From: Nishanth Menon <nm@ti.com>
To: linux-omap <linux-omap@vger.kernel.org>,
linux-arm <linux-arm-kernel@lists.infradead.org>
Cc: Jean Pihet <jean.pihet@newoldbits.com>,
Kevin <khilman@deeprootsystems.com>, Tony <tony@atomide.com>,
Santosh <santosh.shilimkar@ti.com>
Subject: [PATCH v5 3/7] OMAP3: pm: introduce errata handling
Date: Mon, 20 Dec 2010 14:05:05 -0600 [thread overview]
Message-ID: <1292875509-9896-4-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1292875509-9896-1-git-send-email-nm@ti.com>
Introduce errata handling for OMAP3. This patch introduces
errata variable and stub for initialization which will be
filled up by follow-on patches.
Signed-off-by: Nishanth Menon <nm@ti.com>
---
v2: Minor commit message typo corrections
v1: Splitting the errata introduction out into it's own separate patch
arch/arm/mach-omap2/pm.h | 7 +++++++
arch/arm/mach-omap2/pm34xx.c | 9 +++++++++
2 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 0d75bfd..0348fd7 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -85,4 +85,11 @@ extern unsigned int save_secure_ram_context_sz;
extern unsigned int omap24xx_cpu_suspend_sz;
extern unsigned int omap34xx_cpu_suspend_sz;
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
+extern u16 pm34xx_errata;
+#define IS_PM34XX_ERRATUM(id) (pm34xx_errata & (id))
+#else
+#define IS_PM34XX_ERRATUM(id) 0
+#endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
+
#endif
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 648b8c5..5702f41 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -68,6 +68,9 @@ static inline bool is_suspending(void)
#define OMAP343X_TABLE_VALUE_OFFSET 0xc0
#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0xc8
+/* pm34xx errata defined in pm.h */
+u16 pm34xx_errata;
+
struct power_state {
struct powerdomain *pwrdm;
u32 next_state;
@@ -1002,6 +1005,10 @@ void omap_push_sram_idle(void)
save_secure_ram_context_sz);
}
+static void __init pm_errata_configure(void)
+{
+}
+
static int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
@@ -1011,6 +1018,8 @@ static int __init omap3_pm_init(void)
if (!cpu_is_omap34xx())
return -ENODEV;
+ pm_errata_configure();
+
printk(KERN_ERR "Power Management for TI OMAP3.\n");
/* XXX prcm_setup_regs needs to be before enabling hw
--
1.6.3.3
next prev parent reply other threads:[~2010-12-20 20:05 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-20 20:05 [PATCH v5 0/7] OMAP: idle path errata fixes Nishanth Menon
2010-12-20 20:05 ` [PATCH v5 1/7] OMAP3: PM: Update clean_l2 to use v7_flush_dcache_all Nishanth Menon
2010-12-20 20:05 ` [PATCH v5 2/7] OMAP3: PM: Erratum i581 support: dll kick strategy Nishanth Menon
2010-12-20 20:05 ` Nishanth Menon [this message]
2010-12-20 20:05 ` [PATCH v5 4/7] OMAP3630: PM: Erratum i608: disable RTA Nishanth Menon
2010-12-20 20:05 ` [PATCH v5 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache Nishanth Menon
2010-12-20 20:05 ` [PATCH v5 6/7] OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_mode Nishanth Menon
2010-12-20 23:41 ` Kevin Hilman
2010-12-21 0:44 ` Kevin Hilman
2010-12-21 2:11 ` Nishanth Menon
2010-12-20 20:05 ` [PATCH v5 7/7] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2 Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1292875509-9896-4-git-send-email-nm@ti.com \
--to=nm@ti.com \
--cc=jean.pihet@newoldbits.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=santosh.shilimkar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox