From: Thara Gopinath <thara@ti.com>
To: linux-omap@vger.kernel.org
Cc: khilman@deeprootsystems.com, paul@pwsan.com,
vishwanath.bs@ti.com, sawant@ti.com, b-cousson@ti.com,
thara gopinath <thara@ti.com>
Subject: [PATCH 00/10] OMAP4: Smartreflex and Voltage layer support
Date: Wed, 18 Aug 2010 16:46:21 +0530 [thread overview]
Message-ID: <1282130191-9062-1-git-send-email-thara@ti.com> (raw)
From: thara gopinath <thara@ti.com>
This patch series adds support for OMAP4 support in the
smartreflex and voltage layer. The series involves extensions
to voltage layer and smartreflex layer for supporting OMAP4.
In addition it involves changes to pm debugfs layer to support
OMAP4 so that smartreflex and voltage debug entries can be
viewed, changes in opp layer so that opp layer gets enabled
for OMAP4, some changes in OMAP4 clock database and finally
addition of OMAP4 opp tables.
All these patches might not be dependent on voltage and
smartreflex layer but is required for the correct
functionality of these layers for OMAP4.
This series in based off origin/pm-opp branch off
Kevin Hilman's PM tree which is effectively 2.6.35 with
basic opp support added. But for this series to compile
and work properly one will have to apply the following
additional patches in the below mentioned order before
applying this series.
https://patchwork.kernel.org/patch/119544/
https://patchwork.kernel.org/patch/117347/
https://patchwork.kernel.org/patch/117348/
https://patchwork.kernel.org/patch/117349/
http://marc.info/?l=linux-omap&m=128162263809748&w=2
https://patchwork.kernel.org/patch/119854/
all 5 patches from origin/pm-cpufreq branch off Kevin's pm tree
http://marc.info/?l=linux-omap&m=128170725127719&w=2
- all eight patches in this series
This patch series has been tested on OMAP4430 SDP with omap3_defconfig
with the following menuconfig options enabled
System type -> TI OMAP Implementations -> Smartreflex Support
System type -> TI OMAP Implementations ->
Class 3 mode of Smartreflex Implementation
Benoit Cousson (1):
OMAP4: hwmod: Add inital data for smartreflex modules.
Thara Gopinath (9):
OMAP4: PM debugfs support
OMAP4: OPP framework support
OMAP4: Add the new voltage to vsel calculation formula
OMAP4: Extend clock data.
OMAP4: Adding voltage driver support
OMAP4: Adding dev atrributes to OMAP4 smartreflex hwmod data
OMAP4: Smartreflex framework extensions
OMAP4: Enabling smartrefles class 3 driver.
OMAP4: Add opp tables.
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/board-4430sdp.c | 2 +
arch/arm/mach-omap2/clock44xx_data.c | 40 ++++-
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 220 +++++++++++++++++++++++++
arch/arm/mach-omap2/opp44xx.h | 26 +++
arch/arm/mach-omap2/opp44xx_data.c | 80 +++++++++
arch/arm/mach-omap2/pm-debug.c | 53 +++++-
arch/arm/mach-omap2/pm.c | 6 +-
arch/arm/mach-omap2/smartreflex.c | 7 +-
arch/arm/mach-omap2/sr_device.c | 21 ++-
arch/arm/mach-omap2/voltage.c | 246 +++++++++++++++++++++++++++-
arch/arm/plat-omap/Kconfig | 2 +-
arch/arm/plat-omap/Makefile | 1 +
arch/arm/plat-omap/include/plat/control.h | 12 ++
arch/arm/plat-omap/include/plat/voltage.h | 20 ++-
arch/arm/plat-omap/opp_twl_tps.c | 8 +
16 files changed, 721 insertions(+), 25 deletions(-)
create mode 100644 arch/arm/mach-omap2/opp44xx.h
create mode 100644 arch/arm/mach-omap2/opp44xx_data.c
--
1.7.1.GIT
next reply other threads:[~2010-08-18 11:16 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-18 11:16 Thara Gopinath [this message]
2010-08-18 11:16 ` [PATCH 01/10] OMAP4: PM debugfs support Thara Gopinath
2010-08-18 11:16 ` [PATCH 02/10] OMAP4: OPP framework support Thara Gopinath
2010-08-18 11:16 ` [PATCH 03/10] OMAP4: Add the new voltage to vsel calculation formula Thara Gopinath
2010-08-18 11:16 ` [PATCH 04/10] OMAP4: Extend clock data Thara Gopinath
2010-08-18 11:16 ` [PATCH 05/10] OMAP4: Adding voltage driver support Thara Gopinath
2010-08-25 23:08 ` Kevin Hilman
2010-08-18 11:16 ` [PATCH 06/10] OMAP4: hwmod: Add inital data for smartreflex modules Thara Gopinath
2010-08-18 11:16 ` [PATCH 07/10] OMAP4: Adding dev atrributes to OMAP4 smartreflex hwmod data Thara Gopinath
2010-08-18 11:16 ` [PATCH 08/10] OMAP4: Smartreflex framework extensions Thara Gopinath
2010-08-25 23:12 ` Kevin Hilman
2010-08-26 5:12 ` Shilimkar, Santosh
2010-08-18 11:16 ` [PATCH 09/10] OMAP4: Enabling smartrefles class 3 driver Thara Gopinath
2010-08-18 11:16 ` [PATCH 10/10] OMAP4: Add opp tables Thara Gopinath
2010-08-25 23:15 ` Kevin Hilman
2010-08-25 23:24 ` Kevin Hilman
2010-08-25 22:58 ` [PATCH 00/10] OMAP4: Smartreflex and Voltage layer support Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1282130191-9062-1-git-send-email-thara@ti.com \
--to=thara@ti.com \
--cc=b-cousson@ti.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=sawant@ti.com \
--cc=vishwanath.bs@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox