From: Enric Balletbo i Serra <eballetbo@gmail.com>
To: linux-omap@vger.kernel.org
Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com>,
Enric Balletbo i Serra <eballetbo@gmail.com>
Subject: [PATCH 3/4] omap3: fix and improve the LED handling on IGEP v2 board.
Date: Tue, 3 Aug 2010 13:56:13 +0200 [thread overview]
Message-ID: <1280836574-32467-4-git-send-email-eballetbo@gmail.com> (raw)
In-Reply-To: <1280836574-32467-1-git-send-email-eballetbo@gmail.com>
From: Enric Balletbo i Serra <eballetbo@iseebcn.com>
The IGEP v2 board has four leds, this patch allows control all
of these LEDs using the LED class if CONFIG_LEDS_GPIO is selected
or using the General Purpose Input/Output (GPIO) interface if
CONFIG_LEDS_GPIO is not selected.
Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
---
arch/arm/mach-omap2/board-igep0020.c | 103 ++++++++++++++++++++--------------
1 files changed, 61 insertions(+), 42 deletions(-)
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index d88fc08..6868dda 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -272,6 +272,54 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#include <linux/leds.h>
+
+static struct gpio_led igep2_gpio_leds[] = {
+ [0] = {
+ .name = "led0:red",
+ .gpio = IGEP2_GPIO_LED0_RED,
+ .default_trigger = "default-off",
+ },
+ [1] = {
+ .name = "led0:green",
+ .gpio = IGEP2_GPIO_LED0_GREEN,
+ .default_trigger = "default-off",
+ },
+ [2] = {
+ .name = "led1:red",
+ .gpio = IGEP2_GPIO_LED1_RED,
+ .default_trigger = "default-off",
+ },
+ [3] = {
+ .name = "led1:green",
+ .default_trigger = "heartbeat",
+ .gpio = -EINVAL, /* gets replaced */
+ },
+};
+
+static struct gpio_led_platform_data igep2_led_pdata = {
+ .leds = igep2_gpio_leds,
+ .num_leds = ARRAY_SIZE(igep2_gpio_leds),
+};
+
+static struct platform_device igep2_led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &igep2_led_pdata,
+ },
+};
+
+static void __init igep2_init_led(void)
+{
+ platform_device_register(&igep2_led_device);
+}
+
+#else
+static inline void igep2_init_led(void) {}
+#endif
+
static int igep2_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
@@ -295,6 +343,18 @@ static int igep2_twl_gpio_setup(struct device *dev,
gpio_request(gpio + TWL4030_GPIO_MAX, "GPIO_USB_CPEN");
gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+ /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
+#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
+ if ((gpio_request(gpio + TWL4030_GPIO_MAX + 1, "led1:green") == 0) &&
+ (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) {
+ gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
+ gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0);
+ } else
+ pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n");
+#else
+ igep2_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;
+#endif
+
return 0;
};
@@ -302,7 +362,7 @@ static struct twl4030_gpio_platform_data igep2_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
- .use_leds = false,
+ .use_leds = true,
.setup = igep2_twl_gpio_setup,
};
@@ -376,47 +436,6 @@ static void __init igep2_display_init(void)
pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
}
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led igep2_gpio_leds[] = {
- {
- .name = "led0:red",
- .gpio = IGEP2_GPIO_LED0_RED,
- },
- {
- .name = "led0:green",
- .default_trigger = "heartbeat",
- .gpio = IGEP2_GPIO_LED0_GREEN,
- },
- {
- .name = "led1:red",
- .gpio = IGEP2_GPIO_LED1_RED,
- },
-};
-
-static struct gpio_led_platform_data igep2_led_pdata = {
- .leds = igep2_gpio_leds,
- .num_leds = ARRAY_SIZE(igep2_gpio_leds),
-};
-
-static struct platform_device igep2_led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &igep2_led_pdata,
- },
-};
-
-static void __init igep2_init_led(void)
-{
- platform_device_register(&igep2_led_device);
-}
-
-#else
-static inline void igep2_init_led(void) {}
-#endif
-
static struct platform_device *igep2_devices[] __initdata = {
&igep2_dss_device,
};
--
1.7.0.4
next prev parent reply other threads:[~2010-08-03 11:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-03 11:56 [PATCH 0/4] omap3: Various fixes for IGEP platforms Enric Balletbo i Serra
2010-08-03 11:56 ` [PATCH 1/4] omap3: GPIO's for W-LAN + Bluetooth combo depends on IGEP v2 hardware revision Enric Balletbo i Serra
2010-08-03 11:56 ` [PATCH 2/4] omap3: configure GPIO's for external VBUS power switch and overcurrent detect on IGEP v2 board Enric Balletbo i Serra
2010-08-03 11:56 ` Enric Balletbo i Serra [this message]
2010-08-03 11:56 ` [PATCH 4/4] omap3: Add minimal OMAP3 IGEP module support Enric Balletbo i Serra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1280836574-32467-4-git-send-email-eballetbo@gmail.com \
--to=eballetbo@gmail.com \
--cc=eballetbo@iseebcn.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).