public inbox for linux-omap@vger.kernel.org
 help / color / mirror / Atom feed
From: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
To: Greg KH <greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
Cc: Linux USB Mailing List
	<linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Linux OMAP Mailing List
	<linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Hema HK <hemahk-l0cyMroinI0@public.gmane.org>,
	Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
	Paul Walmsley <paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org>,
	Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
Subject: [patch-v2.6.39 10/12] usb: otg: TWL6030 Save the last event in otg_transceiver
Date: Thu, 17 Feb 2011 14:38:47 +0200	[thread overview]
Message-ID: <1297946329-9353-11-git-send-email-balbi@ti.com> (raw)
In-Reply-To: <1297946329-9353-1-git-send-email-balbi-l0cyMroinI0@public.gmane.org>

From: Hema HK <hemahk-l0cyMroinI0@public.gmane.org>

Save the last event in the otg_transceiver so that it can used in the
musb driver and gadget driver to configure the musb and enable the
vbus for host mode and OTG mode, if the device is connected during boot.

Signed-off-by: Hema HK <hemahk-l0cyMroinI0@public.gmane.org>
Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Cc: Paul Walmsley <paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
---
 drivers/usb/otg/twl6030-usb.c |    3 +++
 include/linux/usb/otg.h       |    1 +
 2 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index b4eda02..05f17b7 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -262,11 +262,13 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
 			twl->otg.default_a = false;
 			twl->otg.state = OTG_STATE_B_IDLE;
 			twl->linkstat = status;
+			twl->otg.last_event = status;
 			blocking_notifier_call_chain(&twl->otg.notifier,
 						status, twl->otg.gadget);
 		} else {
 			status = USB_EVENT_NONE;
 			twl->linkstat = status;
+			twl->otg.last_event = status;
 			blocking_notifier_call_chain(&twl->otg.notifier,
 						status, twl->otg.gadget);
 			if (twl->asleep) {
@@ -299,6 +301,7 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 		twl->otg.default_a = true;
 		twl->otg.state = OTG_STATE_A_IDLE;
 		twl->linkstat = status;
+		twl->otg.last_event = status;
 		blocking_notifier_call_chain(&twl->otg.notifier, status,
 							twl->otg.gadget);
 	} else  {
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index a1a1e7a..da511ee 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -66,6 +66,7 @@ struct otg_transceiver {
 
 	u8			default_a;
 	enum usb_otg_state	state;
+	enum usb_xceiv_events	last_event;
 
 	struct usb_bus		*host;
 	struct usb_gadget	*gadget;
-- 
1.7.4.rc2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2011-02-17 12:38 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-17 12:38 [patch-v2.6.39 00/12] OMAP USB and MUSB patches for Next Felipe Balbi
     [not found] ` <1297946329-9353-1-git-send-email-balbi-l0cyMroinI0@public.gmane.org>
2011-02-17 12:38   ` [patch-v2.6.39 01/12] usb: musb: do not error out if Kconfig doesn't match board mode Felipe Balbi
2011-02-17 12:38   ` [patch-v2.6.39 05/12] usb: otg: enable regulator only on cable/device connect Felipe Balbi
2011-02-17 12:38   ` [patch-v2.6.39 08/12] usb: otg: OMAP4430: Introducing suspend function for power management Felipe Balbi
     [not found]     ` <1297946329-9353-9-git-send-email-balbi-l0cyMroinI0@public.gmane.org>
2011-02-17 19:13       ` Felipe Balbi
2011-02-18  7:48         ` Felipe Balbi
     [not found]           ` <20110218074857.GY14574-UiBtZHVXSwEVvW8u9ZQWYwjfymiNCTlR@public.gmane.org>
2011-02-24 21:32             ` Tony Lindgren
2011-02-24 21:31       ` Tony Lindgren
2011-02-17 12:38   ` [patch-v2.6.39 09/12] usb: otg: TWL6030: Introduce the twl6030_phy_suspend function Felipe Balbi
2011-02-17 12:38   ` Felipe Balbi [this message]
2011-02-17 12:38   ` [patch-v2.6.39 12/12] usb: otg: notifier: switch to atomic notifier Felipe Balbi
2011-02-25 10:46     ` Heikki Krogerus
2011-02-25 10:50       ` Heikki Krogerus
2011-02-25 10:53         ` Felipe Balbi
     [not found]           ` <20110225105317.GE4190-UiBtZHVXSwEVvW8u9ZQWYwjfymiNCTlR@public.gmane.org>
2011-02-25 11:07             ` Heikki Krogerus
2011-02-25 11:24               ` Felipe Balbi
2011-02-25 11:32                 ` Heikki Krogerus
2011-02-17 12:38 ` [patch-v2.6.39 02/12] usb: musb: gadget: beautify usb_gadget_probe_driver()/usb_gadget_unregister_driver Felipe Balbi
2011-02-17 12:38 ` [patch-v2.6.39 03/12] usb: musb: gadget: do not poke with gadget's list_head Felipe Balbi
2011-02-25 19:41   ` Pavol Kurina
2011-02-28  8:43     ` Felipe Balbi
2011-03-01 15:36       ` Pavol Kurina
2011-03-01 15:39         ` Felipe Balbi
2011-03-01 15:40           ` Felipe Balbi
2011-03-01 15:44             ` Felipe Balbi
2011-02-17 12:38 ` [patch-v2.6.39 04/12] usb: musb: Using runtime pm APIs for musb Felipe Balbi
2011-02-17 12:38 ` [patch-v2.6.39 06/12] usb: otg: Remove one unnecessary I2C read request Felipe Balbi
2011-02-17 12:38 ` [patch-v2.6.39 07/12] usb: otg: OMAP4430: Add phy_suspend function pointer to twl4030_usb_data Felipe Balbi
2011-02-17 12:38 ` [patch-v2.6.39 11/12] usb: musb: OMAP4430: Fix usb device detection if connected during boot Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1297946329-9353-11-git-send-email-balbi@ti.com \
    --to=balbi-l0cymroini0@public.gmane.org \
    --cc=greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org \
    --cc=hemahk-l0cyMroinI0@public.gmane.org \
    --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org \
    --cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox