[PATCH 2/2] omap3: devkit8000: Add and use 4.3 inch display

[Daniel Morsing <daniel.morsing@gmail.com>]

This patch adds a generic panel entry for the 4.3 inch display that is
sold with the devkit8000 and modifies the board file to use this
display.

Signed-off-by: Daniel Morsing <daniel.morsing@gmail.com>
---
Note that this patch depends on the previous one in the series.

 arch/arm/mach-omap2/board-devkit8000.c           |    2 +-
 drivers/video/omap2/displays/panel-generic-dpi.c |   26 ++++++++++++++++++++++
 2 files changed, 27 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 9a2a31e..6dab13e 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -148,7 +148,7 @@ static struct regulator_consumer_supply devkit8000_vio_supply =
 	REGULATOR_SUPPLY("vcc", "spi2.0");
 
 static struct panel_generic_dpi_data lcd_panel = {
-	.name			= "generic",
+	.name			= "devkit_43",
 	.platform_enable        = devkit8000_panel_enable_lcd,
 	.platform_disable       = devkit8000_panel_disable_lcd,
 };
diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
index b52a28f..ee9e7ea 100644
--- a/drivers/video/omap2/displays/panel-generic-dpi.c
+++ b/drivers/video/omap2/displays/panel-generic-dpi.c
@@ -83,6 +83,32 @@ static struct panel_config generic_dpi_panels[] = {
 		.name			= "generic",
 	},
 
+	/* Devkit8000 4.3 Inch display */
+	{
+		{
+			.x_res		= 480,
+			.y_res		= 272,
+
+			.pixel_clock	= 10000,
+
+			.hfp		= 2,
+			.hsw		= 41,
+			.hbp		= 2,
+
+			.vfp		= 2,
+			.vsw		= 10,
+			.vbp		= 2,
+		},
+		.acbi			= 0x0,
+		.acb			= 0x0,
+		.recommended_bpp	= 16,
+		.config			= OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+						OMAP_DSS_LCD_IHS,
+		.power_on_delay		= 50,
+		.power_off_delay	= 100,
+		.name			= "devkit_43",
+	},
+
 	/* Sharp LQ043T1DG01 */
 	{
 		{
-- 
1.7.4