From: Charulatha V <charu@ti.com>
To: linux-omap@vger.kernel.org
Cc: khilman@deeprootsystems.com, paul@pwsan.com, tony@atomide.com,
rnayak@ti.com, p-basak2@ti.com, b-cousson@ti.com,
Charulatha V <charu@ti.com>
Subject: [PATCH:v4 10/13] OMAP: GPIO: Add gpio dev_attr and correct clks in OMAP4 hwmod struct
Date: Tue, 22 Jun 2010 20:31:53 +0530 [thread overview]
Message-ID: <1277218916-15213-11-git-send-email-charu@ti.com> (raw)
In-Reply-To: <1277218916-15213-10-git-send-email-charu@ti.com>
This patch adds gpio_dev_attr to OMAP4 gpio hwmod structure. This patch
also corrects the gpio .main_clk and .clk fields in gpio hwmod structures.
Signed-off-by: Charulatha V <charu@ti.com>
Signed-off-by: Basak, Partha <p-basak2@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 31 +++++++++++++++++----------
1 files changed, 19 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 20f5f8c..003d7b2 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -22,6 +22,7 @@
#include <plat/omap_hwmod.h>
#include <plat/cpu.h>
+#include <plat/gpio.h>
#include "omap_hwmod_common_data.h"
@@ -1272,6 +1273,11 @@ static struct omap_hwmod omap44xx_fdif_hwmod = {
* general purpose io module
*/
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+ .gpio_bank_width = 32,
+ .dbck_flag = true,
+};
+
static struct omap_hwmod_class_sysconfig omap44xx_gpio_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
@@ -1285,6 +1291,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_gpio_sysc = {
static struct omap_hwmod_class omap44xx_gpio_hwmod_class = {
.name = "gpio",
.sysc = &omap44xx_gpio_sysc,
+ .rev = 2,
};
/* gpio1 */
@@ -1305,7 +1312,7 @@ static struct omap_hwmod_addr_space omap44xx_gpio1_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l4_wkup__gpio1 = {
.master = &omap44xx_l4_wkup_hwmod,
.slave = &omap44xx_gpio1_hwmod,
- .clk = "l4_wkup_clk_mux_ck",
+ .clk = "gpio1_ick",
.addr = omap44xx_gpio1_addrs,
.addr_cnt = ARRAY_SIZE(omap44xx_gpio1_addrs),
.user = OCP_USER_MPU | OCP_USER_SDMA,
@@ -1325,7 +1332,6 @@ static struct omap_hwmod omap44xx_gpio1_hwmod = {
.class = &omap44xx_gpio_hwmod_class,
.mpu_irqs = omap44xx_gpio1_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio1_irqs),
- .main_clk = "gpio1_ick",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_WKUP_GPIO1_CLKCTRL,
@@ -1333,6 +1339,7 @@ static struct omap_hwmod omap44xx_gpio1_hwmod = {
},
.opt_clks = gpio1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks),
+ .dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio1_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -1356,7 +1363,7 @@ static struct omap_hwmod_addr_space omap44xx_gpio2_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio2 = {
.master = &omap44xx_l4_per_hwmod,
.slave = &omap44xx_gpio2_hwmod,
- .clk = "l4_div_ck",
+ .clk = "gpio2_ick",
.addr = omap44xx_gpio2_addrs,
.addr_cnt = ARRAY_SIZE(omap44xx_gpio2_addrs),
.user = OCP_USER_MPU | OCP_USER_SDMA,
@@ -1376,7 +1383,6 @@ static struct omap_hwmod omap44xx_gpio2_hwmod = {
.class = &omap44xx_gpio_hwmod_class,
.mpu_irqs = omap44xx_gpio2_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio2_irqs),
- .main_clk = "gpio2_ick",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_L4PER_GPIO2_CLKCTRL,
@@ -1384,6 +1390,7 @@ static struct omap_hwmod omap44xx_gpio2_hwmod = {
},
.opt_clks = gpio2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks),
+ .dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio2_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -1407,7 +1414,7 @@ static struct omap_hwmod_addr_space omap44xx_gpio3_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio3 = {
.master = &omap44xx_l4_per_hwmod,
.slave = &omap44xx_gpio3_hwmod,
- .clk = "l4_div_ck",
+ .clk = "gpio3_ick",
.addr = omap44xx_gpio3_addrs,
.addr_cnt = ARRAY_SIZE(omap44xx_gpio3_addrs),
.user = OCP_USER_MPU | OCP_USER_SDMA,
@@ -1427,7 +1434,6 @@ static struct omap_hwmod omap44xx_gpio3_hwmod = {
.class = &omap44xx_gpio_hwmod_class,
.mpu_irqs = omap44xx_gpio3_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio3_irqs),
- .main_clk = "gpio3_ick",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_L4PER_GPIO3_CLKCTRL,
@@ -1435,6 +1441,7 @@ static struct omap_hwmod omap44xx_gpio3_hwmod = {
},
.opt_clks = gpio3_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks),
+ .dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio3_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -1458,7 +1465,7 @@ static struct omap_hwmod_addr_space omap44xx_gpio4_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio4 = {
.master = &omap44xx_l4_per_hwmod,
.slave = &omap44xx_gpio4_hwmod,
- .clk = "l4_div_ck",
+ .clk = "gpio4_ick",
.addr = omap44xx_gpio4_addrs,
.addr_cnt = ARRAY_SIZE(omap44xx_gpio4_addrs),
.user = OCP_USER_MPU | OCP_USER_SDMA,
@@ -1478,7 +1485,6 @@ static struct omap_hwmod omap44xx_gpio4_hwmod = {
.class = &omap44xx_gpio_hwmod_class,
.mpu_irqs = omap44xx_gpio4_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio4_irqs),
- .main_clk = "gpio4_ick",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_L4PER_GPIO4_CLKCTRL,
@@ -1486,6 +1492,7 @@ static struct omap_hwmod omap44xx_gpio4_hwmod = {
},
.opt_clks = gpio4_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks),
+ .dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio4_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -1509,7 +1516,7 @@ static struct omap_hwmod_addr_space omap44xx_gpio5_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio5 = {
.master = &omap44xx_l4_per_hwmod,
.slave = &omap44xx_gpio5_hwmod,
- .clk = "l4_div_ck",
+ .clk = "gpio5_ick",
.addr = omap44xx_gpio5_addrs,
.addr_cnt = ARRAY_SIZE(omap44xx_gpio5_addrs),
.user = OCP_USER_MPU | OCP_USER_SDMA,
@@ -1529,7 +1536,6 @@ static struct omap_hwmod omap44xx_gpio5_hwmod = {
.class = &omap44xx_gpio_hwmod_class,
.mpu_irqs = omap44xx_gpio5_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio5_irqs),
- .main_clk = "gpio5_ick",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_L4PER_GPIO5_CLKCTRL,
@@ -1537,6 +1543,7 @@ static struct omap_hwmod omap44xx_gpio5_hwmod = {
},
.opt_clks = gpio5_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks),
+ .dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio5_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio5_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -1560,7 +1567,7 @@ static struct omap_hwmod_addr_space omap44xx_gpio6_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio6 = {
.master = &omap44xx_l4_per_hwmod,
.slave = &omap44xx_gpio6_hwmod,
- .clk = "l4_div_ck",
+ .clk = "gpio6_ick",
.addr = omap44xx_gpio6_addrs,
.addr_cnt = ARRAY_SIZE(omap44xx_gpio6_addrs),
.user = OCP_USER_MPU | OCP_USER_SDMA,
@@ -1580,7 +1587,6 @@ static struct omap_hwmod omap44xx_gpio6_hwmod = {
.class = &omap44xx_gpio_hwmod_class,
.mpu_irqs = omap44xx_gpio6_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio6_irqs),
- .main_clk = "gpio6_ick",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_L4PER_GPIO6_CLKCTRL,
@@ -1588,6 +1594,7 @@ static struct omap_hwmod omap44xx_gpio6_hwmod = {
},
.opt_clks = gpio6_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks),
+ .dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio6_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio6_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
--
1.6.3.3
next prev parent reply other threads:[~2010-06-22 15:01 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-22 15:01 [PATCH:v4 00/13] OMAP: GPIO: Implement GPIO in HWMOD way Charulatha V
2010-06-22 15:01 ` [PATCH:v4 01/13] OMAP: GPIO: Modify init() in preparation for platform device implementation Charulatha V
2010-06-22 15:01 ` [PATCH:v4 02/13] OMAP: GPIO: Populate GPIO base address in omapxxxx.h Charulatha V
2010-06-22 15:01 ` [PATCH:v4 03/13] OMAP: GPIO: Include platform_data structure for GPIO Charulatha V
2010-06-22 15:01 ` [PATCH:v4 04/13] OMAP: GPIO: Introduce support for OMAP15xx chip GPIO init Charulatha V
2010-06-22 15:01 ` [PATCH:v4 05/13] OMAP: GPIO: Introduce support for OMAP16xx " Charulatha V
2010-06-22 15:01 ` [PATCH:v4 06/13] OMAP: GPIO: Introduce support for OMAP7xx " Charulatha V
2010-06-22 15:01 ` [PATCH:v4 07/13] OMAP: GPIO: add GPIO hwmods structures for OMAP3 Charulatha V
2010-06-22 15:01 ` [PATCH:v4 08/13] OMAP: GPIO: add GPIO hwmods structures for OMAP242X Charulatha V
2010-06-22 15:01 ` [PATCH:v4 09/13] OMAP: GPIO: add GPIO hwmods structures for OMAP243X Charulatha V
2010-06-22 15:01 ` Charulatha V [this message]
2010-06-22 15:01 ` [PATCH:v4 11/13] OMAP: GPIO: Introduce support for OMAP2PLUS chip GPIO init Charulatha V
2010-06-22 15:01 ` [PATCH:v4 12/13] OMAP: GPIO: Implement GPIO as a platform device Charulatha V
2010-06-22 15:01 ` [PATCH:v4 13/13] OMAP: GPIO: Remove omap_gpio_init() Charulatha V
2010-06-25 23:36 ` [PATCH:v4 12/13] OMAP: GPIO: Implement GPIO as a platform device Kevin Hilman
2010-06-24 7:03 ` [PATCH:v4 03/13] OMAP: GPIO: Include platform_data structure for GPIO DebBarma, Tarun Kanti
2010-07-06 13:17 ` [PATCH:v4 00/13] OMAP: GPIO: Implement GPIO in HWMOD way Tony Lindgren
2010-07-27 11:47 ` Cousson, Benoit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1277218916-15213-11-git-send-email-charu@ti.com \
--to=charu@ti.com \
--cc=b-cousson@ti.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-omap@vger.kernel.org \
--cc=p-basak2@ti.com \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).