From: Charulatha V <charu@ti.com>
To: linux-omap@vger.kernel.org
Cc: khilman@deeprootsystems.com, paul@pwsan.com, tony@atomide.com,
rnayak@ti.com, p-basak2@ti.com, b-cousson@ti.com,
Charulatha V <charu@ti.com>
Subject: [PATCH:v4 09/13] OMAP: GPIO: add GPIO hwmods structures for OMAP243X
Date: Tue, 22 Jun 2010 20:31:52 +0530 [thread overview]
Message-ID: <1277218916-15213-10-git-send-email-charu@ti.com> (raw)
In-Reply-To: <1277218916-15213-9-git-send-email-charu@ti.com>
Add hwmod structures for GPIO module on OMAP243X
Signed-off-by: Charulatha V <charu@ti.com>
Signed-off-by: Basak, Partha <p-basak2@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 279 ++++++++++++++++++++++++++++
1 files changed, 279 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index b2100cf..b350928 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -15,6 +15,7 @@
#include <mach/irqs.h>
#include <plat/cpu.h>
#include <plat/dma.h>
+#include <plat/gpio.h>
#include "omap_hwmod_common_data.h"
@@ -72,6 +73,11 @@ static struct omap_hwmod omap2430_l3_hwmod = {
static struct omap_hwmod omap2430_l4_wkup_hwmod;
static struct omap_hwmod omap2430_mmc1_hwmod;
static struct omap_hwmod omap2430_mmc2_hwmod;
+static struct omap_hwmod omap2430_gpio1_hwmod;
+static struct omap_hwmod omap2430_gpio2_hwmod;
+static struct omap_hwmod omap2430_gpio3_hwmod;
+static struct omap_hwmod omap2430_gpio4_hwmod;
+static struct omap_hwmod omap2430_gpio5_hwmod;
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
@@ -80,6 +86,96 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* L4 WKUP -> GPIO1 interface */
+static struct omap_hwmod_addr_space omap2430_gpio1_addr_space[] = {
+ {
+ .pa_start = OMAP243X_GPIO1_BASE,
+ .pa_end = OMAP243X_GPIO1_BASE + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio1 = {
+ .master = &omap2430_l4_wkup_hwmod,
+ .slave = &omap2430_gpio1_hwmod,
+ .clk = "gpios_ick",
+ .addr = omap2430_gpio1_addr_space,
+ .addr_cnt = ARRAY_SIZE(omap2430_gpio1_addr_space),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 WKUP -> GPIO2 interface */
+static struct omap_hwmod_addr_space omap2430_gpio2_addr_space[] = {
+ {
+ .pa_start = OMAP243X_GPIO2_BASE,
+ .pa_end = OMAP243X_GPIO2_BASE + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio2 = {
+ .master = &omap2430_l4_wkup_hwmod,
+ .slave = &omap2430_gpio2_hwmod,
+ .clk = "gpios_ick",
+ .addr = omap2430_gpio2_addr_space,
+ .addr_cnt = ARRAY_SIZE(omap2430_gpio2_addr_space),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 WKUP -> GPIO3 interface */
+static struct omap_hwmod_addr_space omap2430_gpio3_addr_space[] = {
+ {
+ .pa_start = OMAP243X_GPIO3_BASE,
+ .pa_end = OMAP243X_GPIO3_BASE + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio3 = {
+ .master = &omap2430_l4_wkup_hwmod,
+ .slave = &omap2430_gpio3_hwmod,
+ .clk = "gpios_ick",
+ .addr = omap2430_gpio3_addr_space,
+ .addr_cnt = ARRAY_SIZE(omap2430_gpio3_addr_space),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 WKUP -> GPIO4 interface */
+static struct omap_hwmod_addr_space omap2430_gpio4_addr_space[] = {
+ {
+ .pa_start = OMAP243X_GPIO4_BASE,
+ .pa_end = OMAP243X_GPIO4_BASE + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio4 = {
+ .master = &omap2430_l4_wkup_hwmod,
+ .slave = &omap2430_gpio4_hwmod,
+ .clk = "gpios_ick",
+ .addr = omap2430_gpio4_addr_space,
+ .addr_cnt = ARRAY_SIZE(omap2430_gpio4_addr_space),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> GPIO5 interface */
+static struct omap_hwmod_addr_space omap2430_gpio5_addr_space[] = {
+ {
+ .pa_start = OMAP243X_GPIO5_BASE,
+ .pa_end = OMAP243X_GPIO5_BASE + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = {
+ .master = &omap2430_l4_core_hwmod,
+ .slave = &omap2430_gpio5_hwmod,
+ .clk = "gpio5_ick",
+ .addr = omap2430_gpio5_addr_space,
+ .addr_cnt = ARRAY_SIZE(omap2430_gpio5_addr_space),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* Slave interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = {
&omap2430_l3__l4_core,
@@ -138,11 +234,194 @@ static struct omap_hwmod omap2430_mpu_hwmod = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
+/* GPIO common */
+
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+ .gpio_bank_width = 32,
+ .dbck_flag = false,
+};
+
+static struct omap_hwmod_class_sysconfig omap243x_gpio_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap243x_gpio_hwmod_class = {
+ .name = "gpio",
+ .sysc = &omap243x_gpio_sysc,
+ .rev = 0,
+};
+
+/* GPIO1 */
+
+static struct omap_hwmod_irq_info omap243x_gpio1_irqs[] = {
+ { .name = "gpio_mpu_irq", .irq = INT_24XX_GPIO_BANK1 },
+};
+
+static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = {
+ &omap2430_l4_wkup__gpio1,
+};
+
+static struct omap_hwmod omap2430_gpio1_hwmod = {
+ .name = "gpio1",
+ .mpu_irqs = omap243x_gpio1_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio1_irqs),
+ .main_clk = "gpios_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+ .module_offs = WKUP_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_EN_GPIOS_SHIFT,
+ },
+ },
+ .slaves = omap2430_gpio1_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap2430_gpio1_slaves),
+ .class = &omap243x_gpio_hwmod_class,
+ .dev_attr = &gpio_dev_attr,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* GPIO2 */
+
+static struct omap_hwmod_irq_info omap243x_gpio2_irqs[] = {
+ { .name = "gpio_mpu_irq", .irq = INT_24XX_GPIO_BANK2 },
+};
+
+static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = {
+ &omap2430_l4_wkup__gpio2,
+};
+
+static struct omap_hwmod omap2430_gpio2_hwmod = {
+ .name = "gpio2",
+ .mpu_irqs = omap243x_gpio2_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio2_irqs),
+ .main_clk = "gpios_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+ .module_offs = WKUP_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_EN_GPIOS_SHIFT,
+ },
+ },
+ .slaves = omap2430_gpio2_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap2430_gpio2_slaves),
+ .class = &omap243x_gpio_hwmod_class,
+ .dev_attr = &gpio_dev_attr,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* GPIO3 */
+
+static struct omap_hwmod_irq_info omap243x_gpio3_irqs[] = {
+ { .name = "gpio_mpu_irq", .irq = INT_24XX_GPIO_BANK3 },
+};
+
+static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = {
+ &omap2430_l4_wkup__gpio3,
+};
+
+static struct omap_hwmod omap2430_gpio3_hwmod = {
+ .name = "gpio3",
+ .mpu_irqs = omap243x_gpio3_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio3_irqs),
+ .main_clk = "gpios_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+ .module_offs = WKUP_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_EN_GPIOS_SHIFT,
+ },
+ },
+ .slaves = omap2430_gpio3_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap2430_gpio3_slaves),
+ .class = &omap243x_gpio_hwmod_class,
+ .dev_attr = &gpio_dev_attr,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* GPIO4 */
+
+static struct omap_hwmod_irq_info omap243x_gpio4_irqs[] = {
+ { .name = "gpio_mpu_irq", .irq = INT_24XX_GPIO_BANK4 },
+};
+
+static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = {
+ &omap2430_l4_wkup__gpio4,
+};
+
+static struct omap_hwmod omap2430_gpio4_hwmod = {
+ .name = "gpio4",
+ .mpu_irqs = omap243x_gpio4_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio4_irqs),
+ .main_clk = "gpios_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+ .module_offs = WKUP_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_EN_GPIOS_SHIFT,
+ },
+ },
+ .slaves = omap2430_gpio4_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap2430_gpio4_slaves),
+ .class = &omap243x_gpio_hwmod_class,
+ .dev_attr = &gpio_dev_attr,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* GPIO5 */
+
+static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = {
+ { .name = "gpio_mpu_irq", .irq = INT_24XX_GPIO_BANK5 },
+};
+
+static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = {
+ &omap2430_l4_core__gpio5,
+};
+
+static struct omap_hwmod omap2430_gpio5_hwmod = {
+ .name = "gpio5",
+ .mpu_irqs = omap243x_gpio5_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio5_irqs),
+ .main_clk = "gpio5_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP2430_ST_GPIO5_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP2430_ST_GPIO5_SHIFT,
+ },
+ },
+ .slaves = omap2430_gpio5_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap2430_gpio5_slaves),
+ .class = &omap243x_gpio_hwmod_class,
+ .dev_attr = &gpio_dev_attr,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
static __initdata struct omap_hwmod *omap2430_hwmods[] = {
&omap2430_l3_hwmod,
&omap2430_l4_core_hwmod,
&omap2430_l4_wkup_hwmod,
&omap2430_mpu_hwmod,
+ &omap2430_gpio1_hwmod,
+ &omap2430_gpio2_hwmod,
+ &omap2430_gpio3_hwmod,
+ &omap2430_gpio4_hwmod,
+ &omap2430_gpio5_hwmod,
NULL,
};
--
1.6.3.3
next prev parent reply other threads:[~2010-06-22 15:01 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-22 15:01 [PATCH:v4 00/13] OMAP: GPIO: Implement GPIO in HWMOD way Charulatha V
2010-06-22 15:01 ` [PATCH:v4 01/13] OMAP: GPIO: Modify init() in preparation for platform device implementation Charulatha V
2010-06-22 15:01 ` [PATCH:v4 02/13] OMAP: GPIO: Populate GPIO base address in omapxxxx.h Charulatha V
2010-06-22 15:01 ` [PATCH:v4 03/13] OMAP: GPIO: Include platform_data structure for GPIO Charulatha V
2010-06-22 15:01 ` [PATCH:v4 04/13] OMAP: GPIO: Introduce support for OMAP15xx chip GPIO init Charulatha V
2010-06-22 15:01 ` [PATCH:v4 05/13] OMAP: GPIO: Introduce support for OMAP16xx " Charulatha V
2010-06-22 15:01 ` [PATCH:v4 06/13] OMAP: GPIO: Introduce support for OMAP7xx " Charulatha V
2010-06-22 15:01 ` [PATCH:v4 07/13] OMAP: GPIO: add GPIO hwmods structures for OMAP3 Charulatha V
2010-06-22 15:01 ` [PATCH:v4 08/13] OMAP: GPIO: add GPIO hwmods structures for OMAP242X Charulatha V
2010-06-22 15:01 ` Charulatha V [this message]
2010-06-22 15:01 ` [PATCH:v4 10/13] OMAP: GPIO: Add gpio dev_attr and correct clks in OMAP4 hwmod struct Charulatha V
2010-06-22 15:01 ` [PATCH:v4 11/13] OMAP: GPIO: Introduce support for OMAP2PLUS chip GPIO init Charulatha V
2010-06-22 15:01 ` [PATCH:v4 12/13] OMAP: GPIO: Implement GPIO as a platform device Charulatha V
2010-06-22 15:01 ` [PATCH:v4 13/13] OMAP: GPIO: Remove omap_gpio_init() Charulatha V
2010-06-25 23:36 ` [PATCH:v4 12/13] OMAP: GPIO: Implement GPIO as a platform device Kevin Hilman
2010-06-24 7:03 ` [PATCH:v4 03/13] OMAP: GPIO: Include platform_data structure for GPIO DebBarma, Tarun Kanti
2010-07-06 13:17 ` [PATCH:v4 00/13] OMAP: GPIO: Implement GPIO in HWMOD way Tony Lindgren
2010-07-27 11:47 ` Cousson, Benoit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1277218916-15213-10-git-send-email-charu@ti.com \
--to=charu@ti.com \
--cc=b-cousson@ti.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-omap@vger.kernel.org \
--cc=p-basak2@ti.com \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).