From mboxrd@z Thu Jan 1 00:00:00 1970 From: srinath@mistralsolutions.com Subject: [Patch v5] OMAP: AM3517/05: Add craneboard support Date: Tue, 9 Nov 2010 19:43:52 +0530 Message-ID: <1289312032-16574-1-git-send-email-srinath@mistralsolutions.com> References: <[PATCH] OMAP: AM3517/05: Add craneboard support> Return-path: Received: from mail-yw0-f46.google.com ([209.85.213.46]:41343 "EHLO mail-yw0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751089Ab0KIOc3 (ORCPT ); Tue, 9 Nov 2010 09:32:29 -0500 In-Reply-To: <[PATCH] OMAP: AM3517/05: Add craneboard support> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org Cc: jdk@ti.com, tony@atomide.com, linux-kernel@vger.kernel.org, linux@arm.linux.org.uk, linux-arm-kernel@lists.infradead.org, khilman@deeprootsystems.com, nm@ti.com, nagendra@mistralsolutions.com, umeshk@mistralsolutions.com, Srinath From: Srinath Craneboard is a hardware development platform based on the Sitara AM3517 ARM Cortex - A8 microprocessor device. This is a low cost reference design. This patch adds basic board file. Detailed support will follow in subsequent patches. [1] http://www.ti.com/arm [2] http://www.mistralsolutions.com/products/craneboard.php Signed-off-by: Srinath --- arch/arm/mach-omap2/Kconfig | 5 ++ arch/arm/mach-omap2/Makefile | 2 + arch/arm/mach-omap2/board-am3517crane.c | 69 ++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/uncompress.h | 1 + 4 files changed, 77 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-omap2/board-am3517crane.c diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index ab784bf..3688515 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -174,6 +174,11 @@ config MACH_OMAP3517EVM default y select OMAP_PACKAGE_CBB +config MACH_CRANEBOARD + bool "AM3517/05 CRANE board" + depends on ARCH_OMAP3 + select OMAP_PACKAGE_CBB + config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b0810b9..d43bd33 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -174,6 +174,8 @@ obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \ obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o +obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o + obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \ hsmmc.o # Platform specific device init code diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c new file mode 100644 index 0000000..13ead33 --- /dev/null +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -0,0 +1,69 @@ +/* + * Support for AM3517/05 Craneboard + * http://www.mistralsolutions.com/products/craneboard.php + * + * Copyright (C) 2010 Mistral Solutions Pvt Ltd. + * Author: R.Srinath + * + * Based on mach-omap2/board-am3517evm.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include "mux.h" + +/* Board initialization */ +static struct omap_board_config_kernel am3517_crane_config[] __initdata = { +}; + +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + +static void __init am3517_crane_init_irq(void) +{ + omap_board_config = am3517_crane_config; + omap_board_config_size = ARRAY_SIZE(am3517_crane_config); + + omap2_init_common_hw(NULL, NULL); + omap_init_irq(); + omap_gpio_init(); +} + +static void __init am3517_crane_init(void) +{ + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_serial_init(); +} + +MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") + .boot_params = 0x80000100, + .map_io = omap3_map_io, + .reserve = omap_reserve, + .init_irq = am3517_crane_init_irq, + .init_machine = am3517_crane_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 9036e37..229fbf2 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -145,6 +145,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* omap3 based boards using UART3 */ DEBUG_LL_OMAP3(3, cm_t35); DEBUG_LL_OMAP3(3, cm_t3517); + DEBUG_LL_OMAP3(3, craneboard); DEBUG_LL_OMAP3(3, igep0020); DEBUG_LL_OMAP3(3, igep0030); DEBUG_LL_OMAP3(3, nokia_rx51); -- 1.7.1.226.g770c5