From: Hema HK <hemahk@ti.com>
To: linux-omap@vger.kernel.org, linux-usb@vger.kernel.org
Cc: Hema HK <hemahk@ti.com>, Felipe Balbi <balbi@ti.com>,
Tony Lindgren <tony@atomide.com>,
Kevin Hilman <khilman@deeprootsystems.com>,
"Cousson, Benoit" <b-cousson@ti.com>,
Paul Walmsley <paul@pwsan.com>
Subject: [PATCH 2/9 v3] usb: musb: Remove board_data parameter from musb_platform_init()
Date: Wed, 22 Sep 2010 20:27:40 -0400 [thread overview]
Message-ID: <1285201660-26309-1-git-send-email-hemahk@ti.com> (raw)
Removed the board_data parameter being passed to musb_platform_init function
as board data can be extracted from device structure which is already member of
musb structure.
Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Cousson, Benoit <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
---
drivers/usb/musb/blackfin.c | 2 +-
drivers/usb/musb/davinci.c | 2 +-
drivers/usb/musb/musb_core.c | 2 +-
drivers/usb/musb/musb_core.h | 2 +-
drivers/usb/musb/omap2430.c | 6 ++++--
drivers/usb/musb/tusb6010.c | 2 +-
6 files changed, 9 insertions(+), 7 deletions(-)
Index: linux-omap-pm/drivers/usb/musb/blackfin.c
===================================================================
--- linux-omap-pm.orig/drivers/usb/musb/blackfin.c
+++ linux-omap-pm/drivers/usb/musb/blackfin.c
@@ -323,7 +323,7 @@ int musb_platform_set_mode(struct musb *
return -EIO;
}
-int __init musb_platform_init(struct musb *musb, void *board_data)
+int __init musb_platform_init(struct musb *musb)
{
/*
Index: linux-omap-pm/drivers/usb/musb/davinci.c
===================================================================
--- linux-omap-pm.orig/drivers/usb/musb/davinci.c
+++ linux-omap-pm/drivers/usb/musb/davinci.c
@@ -376,7 +376,7 @@ int musb_platform_set_mode(struct musb *
return -EIO;
}
-int __init musb_platform_init(struct musb *musb, void *board_data)
+int __init musb_platform_init(struct musb *musb)
{
void __iomem *tibase = musb->ctrl_base;
u32 revision;
Index: linux-omap-pm/drivers/usb/musb/musb_core.c
===================================================================
--- linux-omap-pm.orig/drivers/usb/musb/musb_core.c
+++ linux-omap-pm/drivers/usb/musb/musb_core.c
@@ -2022,7 +2022,7 @@ bad_config:
* isp1504, non-OTG, etc) mostly hooking up through ULPI.
*/
musb->isr = generic_interrupt;
- status = musb_platform_init(musb, plat->board_data);
+ status = musb_platform_init(musb);
if (status < 0)
goto fail2;
Index: linux-omap-pm/drivers/usb/musb/musb_core.h
===================================================================
--- linux-omap-pm.orig/drivers/usb/musb/musb_core.h
+++ linux-omap-pm/drivers/usb/musb/musb_core.h
@@ -612,7 +612,7 @@ extern int musb_platform_get_vbus_status
#define musb_platform_get_vbus_status(x) 0
#endif
-extern int __init musb_platform_init(struct musb *musb, void *board_data);
+extern int __init musb_platform_init(struct musb *musb);
extern int musb_platform_exit(struct musb *musb);
#endif /* __MUSB_CORE_H__ */
Index: linux-omap-pm/drivers/usb/musb/omap2430.c
===================================================================
--- linux-omap-pm.orig/drivers/usb/musb/omap2430.c
+++ linux-omap-pm/drivers/usb/musb/omap2430.c
@@ -187,10 +187,12 @@ int musb_platform_set_mode(struct musb *
return 0;
}
-int __init musb_platform_init(struct musb *musb, void *board_data)
+int __init musb_platform_init(struct musb *musb)
{
u32 l;
- struct omap_musb_board_data *data = board_data;
+ struct device *dev = musb->controller;
+ struct musb_hdrc_platform_data *plat = dev->platform_data;
+ struct omap_musb_board_data *data = plat->board_data;
/* We require some kind of external transceiver, hooked
* up through ULPI. TWL4030-family PMICs include one,
Index: linux-omap-pm/drivers/usb/musb/tusb6010.c
===================================================================
--- linux-omap-pm.orig/drivers/usb/musb/tusb6010.c
+++ linux-omap-pm/drivers/usb/musb/tusb6010.c
@@ -1091,7 +1091,7 @@ err:
return -ENODEV;
}
-int __init musb_platform_init(struct musb *musb, void *board_data)
+int __init musb_platform_init(struct musb *musb)
{
struct platform_device *pdev;
struct resource *mem;
next reply other threads:[~2010-09-22 14:57 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-23 0:27 Hema HK [this message]
2010-09-29 7:00 ` [PATCH 2/9 v3] usb: musb: Remove board_data parameter from musb_platform_init() Kalliguddi, Hema
[not found] ` <E0D41E29EB0DAC4E9F3FF173962E9E9402DB7FE390-/tLxBxkBPtCIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2010-09-29 7:02 ` Felipe Balbi
[not found] ` <1285201660-26309-1-git-send-email-hemahk-l0cyMroinI0@public.gmane.org>
2010-09-29 14:41 ` Kevin Hilman
[not found] ` <871v8c629u.fsf-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2010-12-10 19:30 ` Sergei Shtylyov
2010-12-10 20:29 ` Greg KH
[not found] ` <20101210202906.GB23759-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
2010-12-10 21:07 ` Sergei Shtylyov
[not found] ` <4D038C9A.3070306@ru.mvista.com>
[not found] ` <20101211174344.GA31964@kroah.com>
[not found] ` <20101211174344.GA31964-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
2010-12-12 13:55 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1285201660-26309-1-git-send-email-hemahk@ti.com \
--to=hemahk@ti.com \
--cc=b-cousson@ti.com \
--cc=balbi@ti.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).