From: Kevin Hilman <khilman@ti.com>
To: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/22] OMAP3: powerdomain data: add voltage domains
Date: Mon, 29 Aug 2011 10:35:43 -0700 [thread overview]
Message-ID: <1314639355-12713-11-git-send-email-khilman@ti.com> (raw)
In-Reply-To: <1314639355-12713-1-git-send-email-khilman@ti.com>
Add voltage domain name to indicate which voltagedomain each
powerdomain is in.
Signed-off-by: Kevin Hilman <khilman@ti.com>
---
arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c | 2 ++
arch/arm/mach-omap2/powerdomains3xxx_data.c | 16 ++++++++++++++++
2 files changed, 18 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
index 4210c33..2242c8e 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
@@ -70,6 +70,7 @@ struct powerdomain gfx_omap2_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
struct powerdomain wkup_omap2_pwrdm = {
@@ -77,4 +78,5 @@ struct powerdomain wkup_omap2_pwrdm = {
.prcm_offs = WKUP_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_ON,
+ .voltdm = { .name = "wakeup" },
};
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index 469a920..1f37c0c 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -52,6 +52,7 @@ static struct powerdomain iva2_pwrdm = {
[2] = PWRSTS_OFF_ON,
[3] = PWRSTS_ON,
},
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain mpu_3xxx_pwrdm = {
@@ -68,6 +69,7 @@ static struct powerdomain mpu_3xxx_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRSTS_OFF_ON,
},
+ .voltdm = { .name = "mpu_iva" },
};
/*
@@ -98,6 +100,7 @@ static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain core_3xxx_es3_1_pwrdm = {
@@ -121,6 +124,7 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = {
[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain dss_pwrdm = {
@@ -136,6 +140,7 @@ static struct powerdomain dss_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
/*
@@ -157,6 +162,7 @@ static struct powerdomain sgx_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain cam_pwrdm = {
@@ -172,6 +178,7 @@ static struct powerdomain cam_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain per_pwrdm = {
@@ -187,12 +194,14 @@ static struct powerdomain per_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain emu_pwrdm = {
.name = "emu_pwrdm",
.prcm_offs = OMAP3430_EMU_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "core" },
};
static struct powerdomain neon_pwrdm = {
@@ -201,6 +210,7 @@ static struct powerdomain neon_pwrdm = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain usbhost_pwrdm = {
@@ -223,36 +233,42 @@ static struct powerdomain usbhost_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain dpll1_pwrdm = {
.name = "dpll1_pwrdm",
.prcm_offs = MPU_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain dpll2_pwrdm = {
.name = "dpll2_pwrdm",
.prcm_offs = OMAP3430_IVA2_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain dpll3_pwrdm = {
.name = "dpll3_pwrdm",
.prcm_offs = PLL_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "core" },
};
static struct powerdomain dpll4_pwrdm = {
.name = "dpll4_pwrdm",
.prcm_offs = PLL_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "core" },
};
static struct powerdomain dpll5_pwrdm = {
.name = "dpll5_pwrdm",
.prcm_offs = PLL_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
+ .voltdm = { .name = "core" },
};
/* As powerdomains are added or removed above, this list must also be changed */
--
1.7.6
next prev parent reply other threads:[~2011-08-29 17:35 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-29 17:35 [PATCH 00/22] OMAP: voltage cleanup part A Kevin Hilman
2011-08-29 17:35 ` [PATCH 01/22] OMAP2+: hwmod: remove unused voltagedomain pointer Kevin Hilman
2011-08-29 17:35 ` [PATCH 02/22] OMAP2+: voltage: move PRCM mod offets into VC/VP structures Kevin Hilman
2011-08-29 17:35 ` [PATCH 03/22] OMAP2+: voltage: move prm_irqst_reg from VP into voltage domain Kevin Hilman
2011-08-29 17:35 ` [PATCH 04/22] OMAP2+: voltage: start towards a new voltagedomain layer Kevin Hilman
2011-08-29 17:35 ` [PATCH 05/22] OMAP3: voltage: rename "mpu" voltagedomain to "mpu_iva" Kevin Hilman
2011-08-29 17:35 ` [PATCH 06/22] OMAP3: voltagedomain data: add wakeup domain Kevin Hilman
2011-08-29 17:35 ` [PATCH 07/22] OMAP3+: voltage: add scalable flag to voltagedomain Kevin Hilman
2011-08-29 17:35 ` [PATCH 08/22] OMAP2+: powerdomain: add voltagedomain to struct powerdomain Kevin Hilman
2011-08-29 17:35 ` [PATCH 09/22] OMAP2: add voltage domains and connect to powerdomains Kevin Hilman
2011-09-07 10:39 ` Jean Pihet
2011-09-09 21:41 ` Kevin Hilman
2011-09-09 21:46 ` Kevin Hilman
2011-08-29 17:35 ` Kevin Hilman [this message]
2011-08-29 17:35 ` [PATCH 11/22] OMAP4: powerdomain data: add voltage domains Kevin Hilman
2011-09-07 9:04 ` Jean Pihet
2011-09-09 21:48 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 12/22] OMAP2+: powerdomain: add voltage domain lookup during register Kevin Hilman
2011-08-29 17:35 ` [PATCH 13/22] OMAP2+: voltage: keep track of powerdomains in each voltagedomain Kevin Hilman
2011-09-07 9:23 ` Jean Pihet
2011-09-09 21:52 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 14/22] OMAP2+: voltage: split voltage controller (VC) code into dedicated layer Kevin Hilman
2011-09-07 10:42 ` Jean Pihet
2011-09-09 21:51 ` Kevin Hilman
2011-08-29 17:35 ` [PATCH 15/22] OMAP2+: voltage: move VC into struct voltagedomain, misc. renames Kevin Hilman
2011-08-29 17:35 ` [PATCH 16/22] OMAP2+: voltage: enable VC bypass scale method when VC is initialized Kevin Hilman
2011-08-29 17:35 ` [PATCH 17/22] OMAP2+: voltage: split out voltage processor (VP) code into new layer Kevin Hilman
2011-09-07 9:52 ` Jean Pihet
2011-08-29 17:35 ` [PATCH 18/22] OMAP2+: VC: support PMICs with separate voltage and command registers Kevin Hilman
2011-08-29 17:35 ` [PATCH 19/22] OMAP2+: add PRM VP functions for checking/clearing VP TX done status Kevin Hilman
2011-08-29 17:35 ` [PATCH 20/22] OMAP3+ VP: replace transaction done check/clear with VP ops Kevin Hilman
2011-08-29 17:35 ` [PATCH 21/22] OMAP2+: PRM: add register access functions for VC/VP Kevin Hilman
2011-08-29 17:35 ` [PATCH 22/22] OMAP3+: voltage: convert to PRM register access functions Kevin Hilman
2011-09-07 19:12 ` [PATCH 00/22] OMAP: voltage cleanup part A Jean Pihet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314639355-12713-11-git-send-email-khilman@ti.com \
--to=khilman@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).