[PATCH 2/2] Remove old-style supply.dev assignments common in hsmmc init

[PATCH 2/2] Remove old-style supply.dev assignments common in hsmmc init

[green]

From: Oleg Drokin <green@linuxhacker.ru>

CC: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Mike Rapoport <mike@compulab.co.il>
CC: Nishant Kamat <nskamat@ti.com>
CC: Steve Sakoman <steve@sakoman.com>
CC: Felipe Balbi <balbi@ti.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
---
 arch/arm/mach-omap2/board-cm-t35.c           |    2 --
 arch/arm/mach-omap2/board-ldp.c              |    2 --
 arch/arm/mach-omap2/board-omap3beagle.c      |    4 ----
 arch/arm/mach-omap2/board-omap3evm.c         |    4 ----
 arch/arm/mach-omap2/board-omap3logic.c       |    2 --
 arch/arm/mach-omap2/board-omap3stalker.c     |    4 ----
 arch/arm/mach-omap2/board-omap3touchbook.c   |    4 ----
 arch/arm/mach-omap2/board-overo.c            |    2 --
 arch/arm/mach-omap2/board-zoom-peripherals.c |    7 -------
 9 files changed, 0 insertions(+), 31 deletions(-)

diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 33855e4..a38cd70 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -480,8 +480,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
 	omap2_hsmmc_init(mmc);
 
 	/* link regulators to MMC adapters */
-	cm_t35_vmmc1_supply.dev = mmc[0].dev;
-	cm_t35_vsim_supply.dev = mmc[0].dev;
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index f9b48fa..b519f2a 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -340,8 +340,6 @@ static void __init omap_ldp_init(void)
 		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
 
 	omap2_hsmmc_init(mmc);
-	/* link regulators to MMC adapters */
-	ldp_vmmc1_supply.dev = mmc[0].dev;
 }
 
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index f72279f..21e9df5 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -265,10 +265,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	beagle_vmmc1_supply.dev = mmc[0].dev;
-	beagle_vsim_supply.dev = mmc[0].dev;
-
 	/*
 	 * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
 	 * high / others active low)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 67d8a79..f648354 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -363,10 +363,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	omap3evm_vmmc1_supply.dev = mmc[0].dev;
-	omap3evm_vsim_supply.dev = mmc[0].dev;
-
 	/*
 	 * Most GPIOs are for USB OTG.  Some are mostly sent to
 	 * the P2 connector; notably LEDA for the LCD backlight.
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 4a37bf76f..8c0dd69 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -129,8 +129,6 @@ static void __init board_mmc_init(void)
 	}
 
 	omap2_hsmmc_init(board_mmc_info);
-	/* link regulators to MMC adapters */
-	omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev;
 }
 
 static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 3bf67ab..8e79df2 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -319,10 +319,6 @@ omap3stalker_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	omap3stalker_vmmc1_supply.dev = mmc[0].dev;
-	omap3stalker_vsim_supply.dev = mmc[0].dev;
-
 	/*
 	 * Most GPIOs are for USB OTG.  Some are mostly sent to
 	 * the P2 connector; notably LEDA for the LCD backlight.
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 27840e8..7c45659 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -135,10 +135,6 @@ static int touchbook_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	touchbook_vmmc1_supply.dev = mmc[0].dev;
-	touchbook_vsim_supply.dev = mmc[0].dev;
-
 	/* REVISIT: need ehci-omap hooks for external VBUS
 	 * power switch and overcurrent detect
 	 */
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index e6c6153..b87b8da 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -414,8 +414,6 @@ static int overo_twl_gpio_setup(struct device *dev,
 {
 	omap2_hsmmc_init(mmc);
 
-	overo_vmmc1_supply.dev = mmc[0].dev;
-
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index db77305..5591c3f 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -265,13 +265,6 @@ static int zoom_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters ... we "know" the
-	 * regulators will be set up only *after* we return.
-	*/
-	zoom_vmmc1_supply.dev = mmc[0].dev;
-	zoom_vsim_supply.dev = mmc[0].dev;
-	zoom_vmmc2_supply.dev = mmc[1].dev;
-
 	ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
 			       "lcd enable");
 	if (ret)
-- 
1.7.4.4

Re: [PATCH 2/2] Remove old-style supply.dev assignments common in hsmmc init

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 443 bytes --]

On Mon, Jun 06, 2011 at 02:46:02AM -0400, green@linuxhacker.ru wrote:
> From: Oleg Drokin <green@linuxhacker.ru>
> 
> CC: Mark Brown <broonie@opensource.wolfsonmicro.com>
> CC: Mike Rapoport <mike@compulab.co.il>
> CC: Nishant Kamat <nskamat@ti.com>
> CC: Steve Sakoman <steve@sakoman.com>
> CC: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Oleg Drokin <green@linuxhacker.ru>

Reviewed-by: Felipe Balbi <balbi@ti.com>

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

Re: [PATCH 2/2] Remove old-style supply.dev assignments common in hsmmc init

[Grazvydas Ignotas]

On Mon, Jun 6, 2011 at 9:46 AM,  <green@linuxhacker.ru> wrote:
> From: Oleg Drokin <green@linuxhacker.ru>
>
> CC: Mark Brown <broonie@opensource.wolfsonmicro.com>
> CC: Mike Rapoport <mike@compulab.co.il>
> CC: Nishant Kamat <nskamat@ti.com>
> CC: Steve Sakoman <steve@sakoman.com>
> CC: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
> ---
>  arch/arm/mach-omap2/board-cm-t35.c           |    2 --
>  arch/arm/mach-omap2/board-ldp.c              |    2 --
>  arch/arm/mach-omap2/board-omap3beagle.c      |    4 ----
>  arch/arm/mach-omap2/board-omap3evm.c         |    4 ----
>  arch/arm/mach-omap2/board-omap3logic.c       |    2 --
>  arch/arm/mach-omap2/board-omap3stalker.c     |    4 ----
>  arch/arm/mach-omap2/board-omap3touchbook.c   |    4 ----
>  arch/arm/mach-omap2/board-overo.c            |    2 --
>  arch/arm/mach-omap2/board-zoom-peripherals.c |    7 -------
>  9 files changed, 0 insertions(+), 31 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
> index 33855e4..a38cd70 100644
> --- a/arch/arm/mach-omap2/board-cm-t35.c
> +++ b/arch/arm/mach-omap2/board-cm-t35.c
> @@ -480,8 +480,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
>        omap2_hsmmc_init(mmc);
>
>        /* link regulators to MMC adapters */

Would be useful to remove this comment too.

> -       cm_t35_vmmc1_supply.dev = mmc[0].dev;
> -       cm_t35_vsim_supply.dev = mmc[0].dev;
>
>        return 0;
>  }
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Regulator cleanups in mach-omap2, take three

[green]

Hello!

  This is yet another attempt at some regulator cleanups in mach-omap2 code:
  Convert all users to REGULATOR_SUPPLY init style and drop the old-style
  .dev assignment common ins hs_mmc init.

  I made a test compile and all the individual board files changed compile
  (I don't have the devices themselves, but similar changes to my
   device board file are working).

  For the pandaboard changes - I am not sure what the proper names for those
  devices would be, so only converted the regulator to array.

  Big changes since v2:
  Per Felipe Balbi request converted all regulator supplies to arrays
  just in case.
  Also nuked an unneeded comment in cm-t35 board left after mmc.dev
  assignment removal.

[PATCH 1/2] cleanup regulator supply definitions in mach-omap2

[green]

From: Oleg Drokin <green@linuxhacker.ru>

to use REGULATOR_SUPPLY arrays.

CC: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Mike Rapoport <mike@compulab.co.il>
CC: Nishant Kamat <nskamat@ti.com>
CC: Steve Sakoman <steve@sakoman.com>
CC: Felipe Balbi <balbi@ti.com>
CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
CC: peter.barada@logicpd.com
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
---
 arch/arm/mach-omap2/board-4430sdp.c          |   13 ++----
 arch/arm/mach-omap2/board-cm-t35.c           |   34 +++++++-------
 arch/arm/mach-omap2/board-devkit8000.c       |   28 ++++++-----
 arch/arm/mach-omap2/board-igep0020.c         |   27 ++++++-----
 arch/arm/mach-omap2/board-ldp.c              |    8 ++--
 arch/arm/mach-omap2/board-omap3beagle.c      |   25 +++++-----
 arch/arm/mach-omap2/board-omap3evm.c         |   41 +++++++++--------
 arch/arm/mach-omap2/board-omap3logic.c       |    8 ++--
 arch/arm/mach-omap2/board-omap3pandora.c     |   63 ++++++++++++++-----------
 arch/arm/mach-omap2/board-omap3stalker.c     |   25 +++++-----
 arch/arm/mach-omap2/board-omap3touchbook.c   |   32 +++++++------
 arch/arm/mach-omap2/board-omap4panda.c       |   16 +++----
 arch/arm/mach-omap2/board-overo.c            |   26 ++++++-----
 arch/arm/mach-omap2/board-rx51-peripherals.c |   29 +++++++-----
 arch/arm/mach-omap2/board-zoom-peripherals.c |   42 +++++++++---------
 15 files changed, 218 insertions(+), 199 deletions(-)

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 63de2d3..39a8062 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -333,16 +333,11 @@ static struct omap2_hsmmc_info mmc[] = {
 };
 
 static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
-	{
-		.supply = "vmmc",
-		.dev_name = "omap_hsmmc.1",
-	},
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
 };
+
 static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
-	{
-		.supply = "vmmc",
-		.dev_name = "omap_hsmmc.0",
-	},
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
@@ -399,7 +394,7 @@ static struct regulator_init_data sdp4430_vaux1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
+	.num_consumer_supplies  = ARRAY_SIZE(sdp4430_vaux_supply),
 	.consumer_supplies      = sdp4430_vaux_supply,
 };
 
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 77456de..e7bf32d 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -337,19 +337,21 @@ static void __init cm_t35_init_display(void)
 	}
 }
 
-static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
-	.supply			= "vmmc",
+static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply cm_t35_vsim_supply = {
-	.supply			= "vmmc_aux",
+static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply cm_t35_vdac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
+static struct regulator_consumer_supply cm_t35_vdac_supply[] = {
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
+};
 
-static struct regulator_consumer_supply cm_t35_vdvi_supply =
-	REGULATOR_SUPPLY("vdvi", "omapdss");
+static struct regulator_consumer_supply cm_t35_vdvi_supply[] = {
+	REGULATOR_SUPPLY("vdvi", "omapdss"),
+};
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data cm_t35_vmmc1 = {
@@ -362,8 +364,8 @@ static struct regulator_init_data cm_t35_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &cm_t35_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(cm_t35_vmmc1_supply),
+	.consumer_supplies	= cm_t35_vmmc1_supply,
 };
 
 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
@@ -377,8 +379,8 @@ static struct regulator_init_data cm_t35_vsim = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &cm_t35_vsim_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(cm_t35_vsim_supply),
+	.consumer_supplies	= cm_t35_vsim_supply,
 };
 
 /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
@@ -391,8 +393,8 @@ static struct regulator_init_data cm_t35_vdac = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &cm_t35_vdac_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(cm_t35_vdac_supply),
+	.consumer_supplies	= cm_t35_vdac_supply,
 };
 
 /* VPLL2 for digital video outputs */
@@ -406,8 +408,8 @@ static struct regulator_init_data cm_t35_vpll2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &cm_t35_vdvi_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(cm_t35_vdvi_supply),
+	.consumer_supplies	= cm_t35_vdvi_supply,
 };
 
 static struct twl4030_usb_data cm_t35_usb_data = {
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 34956ec..ead9c1d 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -130,13 +130,14 @@ static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
 		gpio_set_value_cansleep(dssdev->reset_gpio, 0);
 }
 
-static struct regulator_consumer_supply devkit8000_vmmc1_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
-
+static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
 
 /* ads7846 on SPI */
-static struct regulator_consumer_supply devkit8000_vio_supply =
-	REGULATOR_SUPPLY("vcc", "spi2.0");
+static struct regulator_consumer_supply devkit8000_vio_supply[] = {
+	REGULATOR_SUPPLY("vcc", "spi2.0"),
+};
 
 static struct panel_generic_dpi_data lcd_panel = {
 	.name			= "generic",
@@ -186,8 +187,9 @@ static struct omap_dss_board_info devkit8000_dss_data = {
 	.default_device = &devkit8000_lcd_device,
 };
 
-static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
+static struct regulator_consumer_supply devkit8000_vdda_dac_supply[] = {
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
+};
 
 static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_1),
@@ -284,8 +286,8 @@ static struct regulator_init_data devkit8000_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &devkit8000_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vmmc1_supply),
+	.consumer_supplies	= devkit8000_vmmc1_supply,
 };
 
 /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
@@ -298,8 +300,8 @@ static struct regulator_init_data devkit8000_vdac = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &devkit8000_vdda_dac_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vdda_dac_supply),
+	.consumer_supplies	= devkit8000_vdda_dac_supply,
 };
 
 /* VPLL1 for digital video outputs */
@@ -327,8 +329,8 @@ static struct regulator_init_data devkit8000_vio = {
 		.valid_ops_mask         = REGULATOR_CHANGE_MODE
 			| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &devkit8000_vio_supply,
+	.num_consumer_supplies  = ARRAY_SIZE(devkit8000_vio_supply),
+	.consumer_supplies      = devkit8000_vio_supply,
 };
 
 static struct twl4030_usb_data devkit8000_usb_data = {
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 0c1bfca..84d2846 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -222,8 +222,9 @@ static inline void __init igep2_init_smsc911x(void)
 static inline void __init igep2_init_smsc911x(void) { }
 #endif
 
-static struct regulator_consumer_supply igep_vmmc1_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
+static struct regulator_consumer_supply igep_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
 
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 static struct regulator_init_data igep_vmmc1 = {
@@ -236,12 +237,13 @@ static struct regulator_init_data igep_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &igep_vmmc1_supply,
+	.num_consumer_supplies  = ARRAY_SIZE(igep_vmmc1_supply),
+	.consumer_supplies      = igep_vmmc1_supply,
 };
 
-static struct regulator_consumer_supply igep_vio_supply =
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1");
+static struct regulator_consumer_supply igep_vio_supply[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
+};
 
 static struct regulator_init_data igep_vio = {
 	.constraints = {
@@ -254,20 +256,21 @@ static struct regulator_init_data igep_vio = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &igep_vio_supply,
+	.num_consumer_supplies  = ARRAY_SIZE(igep_vio_supply),
+	.consumer_supplies      = igep_vio_supply,
 };
 
-static struct regulator_consumer_supply igep_vmmc2_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
+static struct regulator_consumer_supply igep_vmmc2_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
+};
 
 static struct regulator_init_data igep_vmmc2 = {
 	.constraints		= {
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
 		.always_on		= 1,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &igep_vmmc2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(igep_vmmc2_supply),
+	.consumer_supplies	= igep_vmmc2_supply,
 };
 
 static struct fixed_voltage_config igep_vwlan = {
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index f7d6038..069bc9f 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -213,8 +213,8 @@ static struct twl4030_madc_platform_data ldp_madc_data = {
 	.irq_line	= 1,
 };
 
-static struct regulator_consumer_supply ldp_vmmc1_supply = {
-	.supply			= "vmmc",
+static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -228,8 +228,8 @@ static struct regulator_init_data ldp_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &ldp_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(ldp_vmmc1_supply),
+	.consumer_supplies	= ldp_vmmc1_supply,
 };
 
 /* ads7846 on SPI */
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 7f21d24..4cf7c19 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -210,8 +210,9 @@ static struct omap_dss_board_info beagle_dss_data = {
 	.default_device = &beagle_dvi_device,
 };
 
-static struct regulator_consumer_supply beagle_vdac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
+static struct regulator_consumer_supply beagle_vdac_supply[] = {
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
+};
 
 static struct regulator_consumer_supply beagle_vdvi_supplies[] = {
 	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
@@ -239,12 +240,12 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply beagle_vmmc1_supply = {
-	.supply			= "vmmc",
+static struct regulator_consumer_supply beagle_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply beagle_vsim_supply = {
-	.supply			= "vmmc_aux",
+static struct regulator_consumer_supply beagle_vsim_supply[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
 
 static struct gpio_led gpio_leds[];
@@ -336,8 +337,8 @@ static struct regulator_init_data beagle_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &beagle_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(beagle_vmmc1_supply),
+	.consumer_supplies	= beagle_vmmc1_supply,
 };
 
 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
@@ -351,8 +352,8 @@ static struct regulator_init_data beagle_vsim = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &beagle_vsim_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(beagle_vsim_supply),
+	.consumer_supplies	= beagle_vsim_supply,
 };
 
 /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
@@ -365,8 +366,8 @@ static struct regulator_init_data beagle_vdac = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &beagle_vdac_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(beagle_vdac_supply),
+	.consumer_supplies	= beagle_vdac_supply,
 };
 
 /* VPLL2 for digital video outputs */
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b4d4346..fc7a23a 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -273,12 +273,12 @@ static struct omap_dss_board_info omap3_evm_dss_data = {
 	.default_device	= &omap3_evm_lcd_device,
 };
 
-static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
-	.supply			= "vmmc",
+static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply omap3evm_vsim_supply = {
-	.supply			= "vmmc_aux",
+static struct regulator_consumer_supply omap3evm_vsim_supply[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -292,8 +292,8 @@ static struct regulator_init_data omap3evm_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3evm_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vmmc1_supply),
+	.consumer_supplies	= omap3evm_vmmc1_supply,
 };
 
 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
@@ -307,8 +307,8 @@ static struct regulator_init_data omap3evm_vsim = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3evm_vsim_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vsim_supply),
+	.consumer_supplies	= omap3evm_vsim_supply,
 };
 
 static struct omap2_hsmmc_info mmc[] = {
@@ -449,8 +449,9 @@ static struct twl4030_codec_data omap3evm_codec_data = {
 	.audio = &omap3evm_audio_data,
 };
 
-static struct regulator_consumer_supply omap3_evm_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
+static struct regulator_consumer_supply omap3_evm_vdda_dac_supply[] = {
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
+};
 
 /* VDAC for DSS driving S-Video */
 static struct regulator_init_data omap3_evm_vdac = {
@@ -463,8 +464,8 @@ static struct regulator_init_data omap3_evm_vdac = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3_evm_vdda_dac_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3_evm_vdda_dac_supply),
+	.consumer_supplies	= omap3_evm_vdda_dac_supply,
 };
 
 /* VPLL2 for digital video outputs */
@@ -488,8 +489,9 @@ static struct regulator_init_data omap3_evm_vpll2 = {
 };
 
 /* ads7846 on SPI */
-static struct regulator_consumer_supply omap3evm_vio_supply =
-	REGULATOR_SUPPLY("vcc", "spi1.0");
+static struct regulator_consumer_supply omap3evm_vio_supply[] = {
+	REGULATOR_SUPPLY("vcc", "spi1.0"),
+};
 
 /* VIO for ads7846 */
 static struct regulator_init_data omap3evm_vio = {
@@ -502,8 +504,8 @@ static struct regulator_init_data omap3evm_vio = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3evm_vio_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vio_supply),
+	.consumer_supplies	= omap3evm_vio_supply,
 };
 
 #ifdef CONFIG_WL12XX_PLATFORM_DATA
@@ -511,16 +513,17 @@ static struct regulator_init_data omap3evm_vio = {
 #define OMAP3EVM_WLAN_PMENA_GPIO	(150)
 #define OMAP3EVM_WLAN_IRQ_GPIO		(149)
 
-static struct regulator_consumer_supply omap3evm_vmmc2_supply =
+static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
+};
 
 /* VMMC2 for driving the WL12xx module */
 static struct regulator_init_data omap3evm_vmmc2 = {
 	.constraints = {
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies = &omap3evm_vmmc2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vmmc2_supply);,
+	.consumer_supplies	= omap3evm_vmmc2_supply,
 };
 
 static struct fixed_voltage_config omap3evm_vwlan = {
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 60d9be4..ec18435 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -55,8 +55,8 @@
 #define OMAP3_TORPEDO_MMC_GPIO_CD		127
 #define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ		129
 
-static struct regulator_consumer_supply omap3logic_vmmc1_supply = {
-	.supply			= "vmmc",
+static struct regulator_consumer_supply omap3logic_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -71,8 +71,8 @@ static struct regulator_init_data omap3logic_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &omap3logic_vmmc1_supply,
+	.num_consumer_supplies  = ARRAY_SIZE(omap3logic_vmmc1_supply),
+	.consumer_supplies      = omap3logic_vmmc1_supply,
 };
 
 static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 2a0bb48..e95bba2 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -319,17 +319,21 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
 	.setup		= omap3pandora_twl_gpio_setup,
 };
 
-static struct regulator_consumer_supply pandora_vmmc1_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
+static struct regulator_consumer_supply pandora_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
 
-static struct regulator_consumer_supply pandora_vmmc2_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
+static struct regulator_consumer_supply pandora_vmmc2_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1")
+};
 
-static struct regulator_consumer_supply pandora_vmmc3_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2");
+static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
+};
 
-static struct regulator_consumer_supply pandora_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
+static struct regulator_consumer_supply pandora_vdda_dac_supply[] = {
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
+};
 
 static struct regulator_consumer_supply pandora_vdds_supplies[] = {
 	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
@@ -337,11 +341,13 @@ static struct regulator_consumer_supply pandora_vdds_supplies[] = {
 	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
 };
 
-static struct regulator_consumer_supply pandora_vcc_lcd_supply =
-	REGULATOR_SUPPLY("vcc", "display0");
+static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
+	REGULATOR_SUPPLY("vcc", "display0"),
+};
 
-static struct regulator_consumer_supply pandora_usb_phy_supply =
-	REGULATOR_SUPPLY("hsusb0", "ehci-omap.0");
+static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
+	REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"),
+};
 
 /* ads7846 on SPI and 2 nub controllers on I2C */
 static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
@@ -350,8 +356,9 @@ static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
 	REGULATOR_SUPPLY("vcc", "3-0067"),
 };
 
-static struct regulator_consumer_supply pandora_adac_supply =
-	REGULATOR_SUPPLY("vcc", "soc-audio");
+static struct regulator_consumer_supply pandora_adac_supply[] = {
+	REGULATOR_SUPPLY("vcc", "soc-audio"),
+};
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data pandora_vmmc1 = {
@@ -364,8 +371,8 @@ static struct regulator_init_data pandora_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &pandora_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc1_supply),
+	.consumer_supplies	= pandora_vmmc1_supply,
 };
 
 /* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
@@ -379,8 +386,8 @@ static struct regulator_init_data pandora_vmmc2 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &pandora_vmmc2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc2_supply),
+	.consumer_supplies	= pandora_vmmc2_supply,
 };
 
 /* VDAC for DSS driving S-Video */
@@ -394,8 +401,8 @@ static struct regulator_init_data pandora_vdac = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &pandora_vdda_dac_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vdda_dac_supply),
+	.consumer_supplies	= pandora_vdda_dac_supply,
 };
 
 /* VPLL2 for digital video outputs */
@@ -424,8 +431,8 @@ static struct regulator_init_data pandora_vaux1 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &pandora_vcc_lcd_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vcc_lcd_supply),
+	.consumer_supplies	= pandora_vcc_lcd_supply,
 };
 
 /* VAUX2 for USB host PHY */
@@ -439,8 +446,8 @@ static struct regulator_init_data pandora_vaux2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &pandora_usb_phy_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_usb_phy_supply),
+	.consumer_supplies	= pandora_usb_phy_supply,
 };
 
 /* VAUX4 for ads7846 and nubs */
@@ -469,8 +476,8 @@ static struct regulator_init_data pandora_vsim = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &pandora_adac_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_adac_supply),
+	.consumer_supplies	= pandora_adac_supply,
 };
 
 /* Fixed regulator internal to Wifi module */
@@ -478,8 +485,8 @@ static struct regulator_init_data pandora_vmmc3 = {
 	.constraints = {
 		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &pandora_vmmc3_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc3_supply),
+	.consumer_supplies	= pandora_vmmc3_supply,
 };
 
 static struct fixed_voltage_config pandora_vwlan = {
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 0c108a2..99be540 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -206,12 +206,12 @@ static struct omap_dss_board_info omap3_stalker_dss_data = {
 	.default_device	= &omap3_stalker_dvi_device,
 };
 
-static struct regulator_consumer_supply omap3stalker_vmmc1_supply = {
-	.supply		= "vmmc",
+static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply omap3stalker_vsim_supply = {
-	.supply		= "vmmc_aux",
+static struct regulator_consumer_supply omap3stalker_vsim_supply[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -224,8 +224,8 @@ static struct regulator_init_data omap3stalker_vmmc1 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
 		| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3stalker_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3stalker_vmmc1_supply),
+	.consumer_supplies	= omap3stalker_vmmc1_supply,
 };
 
 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
@@ -238,8 +238,8 @@ static struct regulator_init_data omap3stalker_vsim = {
 		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
 		| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3stalker_vsim_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3stalker_vsim_supply),
+	.consumer_supplies	= omap3stalker_vsim_supply,
 };
 
 static struct omap2_hsmmc_info mmc[] = {
@@ -403,8 +403,9 @@ static struct twl4030_codec_data omap3stalker_codec_data = {
 	.audio		= &omap3stalker_audio_data,
 };
 
-static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
+static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply[] = {
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
+};
 
 /* VDAC for DSS driving S-Video */
 static struct regulator_init_data omap3_stalker_vdac = {
@@ -417,8 +418,8 @@ static struct regulator_init_data omap3_stalker_vdac = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 		| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3_stalker_vdda_dac_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3_stalker_vdda_dac_supply),
+	.consumer_supplies	= omap3_stalker_vdda_dac_supply,
 };
 
 /* VPLL2 for digital video outputs */
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 5f649fa..ab5c37d 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -114,12 +114,12 @@ static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct regulator_consumer_supply touchbook_vmmc1_supply = {
-	.supply			= "vmmc",
+static struct regulator_consumer_supply touchbook_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply touchbook_vsim_supply = {
-	.supply			= "vmmc_aux",
+static struct regulator_consumer_supply touchbook_vsim_supply[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
 
 static struct gpio_led gpio_leds[];
@@ -167,14 +167,18 @@ static struct twl4030_gpio_platform_data touchbook_gpio_data = {
 	.setup		= touchbook_twl_gpio_setup,
 };
 
-static struct regulator_consumer_supply touchbook_vdac_supply = {
+static struct regulator_consumer_supply touchbook_vdac_supply[] = {
+{
 	.supply		= "vdac",
 	.dev		= &omap3_touchbook_lcd_device.dev,
+},
 };
 
-static struct regulator_consumer_supply touchbook_vdvi_supply = {
+static struct regulator_consumer_supply touchbook_vdvi_supply[] = {
+{
 	.supply		= "vdvi",
 	.dev		= &omap3_touchbook_lcd_device.dev,
+},
 };
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -188,8 +192,8 @@ static struct regulator_init_data touchbook_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &touchbook_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(touchbook_vmmc1_supply),
+	.consumer_supplies	= touchbook_vmmc1_supply,
 };
 
 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
@@ -203,8 +207,8 @@ static struct regulator_init_data touchbook_vsim = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &touchbook_vsim_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(touchbook_vsim_supply),
+	.consumer_supplies	= touchbook_vsim_supply,
 };
 
 /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
@@ -217,8 +221,8 @@ static struct regulator_init_data touchbook_vdac = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &touchbook_vdac_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(touchbook_vdac_supply),
+	.consumer_supplies	= touchbook_vdac_supply,
 };
 
 /* VPLL2 for digital video outputs */
@@ -232,8 +236,8 @@ static struct regulator_init_data touchbook_vpll2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &touchbook_vdvi_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(touchbook_vdvi_supply),
+	.consumer_supplies	= touchbook_vdvi_supply,
 };
 
 static struct twl4030_usb_data touchbook_usb_data = {
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 0cfe200..6d2372b 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -183,23 +183,19 @@ static struct omap2_hsmmc_info mmc[] = {
 };
 
 static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
-	{
-		.supply = "vmmc",
-		.dev_name = "omap_hsmmc.0",
-	},
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply omap4_panda_vmmc5_supply = {
-	.supply = "vmmc",
-	.dev_name = "omap_hsmmc.4",
+static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"),
 };
 
 static struct regulator_init_data panda_vmmc5 = {
 	.constraints = {
 		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &omap4_panda_vmmc5_supply,
+	.num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc5_supply),
+	.consumer_supplies = omap4_panda_vmmc5_supply,
 };
 
 static struct fixed_voltage_config panda_vwlan = {
@@ -312,7 +308,7 @@ static struct regulator_init_data omap4_panda_vmmc = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
+	.num_consumer_supplies  = ARRAY_SIZE(omap4_panda_vmmc_supply),
 	.consumer_supplies      = omap4_panda_vmmc_supply,
 };
 
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 175e1ab..30c7556 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -74,15 +74,16 @@
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
 /* fixed regulator for ads7846 */
-static struct regulator_consumer_supply ads7846_supply =
-	REGULATOR_SUPPLY("vcc", "spi1.0");
+static struct regulator_consumer_supply ads7846_supply[] = {
+	REGULATOR_SUPPLY("vcc", "spi1.0"),
+};
 
 static struct regulator_init_data vads7846_regulator = {
 	.constraints = {
 		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &ads7846_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(ads7846_supply),
+	.consumer_supplies	= ads7846_supply,
 };
 
 static struct fixed_voltage_config vads7846 = {
@@ -264,8 +265,9 @@ static struct omap_dss_board_info overo_dss_data = {
 	.default_device	= &overo_dvi_device,
 };
 
-static struct regulator_consumer_supply overo_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
+static struct regulator_consumer_supply overo_vdda_dac_supply[] = {
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
+};
 
 static struct regulator_consumer_supply overo_vdds_dsi_supply[] = {
 	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
@@ -319,8 +321,8 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply overo_vmmc1_supply = {
-	.supply			= "vmmc",
+static struct regulator_consumer_supply overo_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
@@ -447,8 +449,8 @@ static struct regulator_init_data overo_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &overo_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(overo_vmmc1_supply),
+	.consumer_supplies	= overo_vmmc1_supply,
 };
 
 /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
@@ -461,8 +463,8 @@ static struct regulator_init_data overo_vdac = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &overo_vdda_dac_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(overo_vdda_dac_supply),
+	.consumer_supplies	= overo_vdda_dac_supply,
 };
 
 /* VPLL2 for digital video outputs */
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 9903667..5e559dd 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -358,14 +358,17 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply rx51_vmmc1_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
+static struct regulator_consumer_supply rx51_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
 
-static struct regulator_consumer_supply rx51_vaux3_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
+static struct regulator_consumer_supply rx51_vaux3_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
+};
 
-static struct regulator_consumer_supply rx51_vsim_supply =
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1");
+static struct regulator_consumer_supply rx51_vsim_supply[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
+};
 
 static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
 	/* tlv320aic3x analog supplies */
@@ -452,8 +455,8 @@ static struct regulator_init_data rx51_vaux3_mmc = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &rx51_vaux3_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux3_supply),
+	.consumer_supplies	= rx51_vaux3_supply,
 };
 
 static struct regulator_init_data rx51_vaux4 = {
@@ -479,8 +482,8 @@ static struct regulator_init_data rx51_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &rx51_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vmmc1_supply),
+	.consumer_supplies	= rx51_vmmc1_supply,
 };
 
 static struct regulator_init_data rx51_vmmc2 = {
@@ -511,8 +514,8 @@ static struct regulator_init_data rx51_vsim = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &rx51_vsim_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vsim_supply),
+	.consumer_supplies	= rx51_vsim_supply,
 };
 
 static struct regulator_init_data rx51_vdac = {
@@ -526,7 +529,7 @@ static struct regulator_init_data rx51_vdac = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vdac_supply),
 	.consumer_supplies	= rx51_vdac_supply,
 };
 
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 118c6f5..cb012e1 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -105,21 +105,20 @@ static struct twl4030_keypad_data zoom_kp_twl4030_data = {
 	.rep		= 1,
 };
 
-static struct regulator_consumer_supply zoom_vmmc1_supply = {
-	.supply		= "vmmc",
+static struct regulator_consumer_supply zoom_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply zoom_vsim_supply = {
-	.supply		= "vmmc_aux",
+static struct regulator_consumer_supply zoom_vsim_supply[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply zoom_vmmc2_supply = {
-	.supply		= "vmmc",
+static struct regulator_consumer_supply zoom_vmmc2_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
 };
 
-static struct regulator_consumer_supply zoom_vmmc3_supply = {
-	.supply		= "vmmc",
-	.dev_name	= "omap_hsmmc.2",
+static struct regulator_consumer_supply zoom_vmmc3_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
 };
 
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
@@ -133,8 +132,8 @@ static struct regulator_init_data zoom_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom_vmmc1_supply,
+	.num_consumer_supplies  = ARRAY_SIZE(zoom_vmmc1_supply),
+	.consumer_supplies      = zoom_vmmc1_supply,
 };
 
 /* VMMC2 for MMC2 card */
@@ -148,8 +147,8 @@ static struct regulator_init_data zoom_vmmc2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom_vmmc2_supply,
+	.num_consumer_supplies  = ARRAY_SIZE(zoom_vmmc2_supply),
+	.consumer_supplies      = zoom_vmmc2_supply,
 };
 
 /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
@@ -163,16 +162,16 @@ static struct regulator_init_data zoom_vsim = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom_vsim_supply,
+	.num_consumer_supplies  = ARRAY_SIZE(zoom_vsim_supply),
+	.consumer_supplies      = zoom_vsim_supply,
 };
 
 static struct regulator_init_data zoom_vmmc3 = {
 	.constraints = {
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies = &zoom_vmmc3_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(zoom_vmmc3_supply),
+	.consumer_supplies	= zoom_vmmc3_supply,
 };
 
 static struct fixed_voltage_config zoom_vwlan = {
@@ -232,8 +231,9 @@ static struct regulator_consumer_supply zoom_vpll2_supplies[] = {
 	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
 };
 
-static struct regulator_consumer_supply zoom_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
+static struct regulator_consumer_supply zoom_vdda_dac_supply[] = {
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
+};
 
 static struct regulator_init_data zoom_vpll2 = {
 	.constraints = {
@@ -257,8 +257,8 @@ static struct regulator_init_data zoom_vdac = {
 		.valid_ops_mask         = REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies		= 1,
-	.consumer_supplies		= &zoom_vdda_dac_supply,
+	.num_consumer_supplies		= ARRAY_SIZE(zoom_vdda_dac_supply),
+	.consumer_supplies		= zoom_vdda_dac_supply,
 };
 
 static int zoom_twl_gpio_setup(struct device *dev,
-- 
1.7.4.4

[PATCH 2/2] Remove old-style supply.dev assignments common in hsmmc init

[green]

From: Oleg Drokin <green@linuxhacker.ru>

CC: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Mike Rapoport <mike@compulab.co.il>
CC: Nishant Kamat <nskamat@ti.com>
CC: Steve Sakoman <steve@sakoman.com>
CC: Felipe Balbi <balbi@ti.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
---
 arch/arm/mach-omap2/board-cm-t35.c           |    4 ----
 arch/arm/mach-omap2/board-ldp.c              |    2 --
 arch/arm/mach-omap2/board-omap3beagle.c      |    4 ----
 arch/arm/mach-omap2/board-omap3evm.c         |    4 ----
 arch/arm/mach-omap2/board-omap3logic.c       |    2 --
 arch/arm/mach-omap2/board-omap3stalker.c     |    4 ----
 arch/arm/mach-omap2/board-omap3touchbook.c   |    4 ----
 arch/arm/mach-omap2/board-overo.c            |    2 --
 arch/arm/mach-omap2/board-zoom-peripherals.c |    7 -------
 9 files changed, 0 insertions(+), 33 deletions(-)

diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index e7bf32d..ceb581e 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -483,10 +483,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	cm_t35_vmmc1_supply.dev = mmc[0].dev;
-	cm_t35_vsim_supply.dev = mmc[0].dev;
-
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 069bc9f..2d7e0ae 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -341,8 +341,6 @@ static void __init omap_ldp_init(void)
 		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
 
 	omap2_hsmmc_init(mmc);
-	/* link regulators to MMC adapters */
-	ldp_vmmc1_supply.dev = mmc[0].dev;
 }
 
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 4cf7c19..8ef0e19 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -268,10 +268,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	beagle_vmmc1_supply.dev = mmc[0].dev;
-	beagle_vsim_supply.dev = mmc[0].dev;
-
 	/*
 	 * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
 	 * high / others active low)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index fc7a23a..e2202dd 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -365,10 +365,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	omap3evm_vmmc1_supply.dev = mmc[0].dev;
-	omap3evm_vsim_supply.dev = mmc[0].dev;
-
 	/*
 	 * Most GPIOs are for USB OTG.  Some are mostly sent to
 	 * the P2 connector; notably LEDA for the LCD backlight.
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index ec18435..eaefb59 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -130,8 +130,6 @@ static void __init board_mmc_init(void)
 	}
 
 	omap2_hsmmc_init(board_mmc_info);
-	/* link regulators to MMC adapters */
-	omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev;
 }
 
 static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 99be540..63d12a3 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -321,10 +321,6 @@ omap3stalker_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	omap3stalker_vmmc1_supply.dev = mmc[0].dev;
-	omap3stalker_vsim_supply.dev = mmc[0].dev;
-
 	/*
 	 * Most GPIOs are for USB OTG.  Some are mostly sent to
 	 * the P2 connector; notably LEDA for the LCD backlight.
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index ab5c37d..c80e2c3 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -137,10 +137,6 @@ static int touchbook_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	touchbook_vmmc1_supply.dev = mmc[0].dev;
-	touchbook_vsim_supply.dev = mmc[0].dev;
-
 	/* REVISIT: need ehci-omap hooks for external VBUS
 	 * power switch and overcurrent detect
 	 */
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 30c7556..031a9a6 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -417,8 +417,6 @@ static int overo_twl_gpio_setup(struct device *dev,
 {
 	omap2_hsmmc_init(mmc);
 
-	overo_vmmc1_supply.dev = mmc[0].dev;
-
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index cb012e1..8495f82 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -270,13 +270,6 @@ static int zoom_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters ... we "know" the
-	 * regulators will be set up only *after* we return.
-	*/
-	zoom_vmmc1_supply.dev = mmc[0].dev;
-	zoom_vsim_supply.dev = mmc[0].dev;
-	zoom_vmmc2_supply.dev = mmc[1].dev;
-
 	ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
 			       "lcd enable");
 	if (ret)
-- 
1.7.4.4

Re: [PATCH 1/2] cleanup regulator supply definitions in mach-omap2

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 645 bytes --]

On Mon, Jun 06, 2011 at 02:57:07PM -0400, green@linuxhacker.ru wrote:
> From: Oleg Drokin <green@linuxhacker.ru>
> 
> to use REGULATOR_SUPPLY arrays.
> 
> CC: Mark Brown <broonie@opensource.wolfsonmicro.com>
> CC: Mike Rapoport <mike@compulab.co.il>
> CC: Nishant Kamat <nskamat@ti.com>
> CC: Steve Sakoman <steve@sakoman.com>
> CC: Felipe Balbi <balbi@ti.com>
> CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
> CC: peter.barada@logicpd.com
> Signed-off-by: Oleg Drokin <green@linuxhacker.ru>

Acked-by: Felipe Balbi <balbi@ti.com>

I also compile tested with omap2plus_defconfig against 3.0-rc2 and it's
fine.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

Re: [PATCH 2/2] Remove old-style supply.dev assignments common in hsmmc init

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 484 bytes --]

On Mon, Jun 06, 2011 at 02:57:08PM -0400, green@linuxhacker.ru wrote:
> From: Oleg Drokin <green@linuxhacker.ru>
> 
> CC: Mark Brown <broonie@opensource.wolfsonmicro.com>
> CC: Mike Rapoport <mike@compulab.co.il>
> CC: Nishant Kamat <nskamat@ti.com>
> CC: Steve Sakoman <steve@sakoman.com>
> CC: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Oleg Drokin <green@linuxhacker.ru>

Acked-by: Felipe Balbi <balbi@ti.com>

compile tested with omap2plus_defconfig.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

Re: Regulator cleanups in mach-omap2, take three

[Tony Lindgren]

* green@linuxhacker.ru <green@linuxhacker.ru> [110606 11:54]:
> Hello!
> 
>   This is yet another attempt at some regulator cleanups in mach-omap2 code:
>   Convert all users to REGULATOR_SUPPLY init style and drop the old-style
>   .dev assignment common ins hs_mmc init.
> 
>   I made a test compile and all the individual board files changed compile
>   (I don't have the devices themselves, but similar changes to my
>    device board file are working).
> 
>   For the pandaboard changes - I am not sure what the proper names for those
>   devices would be, so only converted the regulator to array.
> 
>   Big changes since v2:
>   Per Felipe Balbi request converted all regulator supplies to arrays
>   just in case.
>   Also nuked an unneeded comment in cm-t35 board left after mmc.dev
>   assignment removal.

Thanks, applying to devel-cleanup branch for next merge window.

Tony