From: "Govindraj.R" <govindraj.raja@ti.com>
To: linux-omap@vger.kernel.org
Cc: Tony Lindgren <tony@atomide.com>, Nishant Kamat <nskamat@ti.com>,
"Govindraj.R" <govindraj.raja@ti.com>
Subject: [PATCH 1/3] OMAP2+: Fix debug section mistmatch warnings
Date: Wed, 1 Jun 2011 11:28:16 +0530 [thread overview]
Message-ID: <1306907896-28789-1-git-send-email-govindraj.raja@ti.com> (raw)
Fix the below debug section mismatch warnings.
while compiling kernel with CONFIG_DEBUG_SECTION_MISMATCH=y
WARNING: vmlinux.o(.data+0x38638): Section mismatch in reference from the
variable serial*_data to the (unknown reference) .init.data:(unknown)
The variable serial*_data references
the (unknown reference) __initdata (unknown)
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
Reported-by: Nishant Kamat <nskamat@ti.com>
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
---
Based on 3.0-rc1
arch/arm/mach-omap2/board-3430sdp.c | 6 +++---
arch/arm/mach-omap2/board-4430sdp.c | 6 +++---
arch/arm/mach-omap2/board-omap4panda.c | 6 +++---
3 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ae2963a..5dac974 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -622,19 +622,19 @@ static struct omap_device_pad serial3_pads[] __initdata = {
OMAP_MUX_MODE0),
};
-static struct omap_board_data serial1_data = {
+static struct omap_board_data serial1_data __initdata = {
.id = 0,
.pads = serial1_pads,
.pads_cnt = ARRAY_SIZE(serial1_pads),
};
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 73fa90b..f90623d 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -681,19 +681,19 @@ static struct omap_device_pad serial4_pads[] __initdata = {
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
-static struct omap_board_data serial4_data = {
+static struct omap_board_data serial4_data __initdata = {
.id = 3,
.pads = serial4_pads,
.pads_cnt = ARRAY_SIZE(serial4_pads),
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 90485fc..84a8e4a 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -526,19 +526,19 @@ static struct omap_device_pad serial4_pads[] __initdata = {
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
-static struct omap_board_data serial4_data = {
+static struct omap_board_data serial4_data __initdata = {
.id = 3,
.pads = serial4_pads,
.pads_cnt = ARRAY_SIZE(serial4_pads),
--
1.7.0.4
next reply other threads:[~2011-06-01 5:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-01 5:58 Govindraj.R [this message]
2011-06-01 7:13 ` [PATCH 1/3] OMAP2+: Fix debug section mistmatch warnings Tony Lindgren
2011-06-01 7:31 ` Govindraj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306907896-28789-1-git-send-email-govindraj.raja@ti.com \
--to=govindraj.raja@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=nskamat@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).