public inbox for linux-omap@vger.kernel.org
 help / color / mirror / Atom feed
From: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
To: Greg KH <greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
Cc: Linux USB Mailing List
	<linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Linux OMAP Mailing List
	<linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Hema HK <hemahk-l0cyMroinI0@public.gmane.org>,
	Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
	Paul Walmsley <paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org>,
	Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
Subject: [patch-v2.6.39 05/12] usb: otg: enable regulator only on cable/device connect
Date: Thu, 17 Feb 2011 14:38:42 +0200	[thread overview]
Message-ID: <1297946329-9353-6-git-send-email-balbi@ti.com> (raw)
In-Reply-To: <1297946329-9353-1-git-send-email-balbi-l0cyMroinI0@public.gmane.org>

From: Hema HK <hemahk-l0cyMroinI0@public.gmane.org>

Remove the regulator enable while driver loading and enable it only when
the cable/device is connected and disable it when disconnected.

Remove the configuration of config_state and config_trans register
configuration as these registers are programmed when regulator
enable/disable is called.

Signed-off-by: Hema HK <hemahk-l0cyMroinI0@public.gmane.org>
Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Cc: Paul Walmsley <paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
---
 drivers/usb/otg/twl6030-usb.c |   27 ++++++++++++---------------
 1 files changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index 28f7701..eca4591 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -158,8 +158,6 @@ static int twl6030_phy_init(struct otg_transceiver *x)
 	dev  = twl->dev;
 	pdata = dev->platform_data;
 
-	regulator_enable(twl->usb3v3);
-
 	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
 
 	if (hw_state & STS_USB_ID)
@@ -180,7 +178,6 @@ static void twl6030_phy_shutdown(struct otg_transceiver *x)
 	dev  = twl->dev;
 	pdata = dev->platform_data;
 	pdata->phy_power(twl->dev, 0, 0);
-	regulator_disable(twl->usb3v3);
 }
 
 static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
@@ -199,16 +196,6 @@ static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
 	if (IS_ERR(twl->usb3v3))
 		return -ENODEV;
 
-	regulator_enable(twl->usb3v3);
-
-	/* Program the VUSB_CFG_TRANS for ACTIVE state. */
-	twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0x3F,
-						VUSB_CFG_TRANS);
-
-	/* Program the VUSB_CFG_STATE register to ON on all groups. */
-	twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0xE1,
-						VUSB_CFG_STATE);
-
 	/* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
 	twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);
 
@@ -261,16 +248,23 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
 						CONTROLLER_STAT1);
 	if (!(hw_state & STS_USB_ID)) {
 		if (vbus_state & VBUS_DET) {
+			regulator_enable(twl->usb3v3);
+			twl->asleep = 1;
 			status = USB_EVENT_VBUS;
 			twl->otg.default_a = false;
 			twl->otg.state = OTG_STATE_B_IDLE;
+			twl->linkstat = status;
+			blocking_notifier_call_chain(&twl->otg.notifier,
+						status, twl->otg.gadget);
 		} else {
 			status = USB_EVENT_NONE;
-		}
-		if (status >= 0) {
 			twl->linkstat = status;
 			blocking_notifier_call_chain(&twl->otg.notifier,
 						status, twl->otg.gadget);
+			if (twl->asleep) {
+				regulator_disable(twl->usb3v3);
+				twl->asleep = 0;
+			}
 		}
 	}
 	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
@@ -288,6 +282,8 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 
 	if (hw_state & STS_USB_ID) {
 
+		regulator_enable(twl->usb3v3);
+		twl->asleep = 1;
 		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1);
 		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
 								0x10);
@@ -437,6 +433,7 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
 		return status;
 	}
 
+	twl->asleep = 0;
 	pdata->phy_init(dev);
 	twl6030_enable_irq(&twl->otg);
 	dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
-- 
1.7.4.rc2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2011-02-17 12:38 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-17 12:38 [patch-v2.6.39 00/12] OMAP USB and MUSB patches for Next Felipe Balbi
2011-02-17 12:38 ` [patch-v2.6.39 02/12] usb: musb: gadget: beautify usb_gadget_probe_driver()/usb_gadget_unregister_driver Felipe Balbi
2011-02-17 12:38 ` [patch-v2.6.39 03/12] usb: musb: gadget: do not poke with gadget's list_head Felipe Balbi
2011-02-25 19:41   ` Pavol Kurina
2011-02-28  8:43     ` Felipe Balbi
2011-03-01 15:36       ` Pavol Kurina
2011-03-01 15:39         ` Felipe Balbi
2011-03-01 15:40           ` Felipe Balbi
2011-03-01 15:44             ` Felipe Balbi
2011-02-17 12:38 ` [patch-v2.6.39 04/12] usb: musb: Using runtime pm APIs for musb Felipe Balbi
2011-02-17 12:38 ` [patch-v2.6.39 06/12] usb: otg: Remove one unnecessary I2C read request Felipe Balbi
2011-02-17 12:38 ` [patch-v2.6.39 07/12] usb: otg: OMAP4430: Add phy_suspend function pointer to twl4030_usb_data Felipe Balbi
     [not found] ` <1297946329-9353-1-git-send-email-balbi-l0cyMroinI0@public.gmane.org>
2011-02-17 12:38   ` [patch-v2.6.39 01/12] usb: musb: do not error out if Kconfig doesn't match board mode Felipe Balbi
2011-02-17 12:38   ` Felipe Balbi [this message]
2011-02-17 12:38   ` [patch-v2.6.39 08/12] usb: otg: OMAP4430: Introducing suspend function for power management Felipe Balbi
     [not found]     ` <1297946329-9353-9-git-send-email-balbi-l0cyMroinI0@public.gmane.org>
2011-02-17 19:13       ` Felipe Balbi
2011-02-18  7:48         ` Felipe Balbi
     [not found]           ` <20110218074857.GY14574-UiBtZHVXSwEVvW8u9ZQWYwjfymiNCTlR@public.gmane.org>
2011-02-24 21:32             ` Tony Lindgren
2011-02-24 21:31       ` Tony Lindgren
2011-02-17 12:38   ` [patch-v2.6.39 09/12] usb: otg: TWL6030: Introduce the twl6030_phy_suspend function Felipe Balbi
2011-02-17 12:38   ` [patch-v2.6.39 10/12] usb: otg: TWL6030 Save the last event in otg_transceiver Felipe Balbi
2011-02-17 12:38   ` [patch-v2.6.39 12/12] usb: otg: notifier: switch to atomic notifier Felipe Balbi
2011-02-25 10:46     ` Heikki Krogerus
2011-02-25 10:50       ` Heikki Krogerus
2011-02-25 10:53         ` Felipe Balbi
     [not found]           ` <20110225105317.GE4190-UiBtZHVXSwEVvW8u9ZQWYwjfymiNCTlR@public.gmane.org>
2011-02-25 11:07             ` Heikki Krogerus
2011-02-25 11:24               ` Felipe Balbi
2011-02-25 11:32                 ` Heikki Krogerus
2011-02-17 12:38 ` [patch-v2.6.39 11/12] usb: musb: OMAP4430: Fix usb device detection if connected during boot Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1297946329-9353-6-git-send-email-balbi@ti.com \
    --to=balbi-l0cymroini0@public.gmane.org \
    --cc=greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org \
    --cc=hemahk-l0cyMroinI0@public.gmane.org \
    --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org \
    --cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox