From: Rajendra Nayak <rnayak@ti.com>
To: linux-omap@vger.kernel.org
Cc: paul@pwsan.com, b-cousson@ti.com, Rajendra Nayak <rnayak@ti.com>
Subject: [RFC 1/3] OMAP3: PRM: Add grpsel programming support
Date: Mon, 21 Mar 2011 16:40:21 +0530 [thread overview]
Message-ID: <1300705823-12784-2-git-send-email-rnayak@ti.com> (raw)
In-Reply-To: <1300705823-12784-1-git-send-email-rnayak@ti.com>
Add api's to support programming the
PM_<processor>GRPSEL_<domain> registers which are
needed for proper peripheral wakeup configuration.
Also add unique identifiers for all initiators.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
---
arch/arm/mach-omap2/prcm-common.h | 1 -
arch/arm/mach-omap2/prm2xxx_3xxx.c | 70 ++++++++++++++++++++++++++
arch/arm/mach-omap2/prm2xxx_3xxx.h | 4 ++
arch/arm/plat-omap/include/plat/omap_hwmod.h | 7 +++
4 files changed, 81 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 0363dcb..be6b3c2 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -397,7 +397,6 @@
#define OMAP3430_EN_CORE_SHIFT 0
#define OMAP3430_EN_CORE_MASK (1 << 0)
-
/*
* MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
* submodule to exit hardreset
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 051213f..77aade2 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -19,11 +19,21 @@
#include <plat/common.h>
#include <plat/cpu.h>
#include <plat/prcm.h>
+#include <plat/omap_hwmod.h>
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "prm-regbits-34xx.h"
+#include "prm2xxx_3xxx.h"
+
+static const u8 prm_mpugrpsel_offs[] = {
+ OMAP3430_PM_MPUGRPSEL1, 0, OMAP3430ES2_PM_MPUGRPSEL3,
+};
+
+static const u8 prm_ivagrpsel_offs[] = {
+ OMAP3430_PM_IVAGRPSEL1, 0, OMAP3430ES2_PM_IVAGRPSEL3,
+};
u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
{
@@ -156,3 +166,63 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift)
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
}
+
+static int _get_initiator_grpsel(u8 grpsel_id, u8 initiator_id,
+ u8 *prm_grpsel_reg)
+{
+ switch (initiator_id) {
+ case OMAP_INIT_MPU:
+ if (grpsel_id > ARRAY_SIZE(prm_mpugrpsel_offs))
+ return -EINVAL;
+ *prm_grpsel_reg = prm_mpugrpsel_offs[grpsel_id - 1];
+ break;
+ case OMAP_INIT_IVA:
+ if (grpsel_id > ARRAY_SIZE(prm_ivagrpsel_offs))
+ return -EINVAL;
+ *prm_grpsel_reg = prm_ivagrpsel_offs[grpsel_id - 1];
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+int omap2_prm_module_enable_initiator_wakeup(s16 prcm_mod, u8 grpsel_id,
+ u8 grpsel_shift, u8 initiator_id)
+{
+ u8 prm_grpsel_reg;
+ u32 mask;
+ int ret;
+
+ if (!grpsel_id || !cpu_is_omap34xx())
+ return -EINVAL;
+
+ mask = 1 << grpsel_shift;
+
+ ret = _get_initiator_grpsel(grpsel_id, initiator_id, &prm_grpsel_reg);
+ if (ret)
+ return ret;
+
+ omap2_prm_set_mod_reg_bits(mask, prcm_mod, prm_grpsel_reg);
+ return 0;
+}
+
+int omap2_prm_module_disable_initiator_wakeup(s16 prcm_mod, u8 grpsel_id,
+ u8 grpsel_shift, u8 initiator_id)
+{
+ u8 prm_grpsel_reg;
+ u32 mask;
+ int ret;
+
+ if (!grpsel_id || !cpu_is_omap34xx())
+ return -EINVAL;
+
+ mask = 1 << grpsel_shift;
+
+ ret = _get_initiator_grpsel(grpsel_id, initiator_id, &prm_grpsel_reg);
+ if (ret)
+ return ret;
+
+ omap2_prm_clear_mod_reg_bits(mask, prcm_mod, prm_grpsel_reg);
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index a1fc62a..08ae2b9 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -302,6 +302,10 @@ extern u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift);
+extern int omap2_prm_module_enable_initiator_wakeup(s16 module, u8 grpsel_id,
+ u8 shift, u8 init_id);
+extern int omap2_prm_module_disable_initiator_wakeup(s16 module, u8 grpsel_id,
+ u8 shift, u8 init_id);
#endif /* CONFIG_ARCH_OMAP4 */
#endif
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 1adea9c..4bd7354 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -431,6 +431,13 @@ struct omap_hwmod_omap4_prcm {
#define _HWMOD_STATE_IDLE 5
#define _HWMOD_STATE_DISABLED 6
+/* Unique initiator identifiers */
+#define OMAP_INIT_MPU 1
+#define OMAP_INIT_IVA 2
+#define OMAP_INIT_DSP 3
+#define OMAP_INIT_MPU_M3 4
+#define OMAP_INIT_SDMA 5
+
/**
* struct omap_hwmod_class - the type of an IP block
* @name: name of the hwmod_class
--
1.7.0.4
next prev parent reply other threads:[~2011-03-21 11:10 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-21 11:10 [RFC 0/3] OMAP3: Support processor group selection by a peripheral Rajendra Nayak
2011-03-21 11:10 ` Rajendra Nayak [this message]
2011-03-21 11:10 ` [RFC 2/3] OMAP3: hwmod: Add support to associate an initiator with a hwmod Rajendra Nayak
2011-03-21 11:10 ` [RFC 3/3] OMAP3: omap_device: Add support to associate a device with an initiator Rajendra Nayak
2011-03-21 13:12 ` Hema Kalliguddi
2011-03-22 8:28 ` Rajendra Nayak
2011-03-21 13:08 ` [RFC 2/3] OMAP3: hwmod: Add support to associate an initiator with a hwmod Hema Kalliguddi
2011-03-22 8:28 ` Rajendra Nayak
2011-03-22 8:31 ` Hema Kalliguddi
2011-03-21 13:08 ` [RFC 1/3] OMAP3: PRM: Add grpsel programming support Hema Kalliguddi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1300705823-12784-2-git-send-email-rnayak@ti.com \
--to=rnayak@ti.com \
--cc=b-cousson@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).