.
Omar Ramirez Luna (40):
DSPBRIDGE: Remove success codes
DSPBRIDGE: change DSP_SENUMCOMPLETE for ENODATA
DSPBRIDGE: err code replace CHNL_E_WAITTIMEOUT with ETIMEDOUT
DSPBRIDGE: err code replace CHNL_E_NOEOS with EPERM
DSPBRIDGE: err code replace CHNL_E_BUFSIZE with EINVAL
DSPBRIDGE: err code replace CHNL_E_NOIORPS with EIO
DSPBRIDGE: err code replace CHNL_E_ISR with EIO
DSPBRIDGE: err code replace CHNL_E_MGREXISTS with EEXIST
DSPBRIDGE: err code replace CHNL_E_NOMEMMAP with EFAULT
DSPBRIDGE: err code replace CHNL_E_INVALIDMEMBASE with EINVAL
DSPBRIDGE: err code replace CHNL_E_INVALIDWORDSIZE with EINVAL
DSPBRIDGE: err code replace CHNL_E_EOS with EPIPE
DSPBRIDGE: err code replace CHNL_E_NOIOC with EREMOTEIO
DSPBRIDGE: err code replace CHNL_E_BADCHANID with ECHRNG
DSPBRIDGE: err code replace CHNL_E_OUTOFSTREAMS with ENOSR
DSPBRIDGE: err code replace CHNL_E_MAXCHANNELS with ECHRNG
DSPBRIDGE: err code replace COD_E_ZLCREATEFAILED with ESPIPE
DSPBRIDGE: err code replace COD_E_SYMBOLNOTFOUND with ESPIPE
DSPBRIDGE: err code replace COD_E_NOSYMBOLSLOADED with ESPIPE
DSPBRIDGE: err code replace DSP_EDPMSUSPEND with EPERM
DSPBRIDGE: err code replace DSP_EDYNLOAD with EILSEQ
DSPBRIDGE: err code replace DSP_EBADSEGID with EBADR
DSPBRIDGE: err code replace DSP_EOVERLAYMEMORY with ENXIO
DSPBRIDGE: err code replace DSP_ENOSECT with ENXIO
DSPBRIDGE: err code replace DSP_ETRANSLATE with ESRCH
DSPBRIDGE: err code replace DSP_ENOTFOUND with ENOENT
DSPBRIDGE: err code replace DSP_EDCDNOAUTOREGISTER with EACCES
DSPBRIDGE: err code replace DSP_EDCDLOADBASE with EACCES
DSPBRIDGE: err code replace DSP_EDCDGETSECT with EACCES
DSPBRIDGE: err code replace DSP_EDCDPARSESECT with EACCES
DSPBRIDGE: err code replace DSP_EDCDREADSECT with EACCES
DSPBRIDGE: err code replace DSP_ESYMBOL with ESPIPE
DSPBRIDGE: err code replace DSP_EWRONGSTATE with EBADR
DSPBRIDGE: err code replace DSP_EPENDING with EPIPE
DSPBRIDGE: err code replace DSP_ECHANGEDURINGENUM with EIDRM
DSPBRIDGE: remove custom errbase definitions
DSPBRIDGE: cleanup for duplicated error codes
DSPBRIDGE: removed unused error codes from comments
DSPBRIDGE: error code guide
DSPBRIDGE: remove dsp_status typedef
Documentation/tidspbridge/error-codes | 157 ++++++++++++++
arch/arm/plat-omap/include/dspbridge/_chnl_sm.h | 2 +-
arch/arm/plat-omap/include/dspbridge/cfg.h | 57 +++---
arch/arm/plat-omap/include/dspbridge/chnl.h | 31 ++--
arch/arm/plat-omap/include/dspbridge/clk.h | 8 +-
arch/arm/plat-omap/include/dspbridge/cmm.h | 44 ++--
arch/arm/plat-omap/include/dspbridge/cod.h | 61 +++---
arch/arm/plat-omap/include/dspbridge/dbdcd.h | 73 +++----
arch/arm/plat-omap/include/dspbridge/dbdcddef.h | 2 +-
arch/arm/plat-omap/include/dspbridge/dbdefs.h | 5 +-
arch/arm/plat-omap/include/dspbridge/dbldefs.h | 2 +-
arch/arm/plat-omap/include/dspbridge/dbll.h | 14 +-
arch/arm/plat-omap/include/dspbridge/dblldefs.h | 47 ++---
arch/arm/plat-omap/include/dspbridge/dev.h | 156 ++++++--------
arch/arm/plat-omap/include/dspbridge/disp.h | 25 +--
arch/arm/plat-omap/include/dspbridge/dmm.h | 18 +-
arch/arm/plat-omap/include/dspbridge/drv.h | 38 ++--
.../arm/plat-omap/include/dspbridge/dspapi-ioctl.h | 2 +-
arch/arm/plat-omap/include/dspbridge/dspapi.h | 8 +-
arch/arm/plat-omap/include/dspbridge/dspchnl.h | 24 +-
arch/arm/plat-omap/include/dspbridge/dspdefs.h | 226 ++++++++++----------
arch/arm/plat-omap/include/dspbridge/dspdeh.h | 8 +-
arch/arm/plat-omap/include/dspbridge/dspio.h | 10 +-
arch/arm/plat-omap/include/dspbridge/dspmsg.h | 10 +-
arch/arm/plat-omap/include/dspbridge/errbase.h | 177 ---------------
arch/arm/plat-omap/include/dspbridge/io.h | 19 +-
arch/arm/plat-omap/include/dspbridge/io_sm.h | 6 +-
arch/arm/plat-omap/include/dspbridge/mgr.h | 34 ++--
arch/arm/plat-omap/include/dspbridge/msg.h | 2 +-
arch/arm/plat-omap/include/dspbridge/nldr.h | 14 +-
arch/arm/plat-omap/include/dspbridge/nldrdefs.h | 31 ++--
arch/arm/plat-omap/include/dspbridge/node.h | 148 ++++++-------
arch/arm/plat-omap/include/dspbridge/nodepriv.h | 8 +-
arch/arm/plat-omap/include/dspbridge/ntfy.h | 13 +-
arch/arm/plat-omap/include/dspbridge/proc.h | 117 +++++------
arch/arm/plat-omap/include/dspbridge/pwr.h | 25 +--
.../plat-omap/include/dspbridge/resourcecleanup.h | 30 ++--
arch/arm/plat-omap/include/dspbridge/rmm.h | 10 +-
arch/arm/plat-omap/include/dspbridge/strm.h | 71 +++---
arch/arm/plat-omap/include/dspbridge/sync.h | 11 +-
drivers/dsp/bridge/core/_tiomap.h | 4 +-
drivers/dsp/bridge/core/_tiomap_pwr.h | 14 +-
drivers/dsp/bridge/core/chnl_sm.c | 83 ++++----
drivers/dsp/bridge/core/dsp-clock.c | 9 +-
drivers/dsp/bridge/core/io_sm.c | 75 ++++----
drivers/dsp/bridge/core/mmu_fault.c | 1 -
drivers/dsp/bridge/core/msg_sm.c | 31 ++--
drivers/dsp/bridge/core/tiomap3430.c | 123 ++++++------
drivers/dsp/bridge/core/tiomap3430_pwr.c | 45 ++--
drivers/dsp/bridge/core/tiomap_io.c | 21 +-
drivers/dsp/bridge/core/tiomap_io.h | 6 +-
drivers/dsp/bridge/core/ue_deh.c | 21 +-
drivers/dsp/bridge/core/wdt.c | 1 -
drivers/dsp/bridge/pmgr/chnl.c | 17 +-
drivers/dsp/bridge/pmgr/cmm.c | 47 ++--
drivers/dsp/bridge/pmgr/cod.c | 61 +++---
drivers/dsp/bridge/pmgr/dbll.c | 47 ++--
drivers/dsp/bridge/pmgr/dev.c | 113 +++++-----
drivers/dsp/bridge/pmgr/dmm.c | 43 ++--
drivers/dsp/bridge/pmgr/dspapi.c | 101 +++++-----
drivers/dsp/bridge/pmgr/io.c | 13 +-
drivers/dsp/bridge/pmgr/msg.c | 5 +-
drivers/dsp/bridge/rmgr/dbdcd.c | 97 +++++----
drivers/dsp/bridge/rmgr/disp.c | 35 ++--
drivers/dsp/bridge/rmgr/drv.c | 97 ++++-----
drivers/dsp/bridge/rmgr/drv_interface.c | 13 +-
drivers/dsp/bridge/rmgr/dspdrv.c | 3 +-
drivers/dsp/bridge/rmgr/mgr.c | 43 ++--
drivers/dsp/bridge/rmgr/nldr.c | 91 ++++----
drivers/dsp/bridge/rmgr/node.c | 157 +++++++-------
drivers/dsp/bridge/rmgr/proc.c | 131 ++++++------
drivers/dsp/bridge/rmgr/pwr.c | 16 +-
drivers/dsp/bridge/rmgr/rmm.c | 11 +-
drivers/dsp/bridge/rmgr/strm.c | 84 ++++----
drivers/dsp/bridge/services/cfg.c | 41 ++--
drivers/dsp/bridge/services/sync.c | 10 +-
76 files changed, 1666 insertions(+), 1788 deletions(-)
create mode 100644 Documentation/tidspbridge/error-codes
delete mode 100644 arch/arm/plat-omap/include/dspbridge/errbase.h
next reply other threads:[~2010-06-03 5:56 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-03 5:47 Omar Ramirez Luna [this message]
2010-06-03 5:47 ` [PATCH 02/40] DSPBRIDGE: change DSP_SENUMCOMPLETE for ENODATA Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 03/40] DSPBRIDGE: err code replace CHNL_E_WAITTIMEOUT with ETIMEDOUT Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 04/40] DSPBRIDGE: err code replace CHNL_E_NOEOS with EPERM Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 05/40] DSPBRIDGE: err code replace CHNL_E_BUFSIZE with EINVAL Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 06/40] DSPBRIDGE: err code replace CHNL_E_NOIORPS with EIO Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 07/40] DSPBRIDGE: err code replace CHNL_E_ISR " Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 08/40] DSPBRIDGE: err code replace CHNL_E_MGREXISTS with EEXIST Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 09/40] DSPBRIDGE: err code replace CHNL_E_NOMEMMAP with EFAULT Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 10/40] DSPBRIDGE: err code replace CHNL_E_INVALIDMEMBASE with EINVAL Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 11/40] DSPBRIDGE: err code replace CHNL_E_INVALIDWORDSIZE " Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 12/40] DSPBRIDGE: err code replace CHNL_E_EOS with EPIPE Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 13/40] DSPBRIDGE: err code replace CHNL_E_NOIOC with EREMOTEIO Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 14/40] DSPBRIDGE: err code replace CHNL_E_BADCHANID with ECHRNG Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 15/40] DSPBRIDGE: err code replace CHNL_E_OUTOFSTREAMS with ENOSR Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 16/40] DSPBRIDGE: err code replace CHNL_E_MAXCHANNELS with ECHRNG Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 17/40] DSPBRIDGE: err code replace COD_E_ZLCREATEFAILED with ESPIPE Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 18/40] DSPBRIDGE: err code replace COD_E_SYMBOLNOTFOUND " Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 19/40] DSPBRIDGE: err code replace COD_E_NOSYMBOLSLOADED " Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 20/40] DSPBRIDGE: err code replace DSP_EDPMSUSPEND with EPERM Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 21/40] DSPBRIDGE: err code replace DSP_EDYNLOAD with EILSEQ Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 22/40] DSPBRIDGE: err code replace DSP_EBADSEGID with EBADR Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 23/40] DSPBRIDGE: err code replace DSP_EOVERLAYMEMORY with ENXIO Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 24/40] DSPBRIDGE: err code replace DSP_ENOSECT " Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 25/40] DSPBRIDGE: err code replace DSP_ETRANSLATE with ESRCH Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 26/40] DSPBRIDGE: err code replace DSP_ENOTFOUND with ENOENT Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 27/40] DSPBRIDGE: err code replace DSP_EDCDNOAUTOREGISTER with EACCES Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 28/40] DSPBRIDGE: err code replace DSP_EDCDLOADBASE " Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 29/40] DSPBRIDGE: err code replace DSP_EDCDGETSECT " Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 30/40] DSPBRIDGE: err code replace DSP_EDCDPARSESECT " Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 31/40] DSPBRIDGE: err code replace DSP_EDCDREADSECT " Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 32/40] DSPBRIDGE: err code replace DSP_ESYMBOL with ESPIPE Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 33/40] DSPBRIDGE: err code replace DSP_EWRONGSTATE with EBADR Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 34/40] DSPBRIDGE: err code replace DSP_EPENDING with EPIPE Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 35/40] DSPBRIDGE: err code replace DSP_ECHANGEDURINGENUM with EIDRM Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 36/40] DSPBRIDGE: remove custom errbase definitions Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 37/40] DSPBRIDGE: cleanup for duplicated error codes Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 38/40] DSPBRIDGE: removed unused error codes from comments Omar Ramirez Luna
2010-06-03 5:47 ` [PATCH 39/40] DSPBRIDGE: error code guide Omar Ramirez Luna
2010-06-11 23:00 ` [PATCH 00/40] dspbridge: trivial error code cleanup Ramirez Luna, Omar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1275544073-20418-1-git-send-email-omar.ramirez@ti.com \
--to=omar.ramirez@ti.com \
--cc=Hiroshi.DOYU@nokia.com \
--cc=ameya.palande@nokia.com \
--cc=ernesto@ti.com \
--cc=felipe.contreras@nokia.com \
--cc=ivan.gomez@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=x0095078@ti.com \
--cc=x0095840@ti.com \
--cc=x0hebbar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).