From mboxrd@z Thu Jan 1 00:00:00 1970 From: Samreen Subject: [PATCH v4] OMAP3: DSS: Kconfig changes to enable display options on OMAP3 Date: Tue, 26 Oct 2010 08:47:54 +0530 Message-ID: <1288063074-8879-1-git-send-email-samreen@ti.com> Return-path: Received: from arroyo.ext.ti.com ([192.94.94.40]:33536 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755944Ab0JZDXN (ORCPT ); Mon, 25 Oct 2010 23:23:13 -0400 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Tomi Valkeinen , Grazvydas Ignotas , Vaibhav Hiremath , Roger Quadros , Senthilvadivu Cc: linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org, Samreen The defconfig options for display are taken in the respective Kconfig to enable display by default on OMAP3 platforms Signed-off-by: Samreen --- Version4: Remove the enabling of the display panels by default. Version3: Eliminate the separate default number of FBs for different architecture. Keeping default FBs as 3 as before. Version2: Enables by default NEC panel used in zoom2/3/3630sdp, instead of Sharp LQ043T1DG01 panel enabled in previous version of this patch. drivers/video/omap2/dss/Kconfig | 6 ++++-- drivers/video/omap2/omapfb/Kconfig | 1 + 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig index 43b6440..f3244a2 100644 --- a/drivers/video/omap2/dss/Kconfig +++ b/drivers/video/omap2/dss/Kconfig @@ -1,6 +1,7 @@ menuconfig OMAP2_DSS tristate "OMAP2/3 Display Subsystem support (EXPERIMENTAL)" depends on ARCH_OMAP2 || ARCH_OMAP3 + default y help OMAP2/3 Display Subsystem support. @@ -9,7 +10,7 @@ if OMAP2_DSS config OMAP2_VRAM_SIZE int "VRAM size (MB)" range 0 32 - default 0 + default 4 help The amount of SDRAM to reserve at boot time for video RAM use. This VRAM will be used by omapfb and other drivers that need @@ -102,7 +103,8 @@ config OMAP2_DSS_FAKE_VSYNC config OMAP2_DSS_MIN_FCK_PER_PCK int "Minimum FCK/PCK ratio (for scaling)" range 0 32 - default 0 + default 4 if ARCH_OMAP2 || ARCH_OMAP3 + default 0 if ARCH_OMAP4 help This can be used to adjust the minimum FCK/PCK ratio. diff --git a/drivers/video/omap2/omapfb/Kconfig b/drivers/video/omap2/omapfb/Kconfig index 65149b2..923bf48 100644 --- a/drivers/video/omap2/omapfb/Kconfig +++ b/drivers/video/omap2/omapfb/Kconfig @@ -1,6 +1,7 @@ menuconfig FB_OMAP2 tristate "OMAP2/3 frame buffer support (EXPERIMENTAL)" depends on FB && OMAP2_DSS + default y select OMAP2_VRAM select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3 -- 1.5.6.3