From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Weber Subject: [PATCHv4 0/4] omap3: Devkit8000: misc fixes Date: Wed, 19 Jan 2011 09:19:22 +0100 Message-ID: <1295425166-25540-1-git-send-email-weber@corscience.de> Return-path: Received: from moutng.kundenserver.de ([212.227.17.8]:56697 "EHLO moutng.kundenserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753659Ab1ASITl (ORCPT ); Wed, 19 Jan 2011 03:19:41 -0500 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org Cc: Thomas Weber , Tony Lindgren , Russell King , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Daniel Morsing , charu@ti.com, sshtylyov@mvista.com Here is a set of misc fixes for the devkit8000. The only really notable one is the lcd enable gpio fix. It gets rid of some nasty low level twl4030 calls and replaces them with generic gpio calls. It also fixes a bug where the screen would not turn off when blanking. Changes from v1: Pull the indention fix into "Change lcd power pin". Change the pin for lcd pwren. Fix the pullup/pulldown configuration after lcd prwen correction. Changes from v2: Better comment for removing low level functions used for twl4030 gpio Fix indention => indentation in comment Changed from v3: Use return value of gpio_request. Fix indentation of one curly brace. Daniel Morsing (1): OMAP3: Devkit8000: Fix tps65930 pullup/pulldown configuration Thomas Weber (3): OMAP3: Devkit8000: Change lcd power pin OMAP3: Devkit8000: Check return value of gpio_request OMAP3: Devkit8000: Fix indentation arch/arm/mach-omap2/board-devkit8000.c | 28 ++++++++++++++++++---------- 1 files changed, 18 insertions(+), 10 deletions(-) -- 1.7.4.rc2