From: Rajendra Nayak <rnayak@ti.com>
To: linux-omap@vger.kernel.org
Cc: Rajendra Nayak <rnayak@ti.com>, Paul Walmsley <paul@pwsan.com>,
Kevin Hilman <khilman@deeprootsystems.com>
Subject: [PATCH 3/5] OMAP3: hwmod: add I2C hwmods for OMAP3430
Date: Mon, 9 Aug 2010 20:06:24 +0530 [thread overview]
Message-ID: <1281364586-26323-3-git-send-email-rnayak@ti.com> (raw)
In-Reply-To: <1281364586-26323-2-git-send-email-rnayak@ti.com>
Add hwmod structures for I2C controllers on OMAP3430.
This patch was developed in collaboration with Paul Walmsley <paul@pwsan.com>.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
---
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 232 ++++++++++++++++++++++++++++
arch/arm/mach-omap2/prm-regbits-34xx.h | 3 +
arch/arm/plat-omap/include/plat/i2c.h | 13 ++
arch/arm/plat-omap/include/plat/l4_3xxx.h | 24 +++
4 files changed, 272 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/plat-omap/include/plat/l4_3xxx.h
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 5d8eb58..7ef093f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -17,6 +17,9 @@
#include <mach/irqs.h>
#include <plat/cpu.h>
#include <plat/dma.h>
+#include <plat/l4_3xxx.h>
+#include <plat/i2c.h>
+#include <plat/omap34xx.h>
#include "omap_hwmod_common_data.h"
@@ -36,6 +39,9 @@ static struct omap_hwmod omap3xxx_iva_hwmod;
static struct omap_hwmod omap3xxx_l3_main_hwmod;
static struct omap_hwmod omap3xxx_l4_core_hwmod;
static struct omap_hwmod omap3xxx_l4_per_hwmod;
+static struct omap_hwmod omap3xxx_i2c1_hwmod;
+static struct omap_hwmod omap3xxx_i2c2_hwmod;
+static struct omap_hwmod omap3xxx_i2c3_hwmod;
/* L3 -> L4_CORE interface */
static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
@@ -90,6 +96,85 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+
+/* I2C IP block address space length (in bytes) */
+#define OMAP2_I2C_AS_LEN 128
+
+/* L4 CORE -> I2C1 interface */
+static struct omap_hwmod_addr_space omap3xxx_i2c1_addr_space[] = {
+ {
+ .pa_start = 0x48070000,
+ .pa_end = 0x48070000 + OMAP2_I2C_AS_LEN - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_i2c1_hwmod,
+ .clk = "i2c1_ick",
+ .addr = omap3xxx_i2c1_addr_space,
+ .addr_cnt = ARRAY_SIZE(omap3xxx_i2c1_addr_space),
+ .fw = {
+ .omap2 = {
+ .l4_fw_region = OMAP3_L4_CORE_FW_I2C1_REGION,
+ .l4_prot_group = 7,
+ .flags = OMAP_FIREWALL_L4,
+ }
+ },
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> I2C2 interface */
+static struct omap_hwmod_addr_space omap3xxx_i2c2_addr_space[] = {
+ {
+ .pa_start = 0x48072000,
+ .pa_end = 0x48072000 + OMAP2_I2C_AS_LEN - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_core__i2c2 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_i2c2_hwmod,
+ .clk = "i2c2_ick",
+ .addr = omap3xxx_i2c2_addr_space,
+ .addr_cnt = ARRAY_SIZE(omap3xxx_i2c2_addr_space),
+ .fw = {
+ .omap2 = {
+ .l4_fw_region = OMAP3_L4_CORE_FW_I2C2_REGION,
+ .l4_prot_group = 7,
+ .flags = OMAP_FIREWALL_L4,
+ }
+ },
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> I2C3 interface */
+static struct omap_hwmod_addr_space omap3xxx_i2c3_addr_space[] = {
+ {
+ .pa_start = 0x48060000,
+ .pa_end = 0x48060000 + OMAP2_I2C_AS_LEN - 1,
+ .flags = ADDR_TYPE_RT,
+ },
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_i2c3_hwmod,
+ .clk = "i2c3_ick",
+ .addr = omap3xxx_i2c3_addr_space,
+ .addr_cnt = ARRAY_SIZE(omap3xxx_i2c3_addr_space),
+ .fw = {
+ .omap2 = {
+ .l4_fw_region = OMAP3_L4_CORE_FW_I2C3_REGION,
+ .l4_prot_group = 7,
+ .flags = OMAP_FIREWALL_L4,
+ }
+ },
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* Slave interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = {
&omap3xxx_l3_main__l4_core,
@@ -98,6 +183,9 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = {
/* Master interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap3xxx_l4_core_masters[] = {
&omap3xxx_l4_core__l4_wkup,
+ &omap3_l4_core__i2c1,
+ &omap3_l4_core__i2c2,
+ &omap3_l4_core__i2c3,
};
/* L4 CORE */
@@ -197,6 +285,147 @@ static struct omap_hwmod omap3xxx_iva_hwmod = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
+
+/* I2C common */
+static struct omap_hwmod_class_sysconfig i2c_sysc = {
+ .rev_offs = 0x00,
+ .sysc_offs = 0x20,
+ .syss_offs = 0x10,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class i2c_class = {
+ .name = "i2c",
+ .sysc = &i2c_sysc,
+};
+
+/* I2C1 */
+
+static struct omap_i2c_dev_attr i2c1_dev_attr = {
+ .fifo_depth = 8, /* bytes */
+};
+
+static struct omap_hwmod_irq_info i2c1_mpu_irqs[] = {
+ { .irq = INT_24XX_I2C1_IRQ, },
+};
+
+static struct omap_hwmod_dma_info i2c1_sdma_chs[] = {
+ { .name = "tx", .dma_ch = OMAP24XX_DMA_I2C1_TX },
+ { .name = "rx", .dma_ch = OMAP24XX_DMA_I2C1_RX },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = {
+ &omap3_l4_core__i2c1,
+};
+
+static struct omap_hwmod omap3xxx_i2c1_hwmod = {
+ .name = "i2c1",
+ .mpu_irqs = i2c1_mpu_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(i2c1_mpu_irqs),
+ .sdma_chs = i2c1_sdma_chs,
+ .sdma_chs_cnt = ARRAY_SIZE(i2c1_sdma_chs),
+ .main_clk = "i2c1_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_GRPSEL_I2C1_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_GRPSEL_I2C1_SHIFT,
+ },
+ },
+ .slaves = omap3xxx_i2c1_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_i2c1_slaves),
+ .class = &i2c_class,
+ .dev_attr = &i2c1_dev_attr,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* I2C2 */
+
+static struct omap_i2c_dev_attr i2c2_dev_attr = {
+ .fifo_depth = 8, /* bytes */
+};
+
+static struct omap_hwmod_irq_info i2c2_mpu_irqs[] = {
+ { .irq = INT_24XX_I2C2_IRQ, },
+};
+
+static struct omap_hwmod_dma_info i2c2_sdma_chs[] = {
+ { .name = "tx", .dma_ch = OMAP24XX_DMA_I2C2_TX },
+ { .name = "rx", .dma_ch = OMAP24XX_DMA_I2C2_RX },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = {
+ &omap3_l4_core__i2c2,
+};
+
+static struct omap_hwmod omap3xxx_i2c2_hwmod = {
+ .name = "i2c2",
+ .mpu_irqs = i2c2_mpu_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(i2c2_mpu_irqs),
+ .sdma_chs = i2c2_sdma_chs,
+ .sdma_chs_cnt = ARRAY_SIZE(i2c2_sdma_chs),
+ .main_clk = "i2c2_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_GRPSEL_I2C2_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_GRPSEL_I2C2_SHIFT,
+ },
+ },
+ .slaves = omap3xxx_i2c2_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_i2c2_slaves),
+ .class = &i2c_class,
+ .dev_attr = &i2c2_dev_attr,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* I2C3 */
+
+static struct omap_i2c_dev_attr i2c3_dev_attr = {
+ .fifo_depth = 64, /* bytes */
+};
+
+static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
+ { .irq = INT_34XX_I2C3_IRQ, },
+};
+
+static struct omap_hwmod_dma_info i2c3_sdma_chs[] = {
+ { .name = "tx", .dma_ch = OMAP34XX_DMA_I2C3_TX },
+ { .name = "rx", .dma_ch = OMAP34XX_DMA_I2C3_RX },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_i2c3_slaves[] = {
+ &omap3_l4_core__i2c3,
+};
+
+static struct omap_hwmod omap3xxx_i2c3_hwmod = {
+ .name = "i2c3",
+ .mpu_irqs = i2c3_mpu_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(i2c3_mpu_irqs),
+ .sdma_chs = i2c3_sdma_chs,
+ .sdma_chs_cnt = ARRAY_SIZE(i2c3_sdma_chs),
+ .main_clk = "i2c3_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_GRPSEL_I2C3_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_GRPSEL_I2C3_SHIFT,
+ },
+ },
+ .slaves = omap3xxx_i2c3_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_i2c3_slaves),
+ .class = &i2c_class,
+ .dev_attr = &i2c3_dev_attr,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
&omap3xxx_l3_main_hwmod,
&omap3xxx_l4_core_hwmod,
@@ -204,6 +433,9 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
&omap3xxx_l4_wkup_hwmod,
&omap3xxx_mpu_hwmod,
&omap3xxx_iva_hwmod,
+ &omap3xxx_i2c1_hwmod,
+ &omap3xxx_i2c2_hwmod,
+ &omap3xxx_i2c3_hwmod,
NULL,
};
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index 7fd6023..51c354e 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -101,8 +101,11 @@
#define OMAP3430_GRPSEL_MCSPI3_MASK (1 << 20)
#define OMAP3430_GRPSEL_MCSPI2_MASK (1 << 19)
#define OMAP3430_GRPSEL_MCSPI1_MASK (1 << 18)
+#define OMAP3430_GRPSEL_I2C3_SHIFT 17
#define OMAP3430_GRPSEL_I2C3_MASK (1 << 17)
+#define OMAP3430_GRPSEL_I2C2_SHIFT 16
#define OMAP3430_GRPSEL_I2C2_MASK (1 << 16)
+#define OMAP3430_GRPSEL_I2C1_SHIFT 15
#define OMAP3430_GRPSEL_I2C1_MASK (1 << 15)
#define OMAP3430_GRPSEL_UART2_MASK (1 << 14)
#define OMAP3430_GRPSEL_UART1_MASK (1 << 13)
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
index 87f6bf2..255c756 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -34,5 +34,18 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
}
#endif
+/**
+ * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
+ * @fifo_depth: total controller FIFO size (in bytes)
+ * @flags: differences in hardware support capability
+ *
+ * @fifo_depth represents what exists on the hardware, not what is
+ * actually configured at runtime by the device driver.
+ */
+struct omap_i2c_dev_attr {
+ u8 fifo_depth;
+ u8 flags;
+};
+
void __init omap1_i2c_mux_pins(int bus_id);
void __init omap2_i2c_mux_pins(int bus_id);
diff --git a/arch/arm/plat-omap/include/plat/l4_3xxx.h b/arch/arm/plat-omap/include/plat/l4_3xxx.h
new file mode 100644
index 0000000..5e19493
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/l4_3xxx.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-omap/include/mach/l4_3xxx.h - L4 firewall definitions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
+
+/* L4 CORE */
+#define OMAP3_L4_CORE_FW_I2C1_REGION 21
+#define OMAP3_L4_CORE_FW_I2C1_TA_REGION 22
+#define OMAP3_L4_CORE_FW_I2C2_REGION 23
+#define OMAP3_L4_CORE_FW_I2C2_TA_REGION 24
+#define OMAP3_L4_CORE_FW_I2C3_REGION 73
+#define OMAP3_L4_CORE_FW_I2C3_TA_REGION 74
+
+#endif
--
1.5.4.7
next prev parent reply other threads:[~2010-08-09 14:36 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-09 14:36 [PATCH 1/5] OMAP4: runtime: Enable PM runtime core for OMAP4 Rajendra Nayak
2010-08-09 14:36 ` [PATCH 2/5] OMAP2xxx: hwmod: add I2C hwmods for OMAP2420, 2430 Rajendra Nayak
2010-08-09 14:36 ` Rajendra Nayak [this message]
2010-08-09 14:36 ` [PATCH 4/5] OMAP: I2C: split device registration; convert OMAP2+ to omap_device Rajendra Nayak
2010-08-09 14:36 ` [PATCH 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's Rajendra Nayak
2010-08-23 22:23 ` Kevin Hilman
2010-08-25 8:43 ` Nayak, Rajendra
2010-08-23 22:18 ` [PATCH 2/5] OMAP2xxx: hwmod: add I2C hwmods for OMAP2420, 2430 Kevin Hilman
2010-08-25 8:42 ` Nayak, Rajendra
2010-08-23 22:16 ` [PATCH 1/5] OMAP4: runtime: Enable PM runtime core for OMAP4 Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1281364586-26323-3-git-send-email-rnayak@ti.com \
--to=rnayak@ti.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).