[PATCH] omap: panda: Add TI-ST driver support

[Guy Eilam <guy@wizery.com>]

Added the KIM (Kernel initialization module for the
Shared Transport driver) device entry in the board file

Only the Blutooth enable GPIO is set for now

Signed-off-by: Guy Eilam <guy@wizery.com>
---
 arch/arm/mach-omap2/board-omap4panda.c |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index cd43020..c5994ad 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -50,6 +50,16 @@
 #define GPIO_WIFI_PMENA		43
 #define GPIO_WIFI_IRQ		53
 
+/* wl127x BT, FM, GPS connectivity chip */
+static int wl1271_gpios[] = {46, -1, -1};
+static struct platform_device wl1271_device = {
+	.name	= "kim",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &wl1271_gpios,
+	},
+};
+
 static struct gpio_led gpio_leds[] = {
 	{
 		.name			= "pandaboard::status1",
@@ -78,6 +88,7 @@ static struct platform_device leds_gpio = {
 
 static struct platform_device *panda_devices[] __initdata = {
 	&leds_gpio,
+	&wl1271_device,
 };
 
 static void __init omap4_panda_init_early(void)
-- 
1.7.1