linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tarun Kanti DebBarma <tarun.kanti@ti.com>
To: linux-omap@vger.kernel.org
Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com>, Thara Gopinath <thara@ti.com>
Subject: [PATCH v12 5/9] OMAP: dmtimer: platform driver
Date: Wed,  9 Mar 2011 05:15:44 +0530	[thread overview]
Message-ID: <1299627948-20040-6-git-send-email-tarun.kanti@ti.com> (raw)
In-Reply-To: <1299627948-20040-1-git-send-email-tarun.kanti@ti.com>

Add dmtimer platform driver functions which include:
(1) platform driver initialization
(2) driver probe function
(3) driver remove function

Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Signed-off-by: Thara Gopinath <thara@ti.com>
Acked-by: Cousson, Benoit <b-cousson@ti.com>
---
 arch/arm/plat-omap/dmtimer.c              |  167 +++++++++++++++++++++++++++-
 arch/arm/plat-omap/include/plat/dmtimer.h |    4 +
 2 files changed, 165 insertions(+), 6 deletions(-)

diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 1bfaf09..51dc0b6 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -35,15 +35,13 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/list.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/module.h>
-#include <mach/hardware.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
 #include <plat/dmtimer.h>
 #include <mach/irqs.h>
 
@@ -156,6 +154,13 @@
 #define OMAP_TIMER_TICK_INT_MASK_COUNT_REG				\
 		(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
 
+/*
+ * OMAP4 IP revision has different register offsets
+ * for interrupt registers and functional registers.
+ */
+#define VERSION2_TIMER_WAKEUP_EN_REG_OFFSET     0x14
+#define VERSION2_TIMER_STAT_REG_OFFSET          0x10
+
 static int dm_timer_count;
 
 #ifdef CONFIG_ARCH_OMAP2
@@ -258,6 +263,7 @@ static const char **dm_source_names;
 static struct clk **dm_source_clocks;
 
 static spinlock_t dm_timer_lock;
+static LIST_HEAD(omap_timer_list);
 
 /*
  * Reads timer registers in posted and non-posted mode. The posted mode bit
@@ -689,6 +695,155 @@ int omap_dm_timers_active(void)
 }
 EXPORT_SYMBOL_GPL(omap_dm_timers_active);
 
+/**
+ * omap_dm_timer_probe - probe function called for every registered device
+ * @pdev:	pointer to current timer platform device
+ *
+ * Called by driver framework at the end of device registration for all
+ * timer devices.
+ */
+static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
+{
+	int ret;
+	unsigned long flags;
+	struct omap_dm_timer *timer;
+	struct resource *mem, *irq, *ioarea;
+	struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "%s: no platform data.\n", __func__);
+		return -ENODEV;
+	}
+
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (unlikely(!irq)) {
+		dev_err(&pdev->dev, "%s: no IRQ resource.\n", __func__);
+		ret = -ENODEV;
+		goto err_free_pdev;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!mem)) {
+		dev_err(&pdev->dev, "%s: no memory resource.\n", __func__);
+		ret = -ENODEV;
+		goto err_free_pdev;
+	}
+
+	ioarea = request_mem_region(mem->start, resource_size(mem),
+			pdev->name);
+	if (!ioarea) {
+		dev_err(&pdev->dev, "%s: region already claimed.\n", __func__);
+		ret = -EBUSY;
+		goto err_free_pdev;
+	}
+
+	timer = kzalloc(sizeof(struct omap_dm_timer), GFP_KERNEL);
+	if (!timer) {
+		dev_err(&pdev->dev, "%s: no memory for omap_dm_timer.\n",
+			__func__);
+		ret = -ENOMEM;
+		goto err_release_ioregion;
+	}
+
+	timer->io_base = ioremap(mem->start, resource_size(mem));
+	if (!timer->io_base) {
+		dev_err(&pdev->dev, "%s: ioremap failed.\n", __func__);
+		ret = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	if (pdata->timer_ip_type == OMAP_TIMER_IP_VERSION_2) {
+		timer->func_offset = VERSION2_TIMER_WAKEUP_EN_REG_OFFSET;
+		timer->intr_offset = VERSION2_TIMER_STAT_REG_OFFSET;
+	} else {
+		timer->func_offset = 0;
+		timer->intr_offset = 0;
+	}
+
+	timer->id = pdev->id;
+	timer->irq = irq->start;
+	timer->pdev = pdev;
+	timer->reserved = 0;
+
+	/* add the timer element to the list */
+	spin_lock_irqsave(&dm_timer_lock, flags);
+	list_add_tail(&timer->node, &omap_timer_list);
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+	dev_dbg(&pdev->dev, "Device Probed.\n");
+
+	return 0;
+
+err_free_mem:
+	kfree(timer);
+
+err_release_ioregion:
+	release_mem_region(mem->start, resource_size(mem));
+
+err_free_pdev:
+	kfree(pdata);
+	platform_device_unregister(pdev);
+
+	return ret;
+}
+
+/**
+ * omap_dm_timer_remove - cleanup a registered timer device
+ * @pdev:	pointer to current timer platform device
+ *
+ * Called by driver framework whenever a timer device is unregistered.
+ * In addition to freeing platform resources it also deletes the timer
+ * entry from the local list.
+ */
+static int __devexit omap_dm_timer_remove(struct platform_device *pdev)
+{
+	struct omap_dm_timer *timer, *tmp;
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	spin_lock_irqsave(&dm_timer_lock, flags);
+	list_for_each_entry_safe(timer, tmp, &omap_timer_list, node) {
+		if (timer->pdev->id == pdev->id) {
+			kfree(timer->pdev->dev.platform_data);
+			platform_device_del(timer->pdev);
+			list_del(&timer->node);
+			kfree(timer);
+			ret = 0;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+	return ret;
+}
+
+static struct platform_driver omap_dm_timer_driver = {
+	.probe  = omap_dm_timer_probe,
+	.remove = omap_dm_timer_remove,
+	.driver = {
+		.name   = "omap_timer",
+	},
+};
+
+static int __init omap_dm_timer_driver_init(void)
+{
+	return platform_driver_register(&omap_dm_timer_driver);
+}
+
+static void __exit omap_dm_timer_driver_exit(void)
+{
+	platform_driver_unregister(&omap_dm_timer_driver);
+}
+
+early_platform_init("earlytimer", &omap_dm_timer_driver);
+module_init(omap_dm_timer_driver_init);
+module_exit(omap_dm_timer_driver_exit);
+
+MODULE_DESCRIPTION("OMAP Dual-Mode Timer Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");
+
 int __init omap_dm_timer_init(void)
 {
 	struct omap_dm_timer *timer;
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 0d1a571..c184bf0 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -63,13 +63,17 @@ struct omap_secure_timer_dev_attr {
 
 struct omap_dm_timer {
 	unsigned long phys_base;
+	int id;
 	int irq;
 	struct clk *iclk, *fclk;
 	void __iomem *io_base;
 	unsigned reserved:1;
 	unsigned enabled:1;
 	unsigned posted:1;
+	u8 func_offset;
+	u8 intr_offset;
 	struct platform_device *pdev;
+	struct list_head node;
 };
 
 extern struct omap_dm_timer *gptimer_wakeup;
-- 
1.6.0.4


  parent reply	other threads:[~2011-03-08 23:43 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-08 23:45 [PATCH v12 0/9] dmtimer adaptation to platform_driver Tarun Kanti DebBarma
2011-03-08 23:45 ` [PATCH v12 1/9] OMAP2+: dmtimer: add device names to flck nodes Tarun Kanti DebBarma
2011-03-08 23:45 ` [PATCH v12 2/9] OMAP4: hwmod data: add dmtimer version information Tarun Kanti DebBarma
2011-03-08 23:45 ` [PATCH v12 3/9] OMAP1: dmtimer: conversion to platform devices Tarun Kanti DebBarma
2011-03-08 23:45 ` [PATCH v12 4/9] OMAP2+: dmtimer: convert " Tarun Kanti DebBarma
2011-03-09 21:42   ` Tony Lindgren
2011-03-10 15:29     ` DebBarma, Tarun Kanti
2011-03-10 22:52   ` Kevin Hilman
2011-03-11  4:36     ` DebBarma, Tarun Kanti
2011-03-10 23:14   ` Kevin Hilman
2011-03-11  4:20     ` DebBarma, Tarun Kanti
2011-03-11 19:13       ` Tony Lindgren
2011-03-12  0:03         ` Kevin Hilman
2011-03-14 17:12           ` Tony Lindgren
2011-03-17 22:00             ` Kevin Hilman
2011-03-19  0:27               ` Tony Lindgren
2011-03-19  4:34                 ` Santosh Shilimkar
2011-03-21 17:07                   ` Tony Lindgren
2011-03-21 18:33                     ` Kevin Hilman
2011-03-21 19:11                       ` Tony Lindgren
2011-03-25  6:55                         ` DebBarma, Tarun Kanti
2011-03-25 15:55                           ` Tony Lindgren
2011-03-29 17:13                             ` Tony Lindgren
2011-03-29 17:52                               ` Tony Lindgren
2011-03-10 23:21   ` Kevin Hilman
2011-03-11  4:13     ` DebBarma, Tarun Kanti
2011-03-08 23:45 ` Tarun Kanti DebBarma [this message]
2011-03-08 23:45 ` [PATCH v12 6/9] dmtimer: switch-over to platform device driver Tarun Kanti DebBarma
2011-03-09 22:02   ` Tony Lindgren
2011-03-10 15:27     ` DebBarma, Tarun Kanti
2011-03-10 17:56       ` Tony Lindgren
2011-03-11  5:35         ` DebBarma, Tarun Kanti
2011-03-11 12:45           ` G, Manjunath Kondaiah
2011-03-11 19:15             ` Tony Lindgren
2011-03-12  4:20               ` G, Manjunath Kondaiah
2011-03-11 19:14           ` Tony Lindgren
2011-03-14  6:48             ` DebBarma, Tarun Kanti
2011-03-08 23:45 ` [PATCH v12 7/9] OMAP: dmtimer: pm_runtime support Tarun Kanti DebBarma
2011-03-08 23:45 ` [PATCH v12 8/9] OMAP: dmtimer: add timeout to low-level routines Tarun Kanti DebBarma
2011-03-08 23:45 ` [PATCH v12 9/9] OMAP: dmtimer: use mutex instead of spinlock Tarun Kanti DebBarma

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1299627948-20040-6-git-send-email-tarun.kanti@ti.com \
    --to=tarun.kanti@ti.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=thara@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).