From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: tony@atomide.com
Cc: linux-omap@vger.kernel.org,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
Gregoire Gentil <gregoire@gentil.com>
Subject: [PATCH 2/6] OMAP: omap3touchbook: Remove unused lcd stuff
Date: Mon, 9 May 2011 10:36:03 +0300 [thread overview]
Message-ID: <1304926567-26814-3-git-send-email-tomi.valkeinen@ti.com> (raw)
In-Reply-To: <1304926567-26814-1-git-send-email-tomi.valkeinen@ti.com>
board-omap3touchbook.c adds an LCD device, but the kernel doesn't
contain a driver for the device. So let's remove the unneeded LCD
device.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Gregoire Gentil <gregoire@gentil.com>
---
arch/arm/mach-omap2/board-omap3touchbook.c | 18 ------------------
1 files changed, 0 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 127cb17..1c717a4 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -115,15 +115,6 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
-static struct platform_device omap3_touchbook_lcd_device = {
- .name = "omap3touchbook_lcd",
- .id = -1,
-};
-
-static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
static struct regulator_consumer_supply touchbook_vmmc1_supply = {
.supply = "vmmc",
};
@@ -181,12 +172,10 @@ static struct twl4030_gpio_platform_data touchbook_gpio_data = {
static struct regulator_consumer_supply touchbook_vdac_supply = {
.supply = "vdac",
- .dev = &omap3_touchbook_lcd_device.dev,
};
static struct regulator_consumer_supply touchbook_vdvi_supply = {
.supply = "vdvi",
- .dev = &omap3_touchbook_lcd_device.dev,
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -403,10 +392,6 @@ static struct platform_device keys_gpio = {
},
};
-static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = {
- { OMAP_TAG_LCD, &omap3_touchbook_lcd_config },
-};
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -429,7 +414,6 @@ static void __init omap3_touchbook_init_irq(void)
}
static struct platform_device *omap3_touchbook_devices[] __initdata = {
- &omap3_touchbook_lcd_device,
&leds_gpio,
&keys_gpio,
};
@@ -510,8 +494,6 @@ static struct omap_musb_board_data musb_board_data = {
static void __init omap3_touchbook_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_board_config = omap3_touchbook_config;
- omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config);
pm_power_off = omap3_touchbook_poweroff;
--
1.7.4.1
next prev parent reply other threads:[~2011-05-09 7:36 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-09 7:36 [PATCH 0/6] OMAP: board file changes for DSS2 porting Tomi Valkeinen
2011-05-09 7:36 ` [PATCH 1/6] OMAP: RX51: Remove unused old omapfb stuff Tomi Valkeinen
2011-05-09 7:36 ` Tomi Valkeinen [this message]
2011-05-09 7:36 ` [PATCH 3/6] OMAP: 2420SDP: Port the display driver to new DSS2 Tomi Valkeinen
2011-05-09 8:21 ` Igor Grinberg
2011-05-09 16:57 ` Tomi Valkeinen
2011-05-09 7:36 ` [PATCH 4/6] OMAP: LDP: " Tomi Valkeinen
2011-05-09 8:08 ` stanley.miao
2011-05-11 4:58 ` Janorkar, Mayuresh
2011-05-11 6:32 ` Tomi Valkeinen
2011-05-12 6:40 ` Igor Grinberg
2011-05-12 7:16 ` Igor Grinberg
2011-05-12 8:38 ` Igor Grinberg
2011-05-12 8:47 ` Janorkar, Mayuresh
2011-05-12 11:20 ` Igor Grinberg
2011-05-12 11:47 ` Tomi Valkeinen
2011-05-12 14:36 ` Janorkar, Mayuresh
2011-05-12 14:47 ` Tomi Valkeinen
2011-05-12 14:50 ` Janorkar, Mayuresh
2011-05-12 14:59 ` Tomi Valkeinen
2011-05-16 8:53 ` Tomi Valkeinen
2011-05-16 11:13 ` Igor Grinberg
2011-05-17 11:49 ` Tomi Valkeinen
2011-05-17 11:56 ` Tomi Valkeinen
2011-05-17 12:28 ` Igor Grinberg
2011-05-17 13:16 ` Tomi Valkeinen
2011-05-16 11:26 ` Janorkar, Mayuresh
2011-05-17 11:44 ` Tomi Valkeinen
2011-05-09 7:36 ` [PATCH 5/6] OMAP: H4: " Tomi Valkeinen
2011-05-09 7:36 ` [PATCH 6/6] OMAP: Apollon: " Tomi Valkeinen
2011-05-09 17:01 ` [PATCH 0/6] OMAP: board file changes for DSS2 porting Tomi Valkeinen
2011-05-10 13:35 ` Tony Lindgren
2011-05-10 14:03 ` Tomi Valkeinen
2011-05-11 7:08 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1304926567-26814-3-git-send-email-tomi.valkeinen@ti.com \
--to=tomi.valkeinen@ti.com \
--cc=gregoire@gentil.com \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).