From: Archit Taneja <archit@ti.com>
To: tomi.valkeinen@nokia.com
Cc: linux-omap@vger.kernel.org, Sumit Semwal <sumit.semwal@ti.com>,
Mukund Mittal <mmittal@ti.com>, Samreen <samreen@ti.com>
Subject: [PATCH v4 7/7] OMAP: DSS2: Add new Overlay Manager
Date: Mon, 8 Nov 2010 17:54:25 +0530 [thread overview]
Message-ID: <1289219065-1362-8-git-send-email-archit@ti.com> (raw)
In-Reply-To: <1289219065-1362-1-git-send-email-archit@ti.com>
From: Sumit Semwal <sumit.semwal@ti.com>
Add new Overlay Manager in manager.c, make changes needed
for LCD2 channel.
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Mukund Mittal <mmittal@ti.com>
Signed-off-by: Samreen <samreen@ti.com>
---
drivers/video/omap2/dss/dispc.c | 21 +++++------
drivers/video/omap2/dss/dss.h | 4 +-
drivers/video/omap2/dss/manager.c | 73 +++++++++++++++++++++++--------------
drivers/video/omap2/dss/overlay.c | 14 ++++++-
4 files changed, 70 insertions(+), 42 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index e34c129..ab4ca0b 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1592,8 +1592,8 @@ static int _dispc_setup_plane(enum omap_plane plane,
bool ilace,
enum omap_dss_rotation_type rotation_type,
u8 rotation, int mirror,
- u8 global_alpha,
- u8 pre_mult_alpha)
+ u8 global_alpha, u8 pre_mult_alpha,
+ enum omap_channel channel)
{
const int maxdownscale = cpu_is_omap34xx() ? 4 : 2;
bool five_taps = 0;
@@ -1692,8 +1692,8 @@ static int _dispc_setup_plane(enum omap_plane plane,
five_taps = height > out_height * 2;
if (!five_taps) {
- fclk = calc_fclk(OMAP_DSS_CHANNEL_LCD, width, height,
- out_width, out_height);
+ fclk = calc_fclk(channel, width, height, out_width,
+ out_height);
/* Try 5-tap filter if 3-tap fclk is too high */
if (cpu_is_omap34xx() && height > out_height &&
@@ -1707,9 +1707,8 @@ static int _dispc_setup_plane(enum omap_plane plane,
}
if (five_taps)
- fclk = calc_fclk_five_taps(OMAP_DSS_CHANNEL_LCD, width,
- height, out_width, out_height,
- color_mode);
+ fclk = calc_fclk_five_taps(channel, width, height,
+ out_width, out_height, color_mode);
DSSDBG("required fclk rate = %lu Hz\n", fclk);
DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate());
@@ -3331,17 +3330,17 @@ int dispc_setup_plane(enum omap_plane plane,
bool ilace,
enum omap_dss_rotation_type rotation_type,
u8 rotation, bool mirror, u8 global_alpha,
- u8 pre_mult_alpha)
+ u8 pre_mult_alpha, enum omap_channel channel)
{
int r = 0;
DSSDBG("dispc_setup_plane %d, pa %x, sw %d, %d,%d, %dx%d -> "
- "%dx%d, ilace %d, cmode %x, rot %d, mir %d\n",
+ "%dx%d, ilace %d, cmode %x, rot %d, mir %d chan %d\n",
plane, paddr, screen_width, pos_x, pos_y,
width, height,
out_width, out_height,
ilace, color_mode,
- rotation, mirror);
+ rotation, mirror, channel);
enable_clocks(1);
@@ -3354,7 +3353,7 @@ int dispc_setup_plane(enum omap_plane plane,
rotation_type,
rotation, mirror,
global_alpha,
- pre_mult_alpha);
+ pre_mult_alpha, channel);
enable_clocks(0);
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 599df58..3072a76 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -359,8 +359,8 @@ int dispc_setup_plane(enum omap_plane plane,
bool ilace,
enum omap_dss_rotation_type rotation_type,
u8 rotation, bool mirror,
- u8 global_alpha,
- u8 pre_mult_alpha);
+ u8 global_alpha, u8 pre_mult_alpha,
+ enum omap_channel channel);
bool dispc_go_busy(enum omap_channel channel);
void dispc_go(enum omap_channel channel);
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 873b334..c345378 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -513,11 +513,14 @@ static int dss_mgr_wait_for_vsync(struct omap_overlay_manager *mgr)
unsigned long timeout = msecs_to_jiffies(500);
u32 irq;
- if (mgr->device->type == OMAP_DISPLAY_TYPE_VENC)
+ if (mgr->device->type == OMAP_DISPLAY_TYPE_VENC) {
irq = DISPC_IRQ_EVSYNC_ODD;
- else
- irq = DISPC_IRQ_VSYNC;
-
+ } else {
+ if (mgr->device->channel == OMAP_DSS_CHANNEL_LCD)
+ irq = DISPC_IRQ_VSYNC;
+ else
+ irq = DISPC_IRQ_VSYNC2;
+ }
return omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout);
}
@@ -525,7 +528,6 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
{
unsigned long timeout = msecs_to_jiffies(500);
struct manager_cache_data *mc;
- enum omap_channel channel;
u32 irq;
int r;
int i;
@@ -536,7 +538,6 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
- channel = OMAP_DSS_CHANNEL_DIGIT;
} else {
if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
enum omap_dss_update_mode mode;
@@ -544,11 +545,14 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
if (mode != OMAP_DSS_UPDATE_AUTO)
return 0;
- irq = DISPC_IRQ_FRAMEDONE;
+ irq = (dssdev->channel == OMAP_DSS_CHANNEL_LCD) ?
+ DISPC_IRQ_FRAMEDONE
+ : DISPC_IRQ_FRAMEDONE2;
} else {
- irq = DISPC_IRQ_VSYNC;
+ irq = (dssdev->channel == OMAP_DSS_CHANNEL_LCD) ?
+ DISPC_IRQ_VSYNC
+ : DISPC_IRQ_VSYNC2;
}
- channel = OMAP_DSS_CHANNEL_LCD;
}
mc = &dss_cache.manager_cache[mgr->id];
@@ -595,7 +599,6 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl)
{
unsigned long timeout = msecs_to_jiffies(500);
- enum omap_channel channel;
struct overlay_cache_data *oc;
struct omap_dss_device *dssdev;
u32 irq;
@@ -612,7 +615,6 @@ int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl)
if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
- channel = OMAP_DSS_CHANNEL_DIGIT;
} else {
if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
enum omap_dss_update_mode mode;
@@ -620,11 +622,14 @@ int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl)
if (mode != OMAP_DSS_UPDATE_AUTO)
return 0;
- irq = DISPC_IRQ_FRAMEDONE;
+ irq = (dssdev->channel == OMAP_DSS_CHANNEL_LCD) ?
+ DISPC_IRQ_FRAMEDONE
+ : DISPC_IRQ_FRAMEDONE2;
} else {
- irq = DISPC_IRQ_VSYNC;
+ irq = (dssdev->channel == OMAP_DSS_CHANNEL_LCD) ?
+ DISPC_IRQ_VSYNC
+ : DISPC_IRQ_VSYNC2;
}
- channel = OMAP_DSS_CHANNEL_LCD;
}
oc = &dss_cache.overlay_cache[ovl->id];
@@ -844,7 +849,8 @@ static int configure_overlay(enum omap_plane plane)
c->rotation,
c->mirror,
c->global_alpha,
- c->pre_mult_alpha);
+ c->pre_mult_alpha,
+ c->channel);
if (r) {
/* this shouldn't happen */
@@ -896,10 +902,10 @@ static int configure_dispc(void)
r = 0;
busy = false;
- mgr_busy[0] = dispc_go_busy(0);
- mgr_busy[1] = dispc_go_busy(1);
- mgr_go[0] = false;
- mgr_go[1] = false;
+ for (i = 0; i < num_mgrs; i++) {
+ mgr_busy[i] = dispc_go_busy(i);
+ mgr_go[i] = false;
+ }
/* Commit overlay settings */
for (i = 0; i < num_ovls; ++i) {
@@ -1158,9 +1164,10 @@ static void dss_apply_irq_handler(void *data, u32 mask)
const int num_mgrs = dss_feat_get_num_mgrs();
int i, r;
bool mgr_busy[MAX_DSS_MANAGERS];
+ u32 irq_mask;
- mgr_busy[0] = dispc_go_busy(0);
- mgr_busy[1] = dispc_go_busy(1);
+ for (i = 0; i < num_mgrs; i++)
+ mgr_busy[i] = dispc_go_busy(i);
spin_lock(&dss_cache.lock);
@@ -1191,9 +1198,12 @@ static void dss_apply_irq_handler(void *data, u32 mask)
goto end;
}
- omap_dispc_unregister_isr(dss_apply_irq_handler, NULL,
- DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_ODD |
- DISPC_IRQ_EVSYNC_EVEN);
+ irq_mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_ODD |
+ DISPC_IRQ_EVSYNC_EVEN;
+ if (dss_has_feature(FEAT_MGR_LCD2))
+ irq_mask |= DISPC_IRQ_VSYNC2;
+
+ omap_dispc_unregister_isr(dss_apply_irq_handler, NULL, irq_mask);
dss_cache.irq_enabled = false;
end:
@@ -1386,9 +1396,14 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr)
r = 0;
dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
if (!dss_cache.irq_enabled) {
- r = omap_dispc_register_isr(dss_apply_irq_handler, NULL,
- DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_ODD |
- DISPC_IRQ_EVSYNC_EVEN);
+ u32 mask;
+
+ mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_ODD |
+ DISPC_IRQ_EVSYNC_EVEN;
+ if (dss_has_feature(FEAT_MGR_LCD2))
+ mask |= DISPC_IRQ_VSYNC2;
+
+ r = omap_dispc_register_isr(dss_apply_irq_handler, NULL, mask);
dss_cache.irq_enabled = true;
}
configure_dispc();
@@ -1480,6 +1495,10 @@ int dss_init_overlay_managers(struct platform_device *pdev)
mgr->name = "tv";
mgr->id = OMAP_DSS_CHANNEL_DIGIT;
break;
+ case 2:
+ mgr->name = "lcd2";
+ mgr->id = OMAP_DSS_CHANNEL_LCD2;
+ break;
}
mgr->set_device = &omap_dss_set_device;
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 41a2902..456efef 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -664,12 +664,22 @@ void dss_recheck_connections(struct omap_dss_device *dssdev, bool force)
int i;
struct omap_overlay_manager *lcd_mgr;
struct omap_overlay_manager *tv_mgr;
+ struct omap_overlay_manager *lcd2_mgr = NULL;
struct omap_overlay_manager *mgr = NULL;
lcd_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_LCD);
tv_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_TV);
-
- if (dssdev->type != OMAP_DISPLAY_TYPE_VENC) {
+ if (dss_has_feature(FEAT_MGR_LCD2))
+ lcd2_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_LCD2);
+
+ if (dssdev->channel == OMAP_DSS_CHANNEL_LCD2) {
+ if (!lcd2_mgr->device || force) {
+ if (lcd2_mgr->device)
+ lcd2_mgr->unset_device(lcd2_mgr);
+ lcd2_mgr->set_device(lcd2_mgr, dssdev);
+ mgr = lcd2_mgr;
+ }
+ } else if (dssdev->type != OMAP_DISPLAY_TYPE_VENC) {
if (!lcd_mgr->device || force) {
if (lcd_mgr->device)
lcd_mgr->unset_device(lcd_mgr);
--
1.7.0.4
prev parent reply other threads:[~2010-11-08 12:24 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-08 12:24 [PATCH v4 0/7] OMAP: DSS2: Overlay Manager LCD2 support in DISPC Archit Taneja
2010-11-08 12:24 ` [PATCH v4 1/7] OMAP: DSS2: Add dss_features for omap4 and overlay manager related features Archit Taneja
2010-11-08 12:24 ` [PATCH v4 2/7] OMAP: DSS2: Represent DISPC register defines with channel as parameter Archit Taneja
2010-11-15 15:17 ` Tomi Valkeinen
2010-11-16 4:25 ` Taneja, Archit
2010-11-08 12:24 ` [PATCH v4 3/7] OMAP: DSS2: Introduce omap_channel as a omap_dss_device parameter Archit Taneja
2010-11-16 10:55 ` Tomi Valkeinen
2010-11-16 11:22 ` Taneja, Archit
2010-11-16 13:32 ` Tomi Valkeinen
2010-11-17 8:31 ` Taneja, Archit
2010-11-17 12:56 ` Taneja, Archit
2010-11-08 12:24 ` [PATCH v4 4/7] OMAP: DSS2: Change remaining Dispc functions for new 'channel' argument Archit Taneja
2010-11-08 12:24 ` [PATCH v4 5/7] OMAP: DSS2: LCD2 Channel Changes for DISPC Archit Taneja
2010-11-08 12:24 ` [PATCH v4 6/7] OMAP: DSS2: Use dss_features to handle DISPC bits removed on OMAP4 Archit Taneja
2010-11-08 12:24 ` Archit Taneja [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1289219065-1362-8-git-send-email-archit@ti.com \
--to=archit@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=mmittal@ti.com \
--cc=samreen@ti.com \
--cc=sumit.semwal@ti.com \
--cc=tomi.valkeinen@nokia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox