From: "Govindraj.R" <govindraj.raja@ti.com>
To: linux-omap@vger.kernel.org, paul@pwsan.com
Cc: linux-arm-kernel@lists.infradead.org,
"Govindraj.R" <govindraj.raja@ti.com>,
Tony Lindgren <tony@atomide.com>,
Benoit Cousson <b-cousson@ti.com>, Kevin Hilman <khilman@ti.com>,
Rajendra Nayak <rnayak@ti.com>
Subject: [PATCH 1/2] OMAP2+: hwmod: Add API to enable IO ring wakeup.
Date: Fri, 6 May 2011 15:39:16 +0530 [thread overview]
Message-ID: <1304676557-15613-2-git-send-email-govindraj.raja@ti.com> (raw)
In-Reply-To: <1304676557-15613-1-git-send-email-govindraj.raja@ti.com>
Add API to enable IO pad wakeup capability based on mux dynamic pad and
wake_up enable flag available from hwmod_mux initialization.
Use the wakeup_enable flag and enable wakeup capability
for the given pads. Wakeup capability will be enabled/disabled
during hmwod idle transition based on whether wakeup_flag is
set or cleared.
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
---
arch/arm/mach-omap2/omap_hwmod.c | 35 +++++++++++++++++++++++++
arch/arm/plat-omap/include/plat/omap_device.h | 1 +
arch/arm/plat-omap/include/plat/omap_hwmod.h | 1 +
arch/arm/plat-omap/omap_device.c | 27 +++++++++++++++++++
4 files changed, 64 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index e034294..97d3302 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2369,3 +2369,38 @@ int omap_hwmod_no_setup_reset(struct omap_hwmod *oh)
return 0;
}
+
+/**
+ * omap_hwmod_enable_ioring_wakeup - Set wakeup bit for iopad ring.
+ * @oh: struct omap_hwmod *
+ * @enable: based on 0 or 1 set or unset wakeup bit.
+ *
+ * Traverse through dynamic pads, if pad is enabled then
+ * set wakeup enable bit flag for the mux pin. Wakeup pad bit
+ * will be set during hwmod idle transistion.
+ * Return error if pads are not enabled or not available.
+ */
+int omap_hwmod_enable_ioring_wakeup(struct omap_hwmod *oh, bool enable)
+{
+ struct omap_device_pad *pad;
+ int ret = -EINVAL, j;
+ int val = 0;
+
+ /* Enable pin mux to make pad wake-up capable */
+ if (enable)
+ val = OMAP_WAKEUP_EN;
+ else
+ val = ~OMAP_WAKEUP_EN;
+
+ if (oh->mux->enabled) {
+ for (j = 0; j < oh->mux->nr_pads_dynamic; j++) {
+ pad = oh->mux->pads_dynamic[j];
+ if (pad->flags & OMAP_DEVICE_PAD_WAKEUP) {
+ pad->idle = pad->enable | val;
+ ret = 0;
+ }
+ }
+ }
+
+ return ret;
+}
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index e4c349f..ce8e3e8 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -117,6 +117,7 @@ int omap_device_enable_hwmods(struct omap_device *od);
int omap_device_disable_clocks(struct omap_device *od);
int omap_device_enable_clocks(struct omap_device *od);
+int omap_device_enable_ioring_wakeup(struct platform_device *pdev, bool enable);
/*
* Entries should be kept in latency order ascending
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 1adea9c..b7f8d1b 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -601,6 +601,7 @@ int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
+int omap_hwmod_enable_ioring_wakeup(struct omap_hwmod *oh, bool enable);
/*
* Chip variant-specific hwmod init routines - XXX should be converted
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 9bbda9a..82fb4a6 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -742,6 +742,33 @@ void __iomem *omap_device_get_rt_va(struct omap_device *od)
return omap_hwmod_get_mpu_rt_va(od->hwmods[0]);
}
+/**
+ * omap_device_enable_ioring_wakeup - Set wakeup bit for iopad ring.
+ * @pdev: platform_device for which wakeup needs to be set.
+ * @enable: based on true or false set or unset ioring wakeup enable flag.
+ *
+ * Caller should ensure this is called if device_may_wakeup(dev) is true
+ * traverse through each hwmod and check each available pads
+ * if pad is enabled then set wakeup enable flag for the mux pin.
+ * Return error if pads are not enabled or not available.
+ * Wakeup enable flag will be we used during hwmod idle transistion
+ * to enable or disable wakeup capability for the pad.
+ */
+int omap_device_enable_ioring_wakeup(struct platform_device *pdev, bool enable)
+{
+ int ret = -EINVAL, i;
+ struct omap_device *od;
+ struct omap_hwmod *oh;
+
+ od = _find_by_pdev(pdev);
+ for (i = 0; i < od->hwmods_cnt; i++) {
+ oh = od->hwmods[i];
+ ret = omap_hwmod_enable_ioring_wakeup(oh, enable);
+ }
+
+ return ret;
+}
+
/*
* Public functions intended for use in omap_device_pm_latency
* .activate_func and .deactivate_func function pointers
--
1.7.1
next prev parent reply other threads:[~2011-05-06 10:14 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-06 10:09 [PATCH 0/2] OMAP2+: hwmod: Add hwmod's API's for pad wakeup Govindraj.R
2011-05-06 10:09 ` Govindraj.R [this message]
2011-05-06 20:37 ` [PATCH 1/2] OMAP2+: hwmod: Add API to enable IO ring wakeup Paul Walmsley
2011-05-07 17:54 ` Todd Poynor
2011-05-06 10:09 ` [PATCH 2/2] OMAP2+: hwmod: Add API to check IO PAD wakeup status Govindraj.R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1304676557-15613-2-git-send-email-govindraj.raja@ti.com \
--to=govindraj.raja@ti.com \
--cc=b-cousson@ti.com \
--cc=khilman@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).