From: Sumit Semwal <sumit.semwal@ti.com>
To: tomi.valkeinen@nokia.com, paul@pwsan.com,
khilman@deeprootsystems.com, hvaibhav@ti.com,
linux-omap@vger.kernel.org
Cc: Senthilvadivu Guruswamy <svadivu@ti.com>,
Sumit Semwal <sumit.semwal@ti.com>
Subject: [PATCH v6 06/18] OMAP2,3 DSS2 Use Regulator init with driver name
Date: Sat, 15 Jan 2011 00:21:39 +0530 [thread overview]
Message-ID: <1295031111-32229-7-git-send-email-sumit.semwal@ti.com> (raw)
In-Reply-To: <1295031111-32229-1-git-send-email-sumit.semwal@ti.com>
From: Senthilvadivu Guruswamy <svadivu@ti.com>
Use driver name in regulator inits needed for display instead of using device
structure name.
Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
---
arch/arm/mach-omap2/board-3430sdp.c | 11 +++--------
arch/arm/mach-omap2/board-cm-t35.c | 12 ++++--------
arch/arm/mach-omap2/board-igep0020.c | 6 ++----
arch/arm/mach-omap2/board-omap3evm.c | 6 ++----
arch/arm/mach-omap2/board-omap3stalker.c | 12 ++++--------
5 files changed, 15 insertions(+), 32 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 6f4e7cf..d99902c 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -315,10 +315,8 @@ static struct platform_device sdp3430_dss_device = {
},
};
-static struct regulator_consumer_supply sdp3430_vdda_dac_supply = {
- .supply = "vdda_dac",
- .dev = &sdp3430_dss_device.dev,
-};
+static struct regulator_consumer_supply sdp3430_vdda_dac_supply =
+ REGULATOR_SUPPLY("vdda_dac", "omap_display");
static struct platform_device *sdp3430_devices[] __initdata = {
&sdp3430_dss_device,
@@ -546,10 +544,7 @@ static struct regulator_init_data sdp3430_vdac = {
/* VPLL2 for digital video outputs */
static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
- {
- .supply = "vdds_dsi",
- .dev = &sdp3430_dss_device.dev,
- }
+ REGULATOR_SUPPLY("vdds_dsi", "omap_display"),
};
static struct regulator_init_data sdp3430_vpll2 = {
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 79f87ec..22322d1 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -495,15 +495,11 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = {
.supply = "vmmc_aux",
};
-static struct regulator_consumer_supply cm_t35_vdac_supply = {
- .supply = "vdda_dac",
- .dev = &cm_t35_dss_device.dev,
-};
+static struct regulator_consumer_supply cm_t35_vdac_supply =
+ REGULATOR_SUPPLY("vdda_dac", "omap_display");
-static struct regulator_consumer_supply cm_t35_vdvi_supply = {
- .supply = "vdvi",
- .dev = &cm_t35_dss_device.dev,
-};
+static struct regulator_consumer_supply cm_t35_vdvi_supply =
+ REGULATOR_SUPPLY("vdvi", "omap_display");
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data cm_t35_vmmc1 = {
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 23abfa3..238c69e 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -493,10 +493,8 @@ static struct platform_device igep2_dss_device = {
},
};
-static struct regulator_consumer_supply igep2_vpll2_supply = {
- .supply = "vdds_dsi",
- .dev = &igep2_dss_device.dev,
-};
+static struct regulator_consumer_supply igep2_vpll2_supply =
+ REGULATOR_SUPPLY("vdds_dsi", "omap_display");
static struct regulator_init_data igep2_vpll2 = {
.constraints = {
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 4ad3c4d..32ac816 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -500,10 +500,8 @@ static struct twl4030_codec_data omap3evm_codec_data = {
.audio = &omap3evm_audio_data,
};
-static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = {
- .supply = "vdda_dac",
- .dev = &omap3_evm_dss_device.dev,
-};
+static struct regulator_consumer_supply omap3_evm_vdda_dac_supply =
+ REGULATOR_SUPPLY("vdda_dac", "omap_display");
/* VDAC for DSS driving S-Video */
static struct regulator_init_data omap3_evm_vdac = {
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 51c010c..7b675cb 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -448,10 +448,8 @@ static struct twl4030_codec_data omap3stalker_codec_data = {
.audio = &omap3stalker_audio_data,
};
-static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = {
- .supply = "vdda_dac",
- .dev = &omap3_stalker_dss_device.dev,
-};
+static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply =
+ REGULATOR_SUPPLY("vdda_dac", "omap_display");
/* VDAC for DSS driving S-Video */
static struct regulator_init_data omap3_stalker_vdac = {
@@ -469,10 +467,8 @@ static struct regulator_init_data omap3_stalker_vdac = {
};
/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_stalker_vpll2_supply = {
- .supply = "vdds_dsi",
- .dev = &omap3_stalker_lcd_device.dev,
-};
+static struct regulator_consumer_supply omap3_stalker_vpll2_supply =
+ REGULATOR_SUPPLY("vdds_dsi", "omap_display");
static struct regulator_init_data omap3_stalker_vpll2 = {
.constraints = {
--
1.7.0.4
next prev parent reply other threads:[~2011-01-14 18:52 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-14 18:51 [PATCH v6 00/18] OMAP2,3: hwmod DSS Adaptation Sumit Semwal
2011-01-14 18:51 ` [PATCH v6 01/18] OMAP2,3: DSS2: remove forced clk-disable from omap_dss_remove Sumit Semwal
2011-01-14 18:51 ` [PATCH v6 02/18] OMAP2420: hwmod data: add DSS DISPC RFBI VENC Sumit Semwal
2011-01-14 18:51 ` [PATCH v6 03/18] OMAP2430: " Sumit Semwal
2011-01-14 18:51 ` [PATCH v6 04/18] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC Sumit Semwal
2011-01-14 18:51 ` [PATCH v6 05/18] OMAP2,3 DSS2 Change driver name to omap_display Sumit Semwal
2011-01-14 18:51 ` Sumit Semwal [this message]
2011-01-14 18:51 ` [PATCH v6 07/18] OMAP2,3: DSS2: Create new file display.c for central dss driver registration Sumit Semwal
2011-01-14 18:51 ` [PATCH v6 08/18] OMAP2,3: DSS2: board files: replace platform_device_register with omap_display_init() Sumit Semwal
2011-01-14 18:51 ` [PATCH v6 09/18] OMAP2,3: DSS2: Build omap_device for each DSS HWIP Sumit Semwal
2011-01-14 18:51 ` [PATCH v6 10/18] OMAP2,3: DSS2: DSS: create platform_driver, move init,exit to driver Sumit Semwal
2011-01-14 18:51 ` [PATCH v6 11/18] OMAP2,3: DSS2: Move clocks from core driver to dss driver Sumit Semwal
2011-01-14 18:51 ` [PATCH v6 12/18] OMAP2,3: DSS2: RFBI: create platform_driver, move init,exit to driver Sumit Semwal
2011-01-14 18:51 ` [PATCH v6 13/18] OMAP2,3: DSS2: DISPC: " Sumit Semwal
2011-01-14 18:51 ` [PATCH v6 14/18] OMAP2,3: DSS2: VENC: " Sumit Semwal
2011-01-14 18:51 ` [PATCH v6 15/18] OMAP2,3: DSS2: DSI: " Sumit Semwal
2011-01-14 18:51 ` [PATCH v6 16/18] OMAP2,3: DSS2: replace printk with dev_dbg in init Sumit Semwal
2011-01-14 18:51 ` [PATCH v6 17/18] OMAP2,3: DSS2: Use platform device to get baseaddr Sumit Semwal
2011-01-14 18:51 ` [PATCH v6 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device Sumit Semwal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295031111-32229-7-git-send-email-sumit.semwal@ti.com \
--to=sumit.semwal@ti.com \
--cc=hvaibhav@ti.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=svadivu@ti.com \
--cc=tomi.valkeinen@nokia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox