From: Rajendra Nayak <rnayak@ti.com>
To: linux-omap@vger.kernel.org
Cc: Rajendra Nayak <rnayak@ti.com>, Benoit Cousson <b-cousson@ti.com>
Subject: [PATCH v2 3/5] OMAP4: hwmod: add I2C hwmods for OMAP4430
Date: Fri, 17 Sep 2010 20:07:07 +0530 [thread overview]
Message-ID: <1284734229-16281-4-git-send-email-rnayak@ti.com> (raw)
In-Reply-To: <1284734229-16281-3-git-send-email-rnayak@ti.com>
Add hwmod structures for I2C controllers on OMAP4430.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
---
This patch is extracted from the below patch
OMAP4: hwmod: Add initial data for OMAP4430 ES1 & ES2
https://patchwork.kernel.org/patch/117347/
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 237 ++++++++++++++++++++++++++++
1 files changed, 237 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index e20b0ee..2cb63fc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -383,6 +383,238 @@ static struct omap_hwmod omap44xx_l4_wkup_hwmod = {
};
/*
+ * 'i2c' class
+ * multimaster high-speed i2c controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = {
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0090,
+ .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_i2c_hwmod_class = {
+ .name = "i2c",
+ .sysc = &omap44xx_i2c_sysc,
+};
+
+/* i2c1 */
+static struct omap_hwmod omap44xx_i2c1_hwmod;
+static struct omap_hwmod_irq_info omap44xx_i2c1_irqs[] = {
+ { .irq = 56 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_i2c1_sdma_reqs[] = {
+ { .name = "tx", .dma_req = 26 + OMAP44XX_DMA_REQ_START },
+ { .name = "rx", .dma_req = 27 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_i2c1_addrs[] = {
+ {
+ .pa_start = 0x48070000,
+ .pa_end = 0x480700ff,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+/* l4_per -> i2c1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c1 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_i2c1_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_i2c1_addrs,
+ .addr_cnt = ARRAY_SIZE(omap44xx_i2c1_addrs),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* i2c1 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_i2c1_slaves[] = {
+ &omap44xx_l4_per__i2c1,
+};
+
+static struct omap_hwmod omap44xx_i2c1_hwmod = {
+ .name = "i2c1",
+ .class = &omap44xx_i2c_hwmod_class,
+ .flags = HWMOD_INIT_NO_RESET,
+ .mpu_irqs = omap44xx_i2c1_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_i2c1_irqs),
+ .sdma_reqs = omap44xx_i2c1_sdma_reqs,
+ .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_i2c1_sdma_reqs),
+ .main_clk = "i2c1_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_reg = OMAP4430_CM_L4PER_I2C1_CLKCTRL,
+ },
+ },
+ .slaves = omap44xx_i2c1_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_i2c1_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* i2c2 */
+static struct omap_hwmod omap44xx_i2c2_hwmod;
+static struct omap_hwmod_irq_info omap44xx_i2c2_irqs[] = {
+ { .irq = 57 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_i2c2_sdma_reqs[] = {
+ { .name = "tx", .dma_req = 28 + OMAP44XX_DMA_REQ_START },
+ { .name = "rx", .dma_req = 29 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_i2c2_addrs[] = {
+ {
+ .pa_start = 0x48072000,
+ .pa_end = 0x480720ff,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+/* l4_per -> i2c2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c2 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_i2c2_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_i2c2_addrs,
+ .addr_cnt = ARRAY_SIZE(omap44xx_i2c2_addrs),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* i2c2 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_i2c2_slaves[] = {
+ &omap44xx_l4_per__i2c2,
+};
+
+static struct omap_hwmod omap44xx_i2c2_hwmod = {
+ .name = "i2c2",
+ .class = &omap44xx_i2c_hwmod_class,
+ .flags = HWMOD_INIT_NO_RESET,
+ .mpu_irqs = omap44xx_i2c2_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_i2c2_irqs),
+ .sdma_reqs = omap44xx_i2c2_sdma_reqs,
+ .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_i2c2_sdma_reqs),
+ .main_clk = "i2c2_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_reg = OMAP4430_CM_L4PER_I2C2_CLKCTRL,
+ },
+ },
+ .slaves = omap44xx_i2c2_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_i2c2_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* i2c3 */
+static struct omap_hwmod omap44xx_i2c3_hwmod;
+static struct omap_hwmod_irq_info omap44xx_i2c3_irqs[] = {
+ { .irq = 61 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_i2c3_sdma_reqs[] = {
+ { .name = "tx", .dma_req = 24 + OMAP44XX_DMA_REQ_START },
+ { .name = "rx", .dma_req = 25 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_i2c3_addrs[] = {
+ {
+ .pa_start = 0x48060000,
+ .pa_end = 0x480600ff,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+/* l4_per -> i2c3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c3 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_i2c3_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_i2c3_addrs,
+ .addr_cnt = ARRAY_SIZE(omap44xx_i2c3_addrs),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* i2c3 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_i2c3_slaves[] = {
+ &omap44xx_l4_per__i2c3,
+};
+
+static struct omap_hwmod omap44xx_i2c3_hwmod = {
+ .name = "i2c3",
+ .class = &omap44xx_i2c_hwmod_class,
+ .flags = HWMOD_INIT_NO_RESET,
+ .mpu_irqs = omap44xx_i2c3_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_i2c3_irqs),
+ .sdma_reqs = omap44xx_i2c3_sdma_reqs,
+ .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_i2c3_sdma_reqs),
+ .main_clk = "i2c3_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_reg = OMAP4430_CM_L4PER_I2C3_CLKCTRL,
+ },
+ },
+ .slaves = omap44xx_i2c3_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_i2c3_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* i2c4 */
+static struct omap_hwmod omap44xx_i2c4_hwmod;
+static struct omap_hwmod_irq_info omap44xx_i2c4_irqs[] = {
+ { .irq = 62 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_i2c4_sdma_reqs[] = {
+ { .name = "tx", .dma_req = 123 + OMAP44XX_DMA_REQ_START },
+ { .name = "rx", .dma_req = 124 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_i2c4_addrs[] = {
+ {
+ .pa_start = 0x48350000,
+ .pa_end = 0x483500ff,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+/* l4_per -> i2c4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c4 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_i2c4_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_i2c4_addrs,
+ .addr_cnt = ARRAY_SIZE(omap44xx_i2c4_addrs),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* i2c4 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_i2c4_slaves[] = {
+ &omap44xx_l4_per__i2c4,
+};
+
+static struct omap_hwmod omap44xx_i2c4_hwmod = {
+ .name = "i2c4",
+ .class = &omap44xx_i2c_hwmod_class,
+ .flags = HWMOD_INIT_NO_RESET,
+ .mpu_irqs = omap44xx_i2c4_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_i2c4_irqs),
+ .sdma_reqs = omap44xx_i2c4_sdma_reqs,
+ .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_i2c4_sdma_reqs),
+ .main_clk = "i2c4_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_reg = OMAP4430_CM_L4PER_I2C4_CLKCTRL,
+ },
+ },
+ .slaves = omap44xx_i2c4_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_i2c4_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
* 'mpu_bus' class
* instance(s): mpu_private
*/
@@ -467,6 +699,11 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
&omap44xx_l4_cfg_hwmod,
&omap44xx_l4_per_hwmod,
&omap44xx_l4_wkup_hwmod,
+ /* i2c class */
+ &omap44xx_i2c1_hwmod,
+ &omap44xx_i2c2_hwmod,
+ &omap44xx_i2c3_hwmod,
+ &omap44xx_i2c4_hwmod,
/* mpu_bus class */
&omap44xx_mpu_private_hwmod,
--
1.7.0.4
next prev parent reply other threads:[~2010-09-17 14:37 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-17 14:37 [PATCH v2 0/5] Convert I2C driver to use omap_device/runtime PM Rajendra Nayak
2010-09-17 14:37 ` [PATCH v2 1/5] OMAP2xxx: hwmod: add I2C hwmods for OMAP2420, 2430 Rajendra Nayak
2010-09-17 14:37 ` [PATCH v2 2/5] OMAP3: hwmod: add I2C hwmods for OMAP3430 Rajendra Nayak
2010-09-17 14:37 ` Rajendra Nayak [this message]
2010-09-17 14:37 ` [PATCH v2 4/5] OMAP: I2C: split device registration and convert OMAP2+ to omap_device Rajendra Nayak
2010-09-17 14:37 ` [PATCH v2 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's Rajendra Nayak
2010-09-28 17:13 ` [PATCH v2 3/5] OMAP4: hwmod: add I2C hwmods for OMAP4430 Kevin Hilman
2010-09-28 17:59 ` Nayak, Rajendra
2010-09-21 7:16 ` [PATCH v2 2/5] OMAP3: hwmod: add I2C hwmods for OMAP3430 Paul Walmsley
2010-09-21 7:26 ` Nayak, Rajendra
2010-09-21 7:01 ` [PATCH v2 1/5] OMAP2xxx: hwmod: add I2C hwmods for OMAP2420, 2430 Paul Walmsley
2010-09-21 7:12 ` Paul Walmsley
2010-09-21 7:09 ` Paul Walmsley
2010-09-21 7:20 ` Nayak, Rajendra
2010-09-21 7:39 ` Paul Walmsley
2010-09-21 8:06 ` Paul Walmsley
2010-09-21 13:30 ` Nayak, Rajendra
2010-09-20 18:15 ` [PATCH v2 0/5] Convert I2C driver to use omap_device/runtime PM Kevin Hilman
2010-09-21 5:46 ` Nayak, Rajendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1284734229-16281-4-git-send-email-rnayak@ti.com \
--to=rnayak@ti.com \
--cc=b-cousson@ti.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox