From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ajay Kumar Gupta Subject: [PATCH 1/2] musb: Kill board specific pinmux from driver file Date: Thu, 8 Jul 2010 16:34:54 +0530 Message-ID: <1278587095-16978-2-git-send-email-ajay.gupta@ti.com> References: <1278587095-16978-1-git-send-email-ajay.gupta@ti.com> Return-path: In-Reply-To: <1278587095-16978-1-git-send-email-ajay.gupta-l0cyMroinI0@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, felipe.balbi-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org, gregkh-l3A5Bk7waGM@public.gmane.org, Anand Gadiyar , Ajay Kumar Gupta List-Id: linux-omap@vger.kernel.org From: Anand Gadiyar This pin-muxing is best done in the board files. The driver should not do this explicitly. Also, this code causes a warning to be thrown when OMAP2430 and OMAP3/4 support are enabled in the same kernel. Signed-off-by: Anand Gadiyar Acked-by: Felipe Balbi Signed-off-by: Ajay Kumar Gupta --- drivers/usb/musb/omap2430.c | 6 ------ 1 files changed, 0 insertions(+), 6 deletions(-) diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index e06d65e..2111a24 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -32,8 +32,6 @@ #include #include -#include - #include "musb_core.h" #include "omap2430.h" @@ -194,10 +192,6 @@ int __init musb_platform_init(struct musb *musb, void *board_data) u32 l; struct omap_musb_board_data *data = board_data; -#if defined(CONFIG_ARCH_OMAP2430) - omap_cfg_reg(AE5_2430_USB0HS_STP); -#endif