* [PATCH v3 1/2] OMAP: DSS2: Add support for LG Philips LB035Q02 panel
2011-03-05 13:58 [PATCH v3 0/2] Add DSS2 support on Overo Steve Sakoman
@ 2011-03-05 13:58 ` Steve Sakoman
2011-03-05 13:58 ` [PATCH v3 2/2] OMAP: DSS2: Add DSS2 support for Overo Steve Sakoman
2011-03-05 14:51 ` [PATCH v3 0/2] Add DSS2 support on Overo Tomi Valkeinen
2 siblings, 0 replies; 4+ messages in thread
From: Steve Sakoman @ 2011-03-05 13:58 UTC (permalink / raw)
To: linux-omap; +Cc: tomi.valkeinen, Steve Sakoman
This patch adds support for the Gumstix Palo35 expansion board
which utilizes the 320 x 240 pixel LG.Philips LB035Q02 LCD Panel
Signed-off-by: Steve Sakoman <steve@sakoman.com>
---
drivers/video/omap2/displays/Kconfig | 6 +
drivers/video/omap2/displays/Makefile | 1 +
.../omap2/displays/panel-lgphilips-lb035q02.c | 279 ++++++++++++++++++++
3 files changed, 286 insertions(+), 0 deletions(-)
create mode 100644 drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
index 940cab3..d18ad6b 100644
--- a/drivers/video/omap2/displays/Kconfig
+++ b/drivers/video/omap2/displays/Kconfig
@@ -9,6 +9,12 @@ config PANEL_GENERIC_DPI
Supports LCD Panel used in TI SDP3430 and EVM boards,
OMAP3517 EVM boards and CM-T35.
+config PANEL_LGPHILIPS_LB035Q02
+ tristate "LG.Philips LB035Q02 LCD Panel"
+ depends on OMAP2_DSS && SPI
+ help
+ LCD Panel used on the Gumstix Overo Palo35
+
config PANEL_SHARP_LS037V7DW01
tristate "Sharp LS037V7DW01 LCD Panel"
depends on OMAP2_DSS
diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
index 861f025..0f601ab 100644
--- a/drivers/video/omap2/displays/Makefile
+++ b/drivers/video/omap2/displays/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_PANEL_GENERIC_DPI) += panel-generic-dpi.o
+obj-$(CONFIG_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o
diff --git a/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
new file mode 100644
index 0000000..271324d
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
@@ -0,0 +1,279 @@
+/*
+ * LCD panel driver for LG.Philips LB035Q02
+ *
+ * Author: Steve Sakoman <steve@sakoman.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/mutex.h>
+
+#include <plat/display.h>
+
+struct lb035q02_data {
+ struct mutex lock;
+};
+
+static struct omap_video_timings lb035q02_timings = {
+ .x_res = 320,
+ .y_res = 240,
+
+ .pixel_clock = 6500,
+
+ .hsw = 2,
+ .hfp = 20,
+ .hbp = 68,
+
+ .vsw = 2,
+ .vfp = 4,
+ .vbp = 18,
+};
+
+static int lb035q02_panel_power_on(struct omap_dss_device *dssdev)
+{
+ int r;
+
+ if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+ return 0;
+
+ r = omapdss_dpi_display_enable(dssdev);
+ if (r)
+ goto err0;
+
+ if (dssdev->platform_enable) {
+ r = dssdev->platform_enable(dssdev);
+ if (r)
+ goto err1;
+ }
+
+ return 0;
+err1:
+ omapdss_dpi_display_disable(dssdev);
+err0:
+ return r;
+}
+
+static void lb035q02_panel_power_off(struct omap_dss_device *dssdev)
+{
+ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+ return;
+
+ if (dssdev->platform_disable)
+ dssdev->platform_disable(dssdev);
+
+ omapdss_dpi_display_disable(dssdev);
+}
+
+static int lb035q02_panel_probe(struct omap_dss_device *dssdev)
+{
+ struct lb035q02_data *ld;
+ int r;
+
+ dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+ OMAP_DSS_LCD_IHS;
+ dssdev->panel.timings = lb035q02_timings;
+
+ ld = kzalloc(sizeof(*ld), GFP_KERNEL);
+ if (!ld) {
+ r = -ENOMEM;
+ goto err;
+ }
+ mutex_init(&ld->lock);
+ dev_set_drvdata(&dssdev->dev, ld);
+ return 0;
+err:
+ return r;
+}
+
+static void lb035q02_panel_remove(struct omap_dss_device *dssdev)
+{
+ struct lb035q02_data *ld = dev_get_drvdata(&dssdev->dev);
+
+ kfree(ld);
+}
+
+static int lb035q02_panel_enable(struct omap_dss_device *dssdev)
+{
+ struct lb035q02_data *ld = dev_get_drvdata(&dssdev->dev);
+ int r;
+
+ mutex_lock(&ld->lock);
+
+ r = lb035q02_panel_power_on(dssdev);
+ if (r)
+ goto err;
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ mutex_unlock(&ld->lock);
+ return 0;
+err:
+ mutex_unlock(&ld->lock);
+ return r;
+}
+
+static void lb035q02_panel_disable(struct omap_dss_device *dssdev)
+{
+ struct lb035q02_data *ld = dev_get_drvdata(&dssdev->dev);
+
+ mutex_lock(&ld->lock);
+
+ lb035q02_panel_power_off(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+
+ mutex_unlock(&ld->lock);
+}
+
+static int lb035q02_panel_suspend(struct omap_dss_device *dssdev)
+{
+ struct lb035q02_data *ld = dev_get_drvdata(&dssdev->dev);
+
+ mutex_lock(&ld->lock);
+
+ lb035q02_panel_power_off(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+
+ mutex_unlock(&ld->lock);
+ return 0;
+}
+
+static int lb035q02_panel_resume(struct omap_dss_device *dssdev)
+{
+ struct lb035q02_data *ld = dev_get_drvdata(&dssdev->dev);
+ int r;
+
+ mutex_lock(&ld->lock);
+
+ r = lb035q02_panel_power_on(dssdev);
+ if (r)
+ goto err;
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ mutex_unlock(&ld->lock);
+ return 0;
+err:
+ mutex_unlock(&ld->lock);
+ return r;
+}
+
+static struct omap_dss_driver lb035q02_driver = {
+ .probe = lb035q02_panel_probe,
+ .remove = lb035q02_panel_remove,
+
+ .enable = lb035q02_panel_enable,
+ .disable = lb035q02_panel_disable,
+ .suspend = lb035q02_panel_suspend,
+ .resume = lb035q02_panel_resume,
+
+ .driver = {
+ .name = "lgphilips_lb035q02_panel",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int lb035q02_write_reg(struct spi_device *spi, u8 reg, u16 val)
+{
+ struct spi_message msg;
+ struct spi_transfer index_xfer = {
+ .len = 3,
+ .cs_change = 1,
+ };
+ struct spi_transfer value_xfer = {
+ .len = 3,
+ };
+ u8 buffer[16];
+
+ spi_message_init(&msg);
+
+ /* register index */
+ buffer[0] = 0x70;
+ buffer[1] = 0x00;
+ buffer[2] = reg & 0x7f;
+ index_xfer.tx_buf = buffer;
+ spi_message_add_tail(&index_xfer, &msg);
+
+ /* register value */
+ buffer[4] = 0x72;
+ buffer[5] = val >> 8;
+ buffer[6] = val;
+ value_xfer.tx_buf = buffer + 4;
+ spi_message_add_tail(&value_xfer, &msg);
+
+ return spi_sync(spi, &msg);
+}
+
+static void init_lb035q02_panel(struct spi_device *spi)
+{
+ /* Init sequence from page 28 of the lb035q02 spec */
+ lb035q02_write_reg(spi, 0x01, 0x6300);
+ lb035q02_write_reg(spi, 0x02, 0x0200);
+ lb035q02_write_reg(spi, 0x03, 0x0177);
+ lb035q02_write_reg(spi, 0x04, 0x04c7);
+ lb035q02_write_reg(spi, 0x05, 0xffc0);
+ lb035q02_write_reg(spi, 0x06, 0xe806);
+ lb035q02_write_reg(spi, 0x0a, 0x4008);
+ lb035q02_write_reg(spi, 0x0b, 0x0000);
+ lb035q02_write_reg(spi, 0x0d, 0x0030);
+ lb035q02_write_reg(spi, 0x0e, 0x2800);
+ lb035q02_write_reg(spi, 0x0f, 0x0000);
+ lb035q02_write_reg(spi, 0x16, 0x9f80);
+ lb035q02_write_reg(spi, 0x17, 0x0a0f);
+ lb035q02_write_reg(spi, 0x1e, 0x00c1);
+ lb035q02_write_reg(spi, 0x30, 0x0300);
+ lb035q02_write_reg(spi, 0x31, 0x0007);
+ lb035q02_write_reg(spi, 0x32, 0x0000);
+ lb035q02_write_reg(spi, 0x33, 0x0000);
+ lb035q02_write_reg(spi, 0x34, 0x0707);
+ lb035q02_write_reg(spi, 0x35, 0x0004);
+ lb035q02_write_reg(spi, 0x36, 0x0302);
+ lb035q02_write_reg(spi, 0x37, 0x0202);
+ lb035q02_write_reg(spi, 0x3a, 0x0a0d);
+ lb035q02_write_reg(spi, 0x3b, 0x0806);
+}
+
+static int __devinit lb035q02_panel_spi_probe(struct spi_device *spi)
+{
+ init_lb035q02_panel(spi);
+ return omap_dss_register_driver(&lb035q02_driver);
+}
+
+static int __devexit lb035q02_panel_spi_remove(struct spi_device *spi)
+{
+ omap_dss_unregister_driver(&lb035q02_driver);
+ return 0;
+}
+
+static struct spi_driver lb035q02_spi_driver = {
+ .driver = {
+ .name = "lgphilips_lb035q02_panel-spi",
+ .owner = THIS_MODULE,
+ },
+ .probe = lb035q02_panel_spi_probe,
+ .remove = __devexit_p(lb035q02_panel_spi_remove),
+};
+
+static int __init lb035q02_panel_drv_init(void)
+{
+ return spi_register_driver(&lb035q02_spi_driver);
+}
+
+static void __exit lb035q02_panel_drv_exit(void)
+{
+ spi_unregister_driver(&lb035q02_spi_driver);
+}
+
+module_init(lb035q02_panel_drv_init);
+module_exit(lb035q02_panel_drv_exit);
+MODULE_LICENSE("GPL");
--
1.7.0.4
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v3 2/2] OMAP: DSS2: Add DSS2 support for Overo
2011-03-05 13:58 [PATCH v3 0/2] Add DSS2 support on Overo Steve Sakoman
2011-03-05 13:58 ` [PATCH v3 1/2] OMAP: DSS2: Add support for LG Philips LB035Q02 panel Steve Sakoman
@ 2011-03-05 13:58 ` Steve Sakoman
2011-03-05 14:51 ` [PATCH v3 0/2] Add DSS2 support on Overo Tomi Valkeinen
2 siblings, 0 replies; 4+ messages in thread
From: Steve Sakoman @ 2011-03-05 13:58 UTC (permalink / raw)
To: linux-omap; +Cc: tomi.valkeinen, Steve Sakoman
This patch adds DSS2 support for DVI, S-video, the 480x272 Samsung
LTE430WQ-F0C panel, and the 320x240 LG.Philips LB035Q02 panel.
Signed-off-by: Steve Sakoman <steve@sakoman.com>
---
arch/arm/mach-omap2/board-overo.c | 239 +++++++++++++++++++++++++++++++------
1 files changed, 202 insertions(+), 37 deletions(-)
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index a33ec0e..a2c17c9 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -28,6 +28,7 @@
#include <linux/platform_device.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -41,10 +42,14 @@
#include <plat/board.h>
#include <plat/common.h>
+#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include <mach/gpio.h>
#include <plat/gpmc.h>
#include <mach/hardware.h>
#include <plat/nand.h>
+#include <plat/mcspi.h>
+#include <plat/mux.h>
#include <plat/usb.h>
#include "mux.h"
@@ -68,8 +73,6 @@
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-#include <plat/mcspi.h>
-#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
static struct omap2_mcspi_device_config ads7846_mcspi_config = {
@@ -94,18 +97,6 @@ static struct ads7846_platform_data ads7846_config = {
.keep_vref_on = 1,
};
-static struct spi_board_info overo_spi_board_info[] __initdata = {
- {
- .modalias = "ads7846",
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 1500000,
- .controller_data = &ads7846_mcspi_config,
- .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
- .platform_data = &ads7846_config,
- }
-};
-
static void __init overo_ads7846_init(void)
{
if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
@@ -115,9 +106,6 @@ static void __init overo_ads7846_init(void)
printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n");
return;
}
-
- spi_register_board_info(overo_spi_board_info,
- ARRAY_SIZE(overo_spi_board_info));
}
#else
@@ -233,6 +221,137 @@ static inline void __init overo_init_smsc911x(void)
static inline void __init overo_init_smsc911x(void) { return; }
#endif
+/* DSS */
+static int lcd_enabled;
+static int dvi_enabled;
+
+#define OVERO_GPIO_LCD_EN 144
+#define OVERO_GPIO_LCD_BL 145
+
+static void __init overo_display_init(void)
+{
+ if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) &&
+ (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0))
+ gpio_export(OVERO_GPIO_LCD_EN, 0);
+ else
+ printk(KERN_ERR "could not obtain gpio for "
+ "OVERO_GPIO_LCD_EN\n");
+
+ if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) &&
+ (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0))
+ gpio_export(OVERO_GPIO_LCD_BL, 0);
+ else
+ printk(KERN_ERR "could not obtain gpio for "
+ "OVERO_GPIO_LCD_BL\n");
+}
+
+static int overo_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+ if (lcd_enabled) {
+ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+ return -EINVAL;
+ }
+ dvi_enabled = 1;
+
+ return 0;
+}
+
+static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+ dvi_enabled = 0;
+}
+
+static struct panel_generic_dpi_data dvi_panel = {
+ .name = "generic",
+ .platform_enable = overo_panel_enable_dvi,
+ .platform_disable = overo_panel_disable_dvi,
+};
+
+static struct omap_dss_device overo_dvi_device = {
+ .name = "dvi",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
+ .phy.dpi.data_lines = 24,
+};
+
+static struct omap_dss_device overo_tv_device = {
+ .name = "tv",
+ .driver_name = "venc",
+ .type = OMAP_DISPLAY_TYPE_VENC,
+ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+};
+
+static int overo_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+ if (dvi_enabled) {
+ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+ return -EINVAL;
+ }
+
+ gpio_set_value(OVERO_GPIO_LCD_EN, 1);
+ gpio_set_value(OVERO_GPIO_LCD_BL, 1);
+ lcd_enabled = 1;
+ return 0;
+}
+
+static void overo_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+ gpio_set_value(OVERO_GPIO_LCD_EN, 0);
+ gpio_set_value(OVERO_GPIO_LCD_BL, 0);
+ lcd_enabled = 0;
+}
+
+static struct panel_generic_dpi_data lcd43_panel = {
+ .name = "samsung_lte430wq_f0c",
+ .platform_enable = overo_panel_enable_lcd,
+ .platform_disable = overo_panel_disable_lcd,
+};
+
+static struct omap_dss_device overo_lcd43_device = {
+ .name = "lcd43",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .driver_name = "generic_dpi_panel",
+ .data = &lcd43_panel,
+ .phy.dpi.data_lines = 24,
+};
+
+#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
+ defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
+static struct omap_dss_device overo_lcd35_device = {
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .name = "lcd35",
+ .driver_name = "lgphilips_lb035q02_panel",
+ .phy.dpi.data_lines = 24,
+ .platform_enable = overo_panel_enable_lcd,
+ .platform_disable = overo_panel_disable_lcd,
+};
+#endif
+
+static struct omap_dss_device *overo_dss_devices[] = {
+ &overo_dvi_device,
+ &overo_tv_device,
+#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
+ defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
+ &overo_lcd35_device,
+#endif
+ &overo_lcd43_device,
+};
+
+static struct omap_dss_board_info overo_dss_data = {
+ .num_devices = ARRAY_SIZE(overo_dss_devices),
+ .devices = overo_dss_devices,
+ .default_device = &overo_dvi_device,
+};
+
+static struct regulator_consumer_supply overo_vdda_dac_supply =
+ REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
+
+static struct regulator_consumer_supply overo_vdds_dsi_supply[] = {
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
+
static struct mtd_partition overo_nand_partitions[] = {
{
.name = "xloader",
@@ -358,6 +477,37 @@ static struct regulator_init_data overo_vmmc1 = {
.consumer_supplies = &overo_vmmc1_supply,
};
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data overo_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &overo_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data overo_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(overo_vdds_dsi_supply),
+ .consumer_supplies = overo_vdds_dsi_supply,
+};
+
+/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
+
static struct twl4030_codec_audio_data overo_audio_data = {
.audio_mclk = 26000000,
};
@@ -367,8 +517,6 @@ static struct twl4030_codec_data overo_codec_data = {
.audio = &overo_audio_data,
};
-/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
-
static struct twl4030_platform_data overo_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
@@ -376,6 +524,8 @@ static struct twl4030_platform_data overo_twldata = {
.usb = &overo_usb_data,
.codec = &overo_codec_data,
.vmmc1 = &overo_vmmc1,
+ .vdac = &overo_vdac,
+ .vpll2 = &overo_vpll2,
};
static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
@@ -396,32 +546,46 @@ static int __init overo_i2c_init(void)
return 0;
}
-static struct platform_device overo_lcd_device = {
- .name = "overo_lcd",
- .id = -1,
-};
-
-static struct omap_lcd_config overo_lcd_config __initdata = {
- .ctrl_name = "internal",
+static struct spi_board_info overo_spi_board_info[] __initdata = {
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+ {
+ .modalias = "ads7846",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &ads7846_mcspi_config,
+ .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
+ .platform_data = &ads7846_config,
+ },
+#endif
+#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
+ defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
+ {
+ .modalias = "lgphilips_lb035q02_panel-spi",
+ .bus_num = 1,
+ .chip_select = 1,
+ .max_speed_hz = 500000,
+ .mode = SPI_MODE_3,
+ },
+#endif
};
-static struct omap_board_config_kernel overo_config[] __initdata = {
- { OMAP_TAG_LCD, &overo_lcd_config },
-};
+static int __init overo_spi_init(void)
+{
+ overo_ads7846_init();
+ spi_register_board_info(overo_spi_board_info,
+ ARRAY_SIZE(overo_spi_board_info));
+ return 0;
+}
static void __init overo_init_early(void)
{
- omap_board_config = overo_config;
- omap_board_config_size = ARRAY_SIZE(overo_config);
omap2_init_common_infrastructure();
omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
}
-static struct platform_device *overo_devices[] __initdata = {
- &overo_lcd_device,
-};
-
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
@@ -449,13 +613,14 @@ static void __init overo_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
overo_i2c_init();
- platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
+ omap_display_init(&overo_dss_data);
omap_serial_init();
overo_flash_init();
usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
- overo_ads7846_init();
+ overo_spi_init();
overo_init_smsc911x();
+ overo_display_init();
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
--
1.7.0.4
^ permalink raw reply related [flat|nested] 4+ messages in thread