From: Santosh Shilimkar <santosh.shilimkar@ti.com>
To: linux-omap@vger.kernel.org
Cc: khilman@ti.com, rnayak@ti.com,
linux-arm-kernel@lists.infradead.org,
Santosh Shilimkar <santosh.shilimkar@ti.com>
Subject: [pm-core][PATCH v3 14/21] OMAP4: pm-debug: Add wakeup timer and debug counters
Date: Mon, 28 Mar 2011 14:52:30 +0530 [thread overview]
Message-ID: <1301304157-2466-15-git-send-email-santosh.shilimkar@ti.com> (raw)
In-Reply-To: <1301304157-2466-1-git-send-email-santosh.shilimkar@ti.com>
This patch adds configurable wakeup timer support in suspend. Also
for statistics pm counter support is added.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
---
arch/arm/mach-omap2/omap4-mpuss-lowpower.c | 4 ++++
arch/arm/mach-omap2/pm-debug.c | 11 +++++++++--
arch/arm/mach-omap2/pm44xx.c | 6 ++++++
3 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/omap4-mpuss-lowpower.c b/arch/arm/mach-omap2/omap4-mpuss-lowpower.c
index 7348d29..3cd9e8b 100644
--- a/arch/arm/mach-omap2/omap4-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap4-mpuss-lowpower.c
@@ -289,6 +289,8 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
if (cpu)
goto cpu_prepare;
+ pwrdm_pre_transition();
+
/*
* Check MPUSS next state and save GIC if needed
* GIC lost during MPU OFF and OSWR
@@ -334,6 +336,8 @@ cpu_prepare:
gic_dist_enable();
}
+ pwrdm_post_transition();
+
ret:
return 0;
}
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index a5a83b3..232623c 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -604,9 +604,11 @@ static int __init pm_dbg_init(void)
if (pm_dbg_init_done)
return 0;
- if (cpu_is_omap34xx())
+ if (cpu_is_omap34xx()) {
pm_dbg_reg_modules = omap3_pm_reg_modules;
- else {
+ } else if (cpu_is_omap44xx()) {
+ /* Allow pm_dbg_init on OMAP4. */
+ } else {
printk(KERN_ERR "%s: only OMAP3 supported\n", __func__);
return -ENODEV;
}
@@ -622,6 +624,9 @@ static int __init pm_dbg_init(void)
pwrdm_for_each(pwrdms_setup, (void *)d);
+ if (cpu_is_omap44xx())
+ goto skip_reg_debufs;
+
pm_dbg_dir = debugfs_create_dir("registers", d);
if (IS_ERR(pm_dbg_dir))
return PTR_ERR(pm_dbg_dir);
@@ -641,6 +646,8 @@ static int __init pm_dbg_init(void)
&enable_off_mode, &pm_dbg_option_fops);
(void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUSR, d,
&sleep_while_idle, &pm_dbg_option_fops);
+
+skip_reg_debufs:
(void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d,
&wakeup_timer_seconds, &pm_dbg_option_fops);
(void) debugfs_create_file("wakeup_timer_milliseconds",
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 051461c..af3a56d 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -21,6 +21,7 @@
#include "powerdomain.h"
#include "clockdomain.h"
+#include "pm.h"
struct power_state {
struct powerdomain *pwrdm;
@@ -40,6 +41,11 @@ static int omap4_pm_suspend(void)
int state, ret = 0;
u32 cpu_id = smp_processor_id();
+ /* Wakeup timer from suspend */
+ if (wakeup_timer_seconds || wakeup_timer_milliseconds)
+ omap2_pm_wakeup_on_timer(wakeup_timer_seconds,
+ wakeup_timer_milliseconds);
+
/* Save current powerdomain state */
list_for_each_entry(pwrst, &pwrst_list, node) {
pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
--
1.6.0.4
next prev parent reply other threads:[~2011-03-28 9:22 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-28 9:22 [pm-core][PATCH v3 00/21] OMAP4: PM: suspend, CPU-hotplug and CPUilde support Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 01/21] OMAP4: PM: Add omap WakeupGen module support Santosh Shilimkar
2011-03-28 20:50 ` Tony Lindgren
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 17:01 ` Tony Lindgren
2011-03-30 6:15 ` Santosh
2011-03-30 18:40 ` Tony Lindgren
2011-03-31 6:28 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-03-29 5:49 ` Santosh Shilimkar
2011-04-02 6:10 ` Colin Cross
2011-04-02 9:40 ` Santosh Shilimkar
2011-04-02 19:47 ` Colin Cross
2011-04-03 5:51 ` Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 02/21] OMAP4: Use WARN_ON() instead of BUG_ON() with graceful exit Santosh Shilimkar
2011-03-28 20:53 ` Tony Lindgren
2011-03-31 8:35 ` Santosh Shilimkar
2011-03-31 14:04 ` Kevin Hilman
2011-03-31 14:39 ` Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 03/21] OMAP4: PM: Export omap4_get_base*() rather than global address pointers Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 04/21] OMAP4: PM: Add SAR RAM support Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 05/21] OMAP4: PM: Add CPUX OFF mode support Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 06/21] OMAP4: PM: Initialise all the clockdomains to supported states Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 07/21] OMAP4: PM: Program CPU1 to hit OFF when off-lined Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 08/21] OMAP4: PM: CPU1 wakeup workaround from Low power modes Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 09/21] OMAP4: PM: Add GIC distributor and interface enable/disable accessory API Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 10/21] OMAP4: PM: Add GIC save/restore support Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 11/21] OMAP4: PM: Add WakeupGen " Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 12/21] OMAP4: PM: Add L2 cache lowpower support Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 13/21] OMAP4: suspend: Add MPUSS RET and OFF support Santosh Shilimkar
2011-03-28 9:22 ` Santosh Shilimkar [this message]
2011-03-28 21:00 ` [pm-core][PATCH v3 14/21] OMAP4: pm-debug: Add wakeup timer and debug counters Tony Lindgren
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-29 6:27 ` Shilimkar, Santosh
2011-03-29 5:50 ` Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 15/21] OMAP4: cpuidle: Basic CPUidle support Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 16/21] OMAP4: cpuidle: Add MPUSS RET OFF states Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 17/21] OMAP4: cpuidle: Switch to gptimer from twd in deeper C-states Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 18/21] OMAP4: cpuidle: Add CPU hotplug notifier and prepare() hook Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 19/21] OMAP4: Remove un-used do_wfi() macro Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 20/21] OMAP4: PM: Set static dependency between MPUSS-EMIF and MPUSS-L3_1 Santosh Shilimkar
2011-03-28 9:22 ` [pm-core][PATCH v3 21/21] OMAP4: PM: Avoid omap4_pm_init() on OMAP4430 ES1.0 Santosh Shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1301304157-2466-15-git-send-email-santosh.shilimkar@ti.com \
--to=santosh.shilimkar@ti.com \
--cc=khilman@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=rnayak@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).