[PATCH v6 0/7] OMAP: DSS2: Overlay Manager LCD2 support in DISPC

[Archit Taneja <archit@ti.com>]

This patch series which incorporates changes in DSS2 to enable
omap_dss_device instances to use the new Overlay Manager LCD2 in
DISPC.

On OMAP4, we have a new DISPC channel for Overlay Manager LCD2. This
channel's video port is a source port for RFBI, DSI2 and DPI. The
Primary channel's video port is connected to RFBI and DSI1.

There is a set of regsiters for LCD2 channel similar to the existing
LCD channel, like DISPC_CONTROL2, DISPC_DIVISOR2, DISPC_CONFIG2 and so
on.

In order to decide which LCD Overlay Manager to configure(LCD/LCD2),
there is a need for the omap_dss_device instances to tell the interface
drivers(DSI, DPI, RFBI etc) which LCD channel they want to connect to, so
that the corresponding registers get configured. Therefore, a new
enum omap_channel member is introduced to omap_dss_device.

This design was made keeping in mind the possible addition of more
Overlay Managers in future OMAPs, this code is also backward compatible
with OMAP3 as omap_dss_device instances in OMAP3 will stick only with
OMAP_DSS_CHANNEL_LCD.

Archit Taneja (2):
  OMAP: DSS2: Add dss_features for omap4 and overlay manager related
    features
  OMAP: DSS2: Use dss_features to handle DISPC bits removed on OMAP4

Sumit Semwal (5):
  OMAP: DSS2: Represent DISPC register defines with channel as
    parameter
  OMAP: DSS2: Introduce omap_channel argument to DISPC functions used
    by interface drivers
  OMAP: DSS2: Change remaining DISPC functions for new omap_channel
    argument
  OMAP: DSS2: LCD2 Channel Changes for DISPC
  OMAP: DSS2: Introduce omap_channel as an omap_dss_device parameter,
    add new overlay manager.

 arch/arm/plat-omap/include/plat/display.h |    8 +
 drivers/video/omap2/dss/dispc.c           |  558 ++++++++++++++++++++---------
 drivers/video/omap2/dss/dpi.c             |   40 ++-
 drivers/video/omap2/dss/dsi.c             |   25 +-
 drivers/video/omap2/dss/dss.h             |   36 ++-
 drivers/video/omap2/dss/dss_features.c    |   43 +++-
 drivers/video/omap2/dss/dss_features.h    |    7 +-
 drivers/video/omap2/dss/manager.c         |   77 +++--
 drivers/video/omap2/dss/overlay.c         |   14 +-
 drivers/video/omap2/dss/rfbi.c            |   20 +-
 drivers/video/omap2/dss/sdi.c             |   24 +-
 11 files changed, 586 insertions(+), 266 deletions(-)
--
 Version 6:
- Improve git commit messages
- Move addition of omap_channel member in omap_dss_device in the patch which
  brings the change in dss_recheck_connections().
 Version 5:
- Replaced dssdev->channel with dssdev->manager->id in interface driver
  calls, dssdev->channel is only used once in dss_recheck_connections()
  to set up the connection between panel device and dispc managers
- DISPC_CONTROL and DISPC_CONFIG registers are not defined with channel
  as a parameter.
 Version 4:
- Broken into smaller patches in order to build in between patches.
- Some basic cleanup
 Version 3:
- Patches are reworked over dss2 features framework. Number of patches
  are reduced.
  Version 2:
- The DISPC_BASE macro now isn't changed for OMAP4, a future
  hwmod patch will take care of this dynamically.
- Supported_displays member of manager is now assigned correctly
  for OMAP2.
- DISPC Registers common to LCD and LCD2 channels are not defined
  separately, now there is a parameter which differentiates between
  the 2 channels.
- Secondary LCD manager is now named as lcd2 instead of 2lcd, the
  patch given in the link below allows DSS2 interpret this correctly.
  Version 1:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg31458.html