linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@nokia.com>
To: Tony Lindgren <tony@atomide.com>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>,
	linux-omap Mailing List <linux-omap@vger.kernel.org>,
	linux-mmc Mailing List <linux-mmc@vger.kernel.org>,
	linux-arm Mailing List <linux-arm-kernel@lists.infradead.org>,
	Andy Shevchenko <ext-andriy.shevchenko@nokia.com>,
	Adrian Hunter <adrian.hunter@nokia.com>
Subject: [PATCH 14/22] mmc: omap_hsmmc: split same pieces of code to separate functions
Date: Thu,  5 May 2011 14:51:14 +0300	[thread overview]
Message-ID: <1304596282-4095-15-git-send-email-adrian.hunter@nokia.com> (raw)
In-Reply-To: <1304596282-4095-1-git-send-email-adrian.hunter@nokia.com>

From: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>

There are few places with the same functionality. This patch creates two
functions omap_hsmmc_set_bus_width() and omap_hsmmc_set_bus_mode() to do the
job.

Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
---
 drivers/mmc/host/omap_hsmmc.c |   85 ++++++++++++++++++++---------------------
 1 files changed, 41 insertions(+), 44 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 3c76911..e7c181a 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -645,6 +645,41 @@ static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host)
 	omap_hsmmc_start_clock(host);
 }
 
+static void omap_hsmmc_set_bus_width(struct omap_hsmmc_host *host)
+{
+	struct mmc_ios *ios = &host->mmc->ios;
+	u32 con;
+
+	con = OMAP_HSMMC_READ(host->base, CON);
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_8:
+		OMAP_HSMMC_WRITE(host->base, CON, con | DW8);
+		break;
+	case MMC_BUS_WIDTH_4:
+		OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8);
+		OMAP_HSMMC_WRITE(host->base, HCTL,
+			OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT);
+		break;
+	case MMC_BUS_WIDTH_1:
+		OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8);
+		OMAP_HSMMC_WRITE(host->base, HCTL,
+			OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT);
+		break;
+	}
+}
+
+static void omap_hsmmc_set_bus_mode(struct omap_hsmmc_host *host)
+{
+	struct mmc_ios *ios = &host->mmc->ios;
+	u32 con;
+
+	con = OMAP_HSMMC_READ(host->base, CON);
+	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
+		OMAP_HSMMC_WRITE(host->base, CON, con | OD);
+	else
+		OMAP_HSMMC_WRITE(host->base, CON, con & ~OD);
+}
+
 #ifdef CONFIG_PM
 
 /*
@@ -656,7 +691,7 @@ static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host)
 	struct mmc_ios *ios = &host->mmc->ios;
 	struct omap_mmc_platform_data *pdata = host->pdata;
 	int context_loss = 0;
-	u32 hctl, capa, con;
+	u32 hctl, capa;
 	unsigned long timeout;
 
 	if (pdata->get_context_loss_count) {
@@ -718,30 +753,12 @@ static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host)
 	if (host->power_mode == MMC_POWER_OFF)
 		goto out;
 
-	con = OMAP_HSMMC_READ(host->base, CON);
-	switch (ios->bus_width) {
-	case MMC_BUS_WIDTH_8:
-		OMAP_HSMMC_WRITE(host->base, CON, con | DW8);
-		break;
-	case MMC_BUS_WIDTH_4:
-		OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8);
-		OMAP_HSMMC_WRITE(host->base, HCTL,
-			OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT);
-		break;
-	case MMC_BUS_WIDTH_1:
-		OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8);
-		OMAP_HSMMC_WRITE(host->base, HCTL,
-			OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT);
-		break;
-	}
+	omap_hsmmc_set_bus_width(host);
 
 	omap_hsmmc_set_clock(host);
 
-	con = OMAP_HSMMC_READ(host->base, CON);
-	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
-		OMAP_HSMMC_WRITE(host->base, CON, con | OD);
-	else
-		OMAP_HSMMC_WRITE(host->base, CON, con & ~OD);
+	omap_hsmmc_set_bus_mode(host);
+
 out:
 	host->context_loss = context_loss;
 
@@ -1636,7 +1653,6 @@ static void omap_hsmmc_request(struct mmc_host *mmc, struct mmc_request *req)
 static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct omap_hsmmc_host *host = mmc_priv(mmc);
-	u32 con;
 	int do_send_init_stream = 0;
 
 	mmc_host_enable(host->mmc);
@@ -1662,22 +1678,7 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	/* FIXME: set registers based only on changes to ios */
 
-	con = OMAP_HSMMC_READ(host->base, CON);
-	switch (mmc->ios.bus_width) {
-	case MMC_BUS_WIDTH_8:
-		OMAP_HSMMC_WRITE(host->base, CON, con | DW8);
-		break;
-	case MMC_BUS_WIDTH_4:
-		OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8);
-		OMAP_HSMMC_WRITE(host->base, HCTL,
-			OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT);
-		break;
-	case MMC_BUS_WIDTH_1:
-		OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8);
-		OMAP_HSMMC_WRITE(host->base, HCTL,
-			OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT);
-		break;
-	}
+	omap_hsmmc_set_bus_width(host);
 
 	if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) {
 		/* Only MMC1 can interface at 3V without some flavor
@@ -1702,11 +1703,7 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (do_send_init_stream)
 		send_init_stream(host);
 
-	con = OMAP_HSMMC_READ(host->base, CON);
-	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
-		OMAP_HSMMC_WRITE(host->base, CON, con | OD);
-	else
-		OMAP_HSMMC_WRITE(host->base, CON, con & ~OD);
+	omap_hsmmc_set_bus_mode(host);
 
 	if (host->power_mode == MMC_POWER_OFF)
 		mmc_host_disable(host->mmc);
-- 
1.7.0.4


  parent reply	other threads:[~2011-05-05 11:51 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-05 11:51 [PATCH 00/22] omap_hsmmc patches Adrian Hunter
2011-05-05 11:51 ` [PATCH 01/22] OMAP: sDMA: descriptor autoloading feature Adrian Hunter
2011-05-06  6:22   ` Tony Lindgren
2011-05-05 11:51 ` [PATCH 02/22] OMAP: DMA: add omap_dma_has_sglist() Adrian Hunter
2011-05-05 11:51 ` [PATCH 03/22] OMAP: DMA: Ensure the sglist registers are cleared Adrian Hunter
2011-05-05 11:51 ` [PATCH 04/22] mmc: omap hsmmc: adaptation of sdma descriptor Adrian Hunter
2011-05-05 11:51 ` [PATCH 05/22] mmc: omap_hsmmc: fix dma sglist use Adrian Hunter
2011-05-05 11:51 ` [PATCH 06/22] mmc: omap_hsmmc: limit scatterlist size for sDMA autoloading Adrian Hunter
2011-05-05 11:51 ` [PATCH 07/22] mmc: omap_hsmmc: fix missing mmc_release_host() in no_off case Adrian Hunter
2011-05-05 13:08   ` Sergei Shtylyov
2011-05-05 11:51 ` [PATCH 08/22] mmc: omap_hsmmc: correct debug report error status mnemonics Adrian Hunter
2011-05-06  8:35   ` S, Venkatraman
2011-05-05 11:51 ` [PATCH 09/22] mmc: omap_hsmmc: move hardcoded frequency constants to definition block Adrian Hunter
2011-05-05 11:51 ` [PATCH 10/22] mmc: omap_hsmmc: reduce a bit the error handlers in probe() Adrian Hunter
2011-05-05 11:51 ` [PATCH 11/22] mmc: omap_hsmmc: split duplicate code to calc_divisor() function Adrian Hunter
2011-05-05 11:51 ` [PATCH 12/22] mmc: omap_hsmmc: introduce start_clock and re-use stop_clock Adrian Hunter
2011-05-05 11:51 ` [PATCH 13/22] mmc: omap_hsmmc: fix few bugs when set the clock divisor Adrian Hunter
2011-05-05 12:53   ` Grazvydas Ignotas
2011-05-05 11:51 ` Adrian Hunter [this message]
2011-05-05 11:51 ` [PATCH 15/22] OMAP: hsmmc: Do not mux the slot if non default muxing is already done Adrian Hunter
2011-05-05 11:51 ` [PATCH 16/22] OMAP: board-rm680: set MMC nomux flag Adrian Hunter
2011-05-05 11:51 ` [PATCH 17/22] mmc: omap_hsmmc: ensure pbias configuration is always done Adrian Hunter
2011-05-05 11:51 ` [PATCH 18/22] mmc: omap_hsmmc: fix oops in omap_hsmmc_dma_cb Adrian Hunter
2011-05-05 11:51 ` [PATCH 19/22] OMAP: hsmmc: implement clock switcher Adrian Hunter
2011-05-05 13:34   ` Grazvydas Ignotas
2011-05-05 11:51 ` [PATCH 20/22] mmc: omap_hsmmc: adjust host controller clock in regard to current OPP Adrian Hunter
2011-05-05 11:51 ` [PATCH 21/22] OMAP: hsmmc: add platform data for eMMC hardware reset gpio Adrian Hunter
2011-05-05 11:51 ` [PATCH 22/22] mmc: omap_hsmmc: add a hardware reset before initialization Adrian Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1304596282-4095-15-git-send-email-adrian.hunter@nokia.com \
    --to=adrian.hunter@nokia.com \
    --cc=ext-andriy.shevchenko@nokia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=madhu.cr@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).