From: Charulatha V <charu@ti.com>
To: linux-omap@vger.kernel.org
Cc: khilman@ti.com, tony@atomide.com, paul@pwsan.com,
Charulatha V <charu@ti.com>
Subject: [PATCH 1/5] OMAP: GPIO: make gpio_context part of gpio_bank structure
Date: Mon, 28 Feb 2011 16:27:46 +0530 [thread overview]
Message-ID: <1298890670-5481-2-git-send-email-charu@ti.com> (raw)
In-Reply-To: <1298890670-5481-1-git-send-email-charu@ti.com>
gpio_context array, which is used to save gpio bank's context,
is used only for OMAP3 architecture.
Move gpio_context as part of gpio_bank structure so that
it can be specific to each gpio bank and can be used for
any OMAP architecture
Signed-off-by: Charulatha V <charu@ti.com>
Tested-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
(2430-SDP testing)
---
TODO: extend the gpio save/restore context function for OMAP4
architecture. This is done in one of the next patches in this
series
arch/arm/plat-omap/gpio.c | 72 +++++++++++++++++++++-----------------------
1 files changed, 34 insertions(+), 38 deletions(-)
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 971d186..c6ab0ff 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -133,6 +133,19 @@
#define OMAP4_GPIO_CLEARDATAOUT 0x0190
#define OMAP4_GPIO_SETDATAOUT 0x0194
+struct gpio_regs {
+ u32 irqenable1;
+ u32 irqenable2;
+ u32 wake_en;
+ u32 ctrl;
+ u32 oe;
+ u32 leveldetect0;
+ u32 leveldetect1;
+ u32 risingdetect;
+ u32 fallingdetect;
+ u32 dataout;
+};
+
struct gpio_bank {
unsigned long pbase;
void __iomem *base;
@@ -145,7 +158,7 @@ struct gpio_bank {
#endif
u32 non_wakeup_gpios;
u32 enabled_non_wakeup_gpios;
-
+ struct gpio_regs context;
u32 saved_datain;
u32 saved_fallingdetect;
u32 saved_risingdetect;
@@ -161,23 +174,6 @@ struct gpio_bank {
int stride;
};
-#ifdef CONFIG_ARCH_OMAP3
-struct omap3_gpio_regs {
- u32 irqenable1;
- u32 irqenable2;
- u32 wake_en;
- u32 ctrl;
- u32 oe;
- u32 leveldetect0;
- u32 leveldetect1;
- u32 risingdetect;
- u32 fallingdetect;
- u32 dataout;
-};
-
-static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
-#endif
-
/*
* TODO: Cleanup gpio_bank usage as it is having information
* related to all instances of the device
@@ -2043,25 +2039,25 @@ void omap_gpio_save_context(void)
/* saving banks from 2-6 only since GPIO1 is in WKUP */
for (i = 1; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
- gpio_context[i].irqenable1 =
+ bank->context.irqenable1 =
__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
- gpio_context[i].irqenable2 =
+ bank->context.irqenable2 =
__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
- gpio_context[i].wake_en =
+ bank->context.wake_en =
__raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
- gpio_context[i].ctrl =
+ bank->context.ctrl =
__raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
- gpio_context[i].oe =
+ bank->context.oe =
__raw_readl(bank->base + OMAP24XX_GPIO_OE);
- gpio_context[i].leveldetect0 =
+ bank->context.leveldetect0 =
__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
- gpio_context[i].leveldetect1 =
+ bank->context.leveldetect1 =
__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
- gpio_context[i].risingdetect =
+ bank->context.risingdetect =
__raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
- gpio_context[i].fallingdetect =
+ bank->context.fallingdetect =
__raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- gpio_context[i].dataout =
+ bank->context.dataout =
__raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
}
}
@@ -2073,25 +2069,25 @@ void omap_gpio_restore_context(void)
for (i = 1; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
- __raw_writel(gpio_context[i].irqenable1,
+ __raw_writel(bank->context.irqenable1,
bank->base + OMAP24XX_GPIO_IRQENABLE1);
- __raw_writel(gpio_context[i].irqenable2,
+ __raw_writel(bank->context.irqenable2,
bank->base + OMAP24XX_GPIO_IRQENABLE2);
- __raw_writel(gpio_context[i].wake_en,
+ __raw_writel(bank->context.wake_en,
bank->base + OMAP24XX_GPIO_WAKE_EN);
- __raw_writel(gpio_context[i].ctrl,
+ __raw_writel(bank->context.ctrl,
bank->base + OMAP24XX_GPIO_CTRL);
- __raw_writel(gpio_context[i].oe,
+ __raw_writel(bank->context.oe,
bank->base + OMAP24XX_GPIO_OE);
- __raw_writel(gpio_context[i].leveldetect0,
+ __raw_writel(bank->context.leveldetect0,
bank->base + OMAP24XX_GPIO_LEVELDETECT0);
- __raw_writel(gpio_context[i].leveldetect1,
+ __raw_writel(bank->context.leveldetect1,
bank->base + OMAP24XX_GPIO_LEVELDETECT1);
- __raw_writel(gpio_context[i].risingdetect,
+ __raw_writel(bank->context.risingdetect,
bank->base + OMAP24XX_GPIO_RISINGDETECT);
- __raw_writel(gpio_context[i].fallingdetect,
+ __raw_writel(bank->context.fallingdetect,
bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- __raw_writel(gpio_context[i].dataout,
+ __raw_writel(bank->context.dataout,
bank->base + OMAP24XX_GPIO_DATAOUT);
}
}
--
1.7.1
next prev parent reply other threads:[~2011-02-28 10:56 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-28 10:57 [PATCH 0/5] OMAP: GPIO: use PM runtime framework Charulatha V
2011-02-28 10:57 ` Charulatha V [this message]
2011-02-28 10:57 ` [PATCH 2/5] OMAP: GPIO: use pwrdmn name to find wkup dmn GPIO Charulatha V
2011-03-04 21:51 ` Kevin Hilman
2011-03-05 5:21 ` Varadarajan, Charulatha
2011-03-07 18:56 ` Kevin Hilman
2011-03-08 2:25 ` Paul Walmsley
2011-03-08 5:45 ` Varadarajan, Charulatha
2011-02-28 10:57 ` [PATCH 3/5] OMAP4: GPIO: save/restore context Charulatha V
2011-02-28 10:57 ` [PATCH 4/5] OMAP: GPIO: call save/restore ctxt from GPIO driver Charulatha V
2011-03-04 22:20 ` Kevin Hilman
2011-03-05 5:15 ` Varadarajan, Charulatha
2011-02-28 10:57 ` [PATCH 5/5] OMAP: GPIO: use PM runtime framework Charulatha V
2011-03-04 22:59 ` Kevin Hilman
2011-03-05 5:10 ` Varadarajan, Charulatha
2011-03-07 18:55 ` Kevin Hilman
2011-03-08 15:05 ` Varadarajan, Charulatha
2011-03-08 18:23 ` Kevin Hilman
2011-03-09 1:24 ` Varadarajan, Charulatha
2011-03-09 10:23 ` Varadarajan, Charulatha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1298890670-5481-2-git-send-email-charu@ti.com \
--to=charu@ti.com \
--cc=khilman@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).