From: Felipe Balbi <balbi@ti.com>
To: Greg KH <greg@kroah.com>
Cc: Linux USB Mailing List <linux-usb@vger.kernel.org>,
Linux OMAP Mailing List <linux-omap@vger.kernel.org>,
Hema HK <hemahk@ti.com>, Tony Lindgren <tony@atomide.com>,
Paul Walmsley <paul@pwsan.com>, Felipe Balbi <balbi@ti.com>
Subject: [patch-v2.6.39 06/12] usb: otg: Remove one unnecessary I2C read request.
Date: Thu, 17 Feb 2011 14:38:43 +0200 [thread overview]
Message-ID: <1297946329-9353-7-git-send-email-balbi@ti.com> (raw)
In-Reply-To: <1297946329-9353-1-git-send-email-balbi@ti.com>
From: Hema HK <hemahk@ti.com>
To get the ID status there was an I2C read transfer. Removed this I2C
read transfer as this info can be used from existing variable(linkstat).
Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
drivers/usb/otg/twl6030-usb.c | 7 ++-----
1 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index eca4591..88989e6 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -149,7 +149,6 @@ static int twl6030_set_phy_clk(struct otg_transceiver *x, int on)
static int twl6030_phy_init(struct otg_transceiver *x)
{
- u8 hw_state;
struct twl6030_usb *twl;
struct device *dev;
struct twl4030_usb_data *pdata;
@@ -158,9 +157,7 @@ static int twl6030_phy_init(struct otg_transceiver *x)
dev = twl->dev;
pdata = dev->platform_data;
- hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
-
- if (hw_state & STS_USB_ID)
+ if (twl->linkstat == USB_EVENT_ID)
pdata->phy_power(twl->dev, 1, 1);
else
pdata->phy_power(twl->dev, 0, 1);
@@ -290,6 +287,7 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
status = USB_EVENT_ID;
twl->otg.default_a = true;
twl->otg.state = OTG_STATE_A_IDLE;
+ twl->linkstat = status;
blocking_notifier_call_chain(&twl->otg.notifier, status,
twl->otg.gadget);
} else {
@@ -299,7 +297,6 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
0x1);
}
twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status);
- twl->linkstat = status;
return IRQ_HANDLED;
}
--
1.7.4.rc2
next prev parent reply other threads:[~2011-02-17 12:39 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-17 12:38 [patch-v2.6.39 00/12] OMAP USB and MUSB patches for Next Felipe Balbi
2011-02-17 12:38 ` [patch-v2.6.39 02/12] usb: musb: gadget: beautify usb_gadget_probe_driver()/usb_gadget_unregister_driver Felipe Balbi
2011-02-17 12:38 ` [patch-v2.6.39 03/12] usb: musb: gadget: do not poke with gadget's list_head Felipe Balbi
2011-02-25 19:41 ` Pavol Kurina
2011-02-28 8:43 ` Felipe Balbi
2011-03-01 15:36 ` Pavol Kurina
2011-03-01 15:39 ` Felipe Balbi
2011-03-01 15:40 ` Felipe Balbi
2011-03-01 15:44 ` Felipe Balbi
2011-02-17 12:38 ` [patch-v2.6.39 04/12] usb: musb: Using runtime pm APIs for musb Felipe Balbi
2011-02-17 12:38 ` Felipe Balbi [this message]
2011-02-17 12:38 ` [patch-v2.6.39 07/12] usb: otg: OMAP4430: Add phy_suspend function pointer to twl4030_usb_data Felipe Balbi
[not found] ` <1297946329-9353-1-git-send-email-balbi-l0cyMroinI0@public.gmane.org>
2011-02-17 12:38 ` [patch-v2.6.39 01/12] usb: musb: do not error out if Kconfig doesn't match board mode Felipe Balbi
2011-02-17 12:38 ` [patch-v2.6.39 05/12] usb: otg: enable regulator only on cable/device connect Felipe Balbi
2011-02-17 12:38 ` [patch-v2.6.39 08/12] usb: otg: OMAP4430: Introducing suspend function for power management Felipe Balbi
[not found] ` <1297946329-9353-9-git-send-email-balbi-l0cyMroinI0@public.gmane.org>
2011-02-17 19:13 ` Felipe Balbi
2011-02-18 7:48 ` Felipe Balbi
[not found] ` <20110218074857.GY14574-UiBtZHVXSwEVvW8u9ZQWYwjfymiNCTlR@public.gmane.org>
2011-02-24 21:32 ` Tony Lindgren
2011-02-24 21:31 ` Tony Lindgren
2011-02-17 12:38 ` [patch-v2.6.39 09/12] usb: otg: TWL6030: Introduce the twl6030_phy_suspend function Felipe Balbi
2011-02-17 12:38 ` [patch-v2.6.39 10/12] usb: otg: TWL6030 Save the last event in otg_transceiver Felipe Balbi
2011-02-17 12:38 ` [patch-v2.6.39 12/12] usb: otg: notifier: switch to atomic notifier Felipe Balbi
2011-02-25 10:46 ` Heikki Krogerus
2011-02-25 10:50 ` Heikki Krogerus
2011-02-25 10:53 ` Felipe Balbi
[not found] ` <20110225105317.GE4190-UiBtZHVXSwEVvW8u9ZQWYwjfymiNCTlR@public.gmane.org>
2011-02-25 11:07 ` Heikki Krogerus
2011-02-25 11:24 ` Felipe Balbi
2011-02-25 11:32 ` Heikki Krogerus
2011-02-17 12:38 ` [patch-v2.6.39 11/12] usb: musb: OMAP4430: Fix usb device detection if connected during boot Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1297946329-9353-7-git-send-email-balbi@ti.com \
--to=balbi@ti.com \
--cc=greg@kroah.com \
--cc=hemahk@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox