[PATCH 1/2] omap2+: pm: Use if...else instead of goto

[Sanjeev Premi <premi@ti.com>]

This patch replaces the use of goto with simple
if...else syntax. No change in functionality.

This also means that the comment describing the
dependency between CONFIG_SMP and calculation
of loops_per_jiffy can be unified.

Signed-off-by: Sanjeev Premi <premi@ti.com>
---
 arch/arm/mach-omap2/omap2plus-cpufreq.c |   59 +++++++++++++-----------------
 1 files changed, 26 insertions(+), 33 deletions(-)

diff --git a/arch/arm/mach-omap2/omap2plus-cpufreq.c b/arch/arm/mach-omap2/omap2plus-cpufreq.c
index 1f3b2e1..ce9d534 100644
--- a/arch/arm/mach-omap2/omap2plus-cpufreq.c
+++ b/arch/arm/mach-omap2/omap2plus-cpufreq.c
@@ -96,57 +96,50 @@ static int omap_target(struct cpufreq_policy *policy,
 	if (freqs.old == freqs.new && policy->cur == freqs.new)
 		return ret;
 
-	if (!is_smp()) {
-		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-		goto set_freq;
-	}
-
-	/* notifiers */
-	for_each_cpu(i, policy->cpus) {
-		freqs.cpu = i;
+	/* Notify transitions */
+	if (is_smp()) {
+		for_each_cpu(i, policy->cpus) {
+			freqs.cpu = i;
+			cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+		}
+	} else {
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
 
-set_freq:
 #ifdef CONFIG_CPU_FREQ_DEBUG
 	pr_info("cpufreq-omap: transition: %u --> %u\n", freqs.old, freqs.new);
 #endif
 
 	ret = clk_set_rate(mpu_clk, freqs.new * 1000);
 
-	/*
-	 * Generic CPUFREQ driver jiffy update is under !SMP. So jiffies
-	 * won't get updated when UP machine cpufreq build with
-	 * CONFIG_SMP enabled. Below code is added only to manage that
-	 * scenario
-	 */
 	freqs.new = omap_getspeed(policy->cpu);
-	if (!is_smp()) {
-		loops_per_jiffy =
-			 cpufreq_scale(loops_per_jiffy, freqs.old, freqs.new);
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-		goto skip_lpj;
-	}
 
-#ifdef CONFIG_SMP
 	/*
-	 * Note that loops_per_jiffy is not updated on SMP systems in
-	 * cpufreq driver. So, update the per-CPU loops_per_jiffy value
-	 * on frequency transition. We need to update all dependent CPUs.
+	 * In the generic cpufreq driver jiffies are updated only for
+	 * non-SMP cases. Ensure that jiffies are bing updated for both
+	 * SMP systems and UP systems built with CONFIG_SMP enabled.
 	 */
-	for_each_cpu(i, policy->cpus)
-		per_cpu(cpu_data, i).loops_per_jiffy =
-			cpufreq_scale(per_cpu(cpu_data, i).loops_per_jiffy,
-					freqs.old, freqs.new);
+	if (is_smp()) {
+#ifdef CONFIG_SMP
+		for_each_cpu(i, policy->cpus)
+			per_cpu(cpu_data, i).loops_per_jiffy =
+				cpufreq_scale(per_cpu(cpu_data, i).loops_per_jiffy,
+						freqs.old,
+						freqs.new);
 #endif
+		/* Notify transitions */
+		for_each_cpu(i, policy->cpus) {
+			freqs.cpu = i;
+			cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+		}
+	} else {
+		loops_per_jiffy = cpufreq_scale(loops_per_jiffy,
+					freqs.old, freqs.new);
 
-	/* notifiers */
-	for_each_cpu(i, policy->cpus) {
-		freqs.cpu = i;
+		/* Notify transitions */
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
 
-skip_lpj:
 	return ret;
 }
 
-- 
1.7.2.2