public inbox for linux-omap@vger.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: linux-omap@vger.kernel.org, khilman@ti.com, paul@pwsan.com,
	b-cousson@ti.com, tony@atomide.com,
	broonie@opensource.wolfsonmicro.com, jhnikula@gmail.com,
	peter.ujfalusi@nokia.com
Cc: p-basak2@ti.com, kishon@ti.com, charu@ti.com, shubhrajyoti@ti.com
Subject: [PATCH v3 04/13] OMAP2430: hwmod data: Add McBSP
Date: Fri, 18 Feb 2011 19:52:19 +0530	[thread overview]
Message-ID: <1298038948-19871-5-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1298038948-19871-1-git-send-email-kishon@ti.com>

From: Charulatha V <charu@ti.com>

Add McBSP hwmod data for OMAP2430.

Added a revision member inorder to facilitate the driver to
differentiate between mcbsp in different omap.

Signed-off-by: Charulatha V <charu@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_2430_data.c |  322 ++++++++++++++++++++++++++++
 arch/arm/plat-omap/include/plat/mcbsp.h    |    2 +
 2 files changed, 324 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 60fe4aa..757ec2c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -18,6 +18,7 @@
 #include <plat/serial.h>
 #include <plat/i2c.h>
 #include <plat/gpio.h>
+#include <plat/mcbsp.h>
 #include <plat/mcspi.h>
 
 #include "omap_hwmod_common_data.h"
@@ -92,6 +93,11 @@ static struct omap_hwmod omap2430_uart2_hwmod;
 static struct omap_hwmod omap2430_uart3_hwmod;
 static struct omap_hwmod omap2430_i2c1_hwmod;
 static struct omap_hwmod omap2430_i2c2_hwmod;
+static struct omap_hwmod omap2430_mcbsp1_hwmod;
+static struct omap_hwmod omap2430_mcbsp2_hwmod;
+static struct omap_hwmod omap2430_mcbsp3_hwmod;
+static struct omap_hwmod omap2430_mcbsp4_hwmod;
+static struct omap_hwmod omap2430_mcbsp5_hwmod;
 
 /* I2C IP block address space length (in bytes) */
 #define OMAP2_I2C_AS_LEN		128
@@ -1133,6 +1139,315 @@ static struct omap_hwmod omap2430_mcspi3_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
+/*
+ * 'mcbsp' class
+ * multi channel buffered serial port controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap2430_mcbsp_sysc = {
+	.rev_offs	= 0x007C,
+	.sysc_offs	= 0x008C,
+	.sysc_flags	= (SYSC_HAS_SOFTRESET),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2430_mcbsp_hwmod_class = {
+	.name = "mcbsp",
+	.sysc = &omap2430_mcbsp_sysc,
+	.rev  = MCBSP_CONFIG_TYPE2,
+};
+
+/* mcbsp1 */
+static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = {
+	{ .name = "tx",		.irq = 59 },
+	{ .name = "rx",		.irq = 60 },
+	{ .name = "ovr",	.irq = 61 },
+	{ .name = "common",	.irq = 64 },
+};
+
+static struct omap_hwmod_dma_info omap2430_mcbsp1_sdma_chs[] = {
+	{ .name = "rx", .dma_req = 32 },
+	{ .name = "tx", .dma_req = 31 },
+};
+
+static struct omap_hwmod_addr_space omap2430_mcbsp1_addrs[] = {
+	{
+		.name		= "mpu",
+		.pa_start	= 0x48074000,
+		.pa_end		= 0x480740ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_core -> mcbsp1 */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp1 = {
+	.master		= &omap2430_l4_core_hwmod,
+	.slave		= &omap2430_mcbsp1_hwmod,
+	.clk		= "mcbsp1_ick",
+	.addr		= omap2430_mcbsp1_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap2430_mcbsp1_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mcbsp1 slave ports */
+static struct omap_hwmod_ocp_if *omap2430_mcbsp1_slaves[] = {
+	&omap2430_l4_core__mcbsp1,
+};
+
+static struct omap_hwmod omap2430_mcbsp1_hwmod = {
+	.name		= "mcbsp1",
+	.class		= &omap2430_mcbsp_hwmod_class,
+	.mpu_irqs	= omap2430_mcbsp1_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap2430_mcbsp1_irqs),
+	.sdma_reqs	= omap2430_mcbsp1_sdma_chs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap2430_mcbsp1_sdma_chs),
+	.main_clk	= "mcbsp1_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_MCBSP1_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
+		},
+	},
+	.slaves		= omap2430_mcbsp1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_mcbsp1_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* mcbsp2 */
+static struct omap_hwmod_irq_info omap2430_mcbsp2_irqs[] = {
+	{ .name = "tx",		.irq = 62 },
+	{ .name = "rx",		.irq = 63 },
+	{ .name = "common",	.irq = 16 },
+};
+
+static struct omap_hwmod_dma_info omap2430_mcbsp2_sdma_chs[] = {
+	{ .name = "rx", .dma_req = 34 },
+	{ .name = "tx", .dma_req = 33 },
+};
+
+static struct omap_hwmod_addr_space omap2430_mcbsp2_addrs[] = {
+	{
+		.name		= "mpu",
+		.pa_start	= 0x48076000,
+		.pa_end		= 0x480760ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_core -> mcbsp2 */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp2 = {
+	.master		= &omap2430_l4_core_hwmod,
+	.slave		= &omap2430_mcbsp2_hwmod,
+	.clk		= "mcbsp2_ick",
+	.addr		= omap2430_mcbsp2_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap2430_mcbsp2_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mcbsp2 slave ports */
+static struct omap_hwmod_ocp_if *omap2430_mcbsp2_slaves[] = {
+	&omap2430_l4_core__mcbsp2,
+};
+
+static struct omap_hwmod omap2430_mcbsp2_hwmod = {
+	.name		= "mcbsp2",
+	.class		= &omap2430_mcbsp_hwmod_class,
+	.mpu_irqs	= omap2430_mcbsp2_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap2430_mcbsp2_irqs),
+	.sdma_reqs	= omap2430_mcbsp2_sdma_chs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap2430_mcbsp2_sdma_chs),
+	.main_clk	= "mcbsp2_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_MCBSP2_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
+		},
+	},
+	.slaves		= omap2430_mcbsp2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_mcbsp2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* mcbsp3 */
+static struct omap_hwmod_irq_info omap2430_mcbsp3_irqs[] = {
+	{ .name = "tx",		.irq = 89 },
+	{ .name = "rx",		.irq = 90 },
+	{ .name = "common",	.irq = 17 },
+};
+
+static struct omap_hwmod_dma_info omap2430_mcbsp3_sdma_chs[] = {
+	{ .name = "rx", .dma_req = 18 },
+	{ .name = "tx", .dma_req = 17 },
+};
+
+static struct omap_hwmod_addr_space omap2430_mcbsp3_addrs[] = {
+	{
+		.name		= "mpu",
+		.pa_start	= 0x4808C000,
+		.pa_end		= 0x4808C0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_core -> mcbsp3 */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp3 = {
+	.master		= &omap2430_l4_core_hwmod,
+	.slave		= &omap2430_mcbsp3_hwmod,
+	.clk		= "mcbsp3_ick",
+	.addr		= omap2430_mcbsp3_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap2430_mcbsp3_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mcbsp3 slave ports */
+static struct omap_hwmod_ocp_if *omap2430_mcbsp3_slaves[] = {
+	&omap2430_l4_core__mcbsp3,
+};
+
+static struct omap_hwmod omap2430_mcbsp3_hwmod = {
+	.name		= "mcbsp3",
+	.class		= &omap2430_mcbsp_hwmod_class,
+	.mpu_irqs	= omap2430_mcbsp3_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap2430_mcbsp3_irqs),
+	.sdma_reqs	= omap2430_mcbsp3_sdma_chs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap2430_mcbsp3_sdma_chs),
+	.main_clk	= "mcbsp3_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP2430_EN_MCBSP3_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 2,
+			.idlest_idle_bit = OMAP2430_ST_MCBSP3_SHIFT,
+		},
+	},
+	.slaves		= omap2430_mcbsp3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_mcbsp3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* mcbsp4 */
+static struct omap_hwmod_irq_info omap2430_mcbsp4_irqs[] = {
+	{ .name = "tx",		.irq = 54 },
+	{ .name = "rx",		.irq = 55 },
+	{ .name = "common",	.irq = 18 },
+};
+
+static struct omap_hwmod_dma_info omap2430_mcbsp4_sdma_chs[] = {
+	{ .name = "rx", .dma_req = 20 },
+	{ .name = "tx", .dma_req = 19 },
+};
+
+static struct omap_hwmod_addr_space omap2430_mcbsp4_addrs[] = {
+	{
+		.name		= "mpu",
+		.pa_start	= 0x4808E000,
+		.pa_end		= 0x4808E0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_core -> mcbsp4 */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp4 = {
+	.master		= &omap2430_l4_core_hwmod,
+	.slave		= &omap2430_mcbsp4_hwmod,
+	.clk		= "mcbsp4_ick",
+	.addr		= omap2430_mcbsp4_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap2430_mcbsp4_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mcbsp4 slave ports */
+static struct omap_hwmod_ocp_if *omap2430_mcbsp4_slaves[] = {
+	&omap2430_l4_core__mcbsp4,
+};
+
+static struct omap_hwmod omap2430_mcbsp4_hwmod = {
+	.name		= "mcbsp4",
+	.class		= &omap2430_mcbsp_hwmod_class,
+	.mpu_irqs	= omap2430_mcbsp4_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap2430_mcbsp4_irqs),
+	.sdma_reqs	= omap2430_mcbsp4_sdma_chs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap2430_mcbsp4_sdma_chs),
+	.main_clk	= "mcbsp4_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP2430_EN_MCBSP4_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 2,
+			.idlest_idle_bit = OMAP2430_ST_MCBSP4_SHIFT,
+		},
+	},
+	.slaves		= omap2430_mcbsp4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_mcbsp4_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* mcbsp5 */
+static struct omap_hwmod_irq_info omap2430_mcbsp5_irqs[] = {
+	{ .name = "tx",		.irq = 81 },
+	{ .name = "rx",		.irq = 82 },
+	{ .name = "common",	.irq = 19 },
+};
+
+static struct omap_hwmod_dma_info omap2430_mcbsp5_sdma_chs[] = {
+	{ .name = "rx", .dma_req = 22 },
+	{ .name = "tx", .dma_req = 21 },
+};
+
+static struct omap_hwmod_addr_space omap2430_mcbsp5_addrs[] = {
+	{
+		.name		= "mpu",
+		.pa_start	= 0x48096000,
+		.pa_end		= 0x480960ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_core -> mcbsp5 */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp5 = {
+	.master		= &omap2430_l4_core_hwmod,
+	.slave		= &omap2430_mcbsp5_hwmod,
+	.clk		= "mcbsp5_ick",
+	.addr		= omap2430_mcbsp5_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap2430_mcbsp5_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mcbsp5 slave ports */
+static struct omap_hwmod_ocp_if *omap2430_mcbsp5_slaves[] = {
+	&omap2430_l4_core__mcbsp5,
+};
+
+static struct omap_hwmod omap2430_mcbsp5_hwmod = {
+	.name		= "mcbsp5",
+	.class		= &omap2430_mcbsp_hwmod_class,
+	.mpu_irqs	= omap2430_mcbsp5_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap2430_mcbsp5_irqs),
+	.sdma_reqs	= omap2430_mcbsp5_sdma_chs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap2430_mcbsp5_sdma_chs),
+	.main_clk	= "mcbsp5_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP2430_EN_MCBSP5_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 2,
+			.idlest_idle_bit = OMAP2430_ST_MCBSP5_SHIFT,
+		},
+	},
+	.slaves		= omap2430_mcbsp5_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_mcbsp5_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
 static __initdata struct omap_hwmod *omap2430_hwmods[] = {
 	&omap2430_l3_main_hwmod,
 	&omap2430_l4_core_hwmod,
@@ -1156,6 +1471,13 @@ static __initdata struct omap_hwmod *omap2430_hwmods[] = {
 	/* dma_system class*/
 	&omap2430_dma_system_hwmod,
 
+	/* mcbsp class */
+	&omap2430_mcbsp1_hwmod,
+	&omap2430_mcbsp2_hwmod,
+	&omap2430_mcbsp3_hwmod,
+	&omap2430_mcbsp4_hwmod,
+	&omap2430_mcbsp5_hwmod,
+
 	/* mcspi class */
 	&omap2430_mcspi1_hwmod,
 	&omap2430_mcspi2_hwmod,
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index dc1a282..64491a5 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -37,6 +37,8 @@ static struct platform_device omap_mcbsp##port_nr = {	\
 	.id	= OMAP_MCBSP##port_nr,			\
 }
 
+#define MCBSP_CONFIG_TYPE2	0x2
+
 #define OMAP7XX_MCBSP1_BASE	0xfffb1000
 #define OMAP7XX_MCBSP2_BASE	0xfffb1800
 
-- 
1.7.0.4


  parent reply	other threads:[~2011-02-18 14:28 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-18 14:22 [PATCH v3 00/13] OMAP: McBSP: hwmod adaptation and runtime conversion Kishon Vijay Abraham I
2011-02-18 14:22 ` [PATCH v3 01/13] OMAP: hwmod: allow hwmod to provide address space accessible from SDMA Kishon Vijay Abraham I
2011-02-18 14:22 ` [PATCH v3 02/13] OMAP: McBSP: Convert McBSP to platform device model Kishon Vijay Abraham I
2011-02-18 14:22 ` [PATCH v3 03/13] OMAP2420: hwmod data: Add McBSP Kishon Vijay Abraham I
2011-02-18 14:22 ` Kishon Vijay Abraham I [this message]
2011-02-18 14:22 ` [PATCH v3 05/13] OMAP3: " Kishon Vijay Abraham I
2011-02-18 14:22 ` [PATCH v3 06/13] OMAP4: hwmod: Naming of address space Kishon Vijay Abraham I
2011-02-18 14:22 ` [PATCH v3 07/13] OMAP3: hwmod: add dev_attr for McBSP sidetone Kishon Vijay Abraham I
2011-02-18 14:22 ` [PATCH v3 08/13] OMAP2+: McBSP: hwmod adaptation for McBSP Kishon Vijay Abraham I
2011-02-18 14:22 ` [PATCH v3 09/13] OMAP: McBSP: use omap_device APIs to modify SYSCONFIG Kishon Vijay Abraham I
2011-02-18 14:22 ` [PATCH v3 10/13] OMAP: McBSP: Add pm runtime support Kishon Vijay Abraham I
2011-02-18 14:22 ` [PATCH v3 11/13] OMAP: McBSP: APIs to pass DMA params from McBSP driver to client drivers Kishon Vijay Abraham I
2011-02-18 14:22 ` [PATCH v3 12/13] ASoC: McBSP: get hw params from McBSP driver Kishon Vijay Abraham I
2011-02-18 14:22 ` [PATCH v3 13/13] OMAP: hwmod: Removal of macros for data that is obtained from hwmod database Kishon Vijay Abraham I
2011-02-21 10:02 ` [PATCH v3 00/13] OMAP: McBSP: hwmod adaptation and runtime conversion Jarkko Nikula
2011-02-22  7:31 ` Peter Ujfalusi
2011-02-23 10:13   ` ABRAHAM, KISHON VIJAY
2011-02-23 21:34     ` Tony Lindgren
2011-02-24  6:21       ` ABRAHAM, KISHON VIJAY
2011-02-24  9:02         ` ABRAHAM, KISHON VIJAY

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1298038948-19871-5-git-send-email-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=b-cousson@ti.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=charu@ti.com \
    --cc=jhnikula@gmail.com \
    --cc=khilman@ti.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=p-basak2@ti.com \
    --cc=paul@pwsan.com \
    --cc=peter.ujfalusi@nokia.com \
    --cc=shubhrajyoti@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox