From: Archit Taneja <archit@ti.com>
To: tomi.valkeinen@ti.com
Cc: linux-omap@vger.kernel.org, Archit Taneja <archit@ti.com>
Subject: [PATCH 01/10] OMAP: DSS2: Use MIPI DSI transacition types and commands from include/video/mipi_display.h
Date: Tue, 30 Aug 2011 16:21:26 +0530 [thread overview]
Message-ID: <1314701495-11247-2-git-send-email-archit@ti.com> (raw)
In-Reply-To: <1314701495-11247-1-git-send-email-archit@ti.com>
MIPI DSI Transaction types and DCS commands are currently defined as macros in
dsi.c and panel-taal.c, remove these and replace them with enum members defined
in include/video/mipi_display.h.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/displays/panel-taal.c | 45 +++++++++-----------------
drivers/video/omap2/dss/dsi.c | 48 +++++++++++-----------------
2 files changed, 35 insertions(+), 58 deletions(-)
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 4e888ac..7675687 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -35,26 +35,12 @@
#include <video/omapdss.h>
#include <video/omap-panel-nokia-dsi.h>
+#include <video/mipi_display.h>
/* DSI Virtual channel. Hardcoded for now. */
#define TCH 0
#define DCS_READ_NUM_ERRORS 0x05
-#define DCS_READ_POWER_MODE 0x0a
-#define DCS_READ_MADCTL 0x0b
-#define DCS_READ_PIXEL_FORMAT 0x0c
-#define DCS_RDDSDR 0x0f
-#define DCS_SLEEP_IN 0x10
-#define DCS_SLEEP_OUT 0x11
-#define DCS_DISPLAY_OFF 0x28
-#define DCS_DISPLAY_ON 0x29
-#define DCS_COLUMN_ADDR 0x2a
-#define DCS_PAGE_ADDR 0x2b
-#define DCS_MEMORY_WRITE 0x2c
-#define DCS_TEAR_OFF 0x34
-#define DCS_TEAR_ON 0x35
-#define DCS_MEM_ACC_CTRL 0x36
-#define DCS_PIXEL_FORMAT 0x3a
#define DCS_BRIGHTNESS 0x51
#define DCS_CTRL_DISPLAY 0x53
#define DCS_WRITE_CABC 0x55
@@ -302,7 +288,7 @@ static int taal_sleep_in(struct taal_data *td)
hw_guard_wait(td);
- cmd = DCS_SLEEP_IN;
+ cmd = MIPI_DCS_ENTER_SLEEP_MODE;
r = dsi_vc_dcs_write_nosync(td->dssdev, td->channel, &cmd, 1);
if (r)
return r;
@@ -321,7 +307,7 @@ static int taal_sleep_out(struct taal_data *td)
hw_guard_wait(td);
- r = taal_dcs_write_0(td, DCS_SLEEP_OUT);
+ r = taal_dcs_write_0(td, MIPI_DCS_EXIT_SLEEP_MODE);
if (r)
return r;
@@ -356,7 +342,7 @@ static int taal_set_addr_mode(struct taal_data *td, u8 rotate, bool mirror)
u8 mode;
int b5, b6, b7;
- r = taal_dcs_read_1(td, DCS_READ_MADCTL, &mode);
+ r = taal_dcs_read_1(td, MIPI_DCS_GET_ADDRESS_MODE, &mode);
if (r)
return r;
@@ -390,7 +376,7 @@ static int taal_set_addr_mode(struct taal_data *td, u8 rotate, bool mirror)
mode &= ~((1<<7) | (1<<6) | (1<<5));
mode |= (b7 << 7) | (b6 << 6) | (b5 << 5);
- return taal_dcs_write_1(td, DCS_MEM_ACC_CTRL, mode);
+ return taal_dcs_write_1(td, MIPI_DCS_SET_ADDRESS_MODE, mode);
}
static int taal_set_update_window(struct taal_data *td,
@@ -403,7 +389,7 @@ static int taal_set_update_window(struct taal_data *td,
u16 y2 = y + h - 1;
u8 buf[5];
- buf[0] = DCS_COLUMN_ADDR;
+ buf[0] = MIPI_DCS_SET_COLUMN_ADDRESS;
buf[1] = (x1 >> 8) & 0xff;
buf[2] = (x1 >> 0) & 0xff;
buf[3] = (x2 >> 8) & 0xff;
@@ -413,7 +399,7 @@ static int taal_set_update_window(struct taal_data *td,
if (r)
return r;
- buf[0] = DCS_PAGE_ADDR;
+ buf[0] = MIPI_DCS_SET_PAGE_ADDRESS;
buf[1] = (y1 >> 8) & 0xff;
buf[2] = (y1 >> 0) & 0xff;
buf[3] = (y2 >> 8) & 0xff;
@@ -1195,7 +1181,8 @@ static int taal_power_on(struct omap_dss_device *dssdev)
if (r)
goto err;
- r = taal_dcs_write_1(td, DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */
+ r = taal_dcs_write_1(td, MIPI_DCS_SET_PIXEL_FORMAT,
+ MIPI_DCS_PIXEL_FMT_24BIT);
if (r)
goto err;
@@ -1209,7 +1196,7 @@ static int taal_power_on(struct omap_dss_device *dssdev)
goto err;
}
- r = taal_dcs_write_0(td, DCS_DISPLAY_ON);
+ r = taal_dcs_write_0(td, MIPI_DCS_SET_DISPLAY_ON);
if (r)
goto err;
@@ -1246,7 +1233,7 @@ static void taal_power_off(struct omap_dss_device *dssdev)
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
int r;
- r = taal_dcs_write_0(td, DCS_DISPLAY_OFF);
+ r = taal_dcs_write_0(td, MIPI_DCS_SET_DISPLAY_OFF);
if (!r)
r = taal_sleep_in(td);
@@ -1529,9 +1516,9 @@ static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable)
int r;
if (enable)
- r = taal_dcs_write_1(td, DCS_TEAR_ON, 0);
+ r = taal_dcs_write_1(td, MIPI_DCS_SET_TEAR_ON, 0);
else
- r = taal_dcs_write_0(td, DCS_TEAR_OFF);
+ r = taal_dcs_write_0(td, MIPI_DCS_SET_TEAR_OFF);
if (!panel_data->use_ext_te)
omapdss_dsi_enable_te(dssdev, enable);
@@ -1851,7 +1838,7 @@ static void taal_esd_work(struct work_struct *work)
goto err;
}
- r = taal_dcs_read_1(td, DCS_RDDSDR, &state1);
+ r = taal_dcs_read_1(td, MIPI_DCS_GET_DIAGNOSTIC_RESULT, &state1);
if (r) {
dev_err(&dssdev->dev, "failed to read Taal status\n");
goto err;
@@ -1864,7 +1851,7 @@ static void taal_esd_work(struct work_struct *work)
goto err;
}
- r = taal_dcs_read_1(td, DCS_RDDSDR, &state2);
+ r = taal_dcs_read_1(td, MIPI_DCS_GET_DIAGNOSTIC_RESULT, &state2);
if (r) {
dev_err(&dssdev->dev, "failed to read Taal status\n");
goto err;
@@ -1880,7 +1867,7 @@ static void taal_esd_work(struct work_struct *work)
/* Self-diagnostics result is also shown on TE GPIO line. We need
* to re-enable TE after self diagnostics */
if (td->te_enabled && panel_data->use_ext_te) {
- r = taal_dcs_write_1(td, DCS_TEAR_ON, 0);
+ r = taal_dcs_write_1(td, MIPI_DCS_SET_TEAR_ON, 0);
if (r)
goto err;
}
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 52a4a02..6735e0c 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -39,6 +39,7 @@
#include <linux/pm_runtime.h>
#include <video/omapdss.h>
+#include <video/mipi_display.h>
#include <plat/clock.h>
#include "dss.h"
@@ -198,18 +199,6 @@ struct dsi_reg { u16 idx; };
DSI_CIO_IRQ_ERRCONTENTIONLP0_4 | DSI_CIO_IRQ_ERRCONTENTIONLP1_4 | \
DSI_CIO_IRQ_ERRCONTENTIONLP0_5 | DSI_CIO_IRQ_ERRCONTENTIONLP1_5)
-#define DSI_DT_DCS_SHORT_WRITE_0 0x05
-#define DSI_DT_DCS_SHORT_WRITE_1 0x15
-#define DSI_DT_DCS_READ 0x06
-#define DSI_DT_SET_MAX_RET_PKG_SIZE 0x37
-#define DSI_DT_NULL_PACKET 0x09
-#define DSI_DT_DCS_LONG_WRITE 0x39
-
-#define DSI_DT_RX_ACK_WITH_ERR 0x02
-#define DSI_DT_RX_DCS_LONG_READ 0x1c
-#define DSI_DT_RX_SHORT_READ_1 0x21
-#define DSI_DT_RX_SHORT_READ_2 0x22
-
typedef void (*omap_dsi_isr_t) (void *arg, u32 mask);
#define DSI_MAX_NR_ISRS 2
@@ -2887,16 +2876,16 @@ static u16 dsi_vc_flush_receive_data(struct platform_device *dsidev,
val = dsi_read_reg(dsidev, DSI_VC_SHORT_PACKET_HEADER(channel));
DSSERR("\trawval %#08x\n", val);
dt = FLD_GET(val, 5, 0);
- if (dt == DSI_DT_RX_ACK_WITH_ERR) {
+ if (dt == MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT) {
u16 err = FLD_GET(val, 23, 8);
dsi_show_rx_ack_with_err(err);
- } else if (dt == DSI_DT_RX_SHORT_READ_1) {
+ } else if (dt == MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE) {
DSSERR("\tDCS short response, 1 byte: %#x\n",
FLD_GET(val, 23, 8));
- } else if (dt == DSI_DT_RX_SHORT_READ_2) {
+ } else if (dt == MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE) {
DSSERR("\tDCS short response, 2 byte: %#x\n",
FLD_GET(val, 23, 8));
- } else if (dt == DSI_DT_RX_DCS_LONG_READ) {
+ } else if (dt == MIPI_DSI_RX_DCS_LONG_READ_RESPONSE) {
DSSERR("\tDCS long response, len %d\n",
FLD_GET(val, 23, 8));
dsi_vc_flush_long_data(dsidev, channel);
@@ -3101,7 +3090,7 @@ int dsi_vc_send_null(struct omap_dss_device *dssdev, int channel)
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
u8 nullpkg[] = {0, 0, 0, 0};
- return dsi_vc_send_long(dsidev, channel, DSI_DT_NULL_PACKET, nullpkg,
+ return dsi_vc_send_long(dsidev, channel, MIPI_DSI_NULL_PACKET, nullpkg,
4, 0);
}
EXPORT_SYMBOL(dsi_vc_send_null);
@@ -3115,14 +3104,15 @@ int dsi_vc_dcs_write_nosync(struct omap_dss_device *dssdev, int channel,
BUG_ON(len == 0);
if (len == 1) {
- r = dsi_vc_send_short(dsidev, channel, DSI_DT_DCS_SHORT_WRITE_0,
- data[0], 0);
+ r = dsi_vc_send_short(dsidev, channel,
+ MIPI_DSI_DCS_SHORT_WRITE, data[0], 0);
} else if (len == 2) {
- r = dsi_vc_send_short(dsidev, channel, DSI_DT_DCS_SHORT_WRITE_1,
+ r = dsi_vc_send_short(dsidev, channel,
+ MIPI_DSI_DCS_SHORT_WRITE_PARAM,
data[0] | (data[1] << 8), 0);
} else {
/* 0x39 = DCS Long Write */
- r = dsi_vc_send_long(dsidev, channel, DSI_DT_DCS_LONG_WRITE,
+ r = dsi_vc_send_long(dsidev, channel, MIPI_DSI_DCS_LONG_WRITE,
data, len, 0);
}
@@ -3188,7 +3178,7 @@ int dsi_vc_dcs_read(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
if (dsi->debug_read)
DSSDBG("dsi_vc_dcs_read(ch%d, dcs_cmd %x)\n", channel, dcs_cmd);
- r = dsi_vc_send_short(dsidev, channel, DSI_DT_DCS_READ, dcs_cmd, 0);
+ r = dsi_vc_send_short(dsidev, channel, MIPI_DSI_DCS_READ, dcs_cmd, 0);
if (r)
goto err;
@@ -3207,13 +3197,13 @@ int dsi_vc_dcs_read(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
if (dsi->debug_read)
DSSDBG("\theader: %08x\n", val);
dt = FLD_GET(val, 5, 0);
- if (dt == DSI_DT_RX_ACK_WITH_ERR) {
+ if (dt == MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT) {
u16 err = FLD_GET(val, 23, 8);
dsi_show_rx_ack_with_err(err);
r = -EIO;
goto err;
- } else if (dt == DSI_DT_RX_SHORT_READ_1) {
+ } else if (dt == MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE) {
u8 data = FLD_GET(val, 15, 8);
if (dsi->debug_read)
DSSDBG("\tDCS short response, 1 byte: %02x\n", data);
@@ -3226,7 +3216,7 @@ int dsi_vc_dcs_read(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
buf[0] = data;
return 1;
- } else if (dt == DSI_DT_RX_SHORT_READ_2) {
+ } else if (dt == MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE) {
u16 data = FLD_GET(val, 23, 8);
if (dsi->debug_read)
DSSDBG("\tDCS short response, 2 byte: %04x\n", data);
@@ -3240,7 +3230,7 @@ int dsi_vc_dcs_read(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
buf[1] = (data >> 8) & 0xff;
return 2;
- } else if (dt == DSI_DT_RX_DCS_LONG_READ) {
+ } else if (dt == MIPI_DSI_RX_DCS_LONG_READ_RESPONSE) {
int w;
int len = FLD_GET(val, 23, 8);
if (dsi->debug_read)
@@ -3330,8 +3320,8 @@ int dsi_vc_set_max_rx_packet_size(struct omap_dss_device *dssdev, int channel,
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
- return dsi_vc_send_short(dsidev, channel, DSI_DT_SET_MAX_RET_PKG_SIZE,
- len, 0);
+ return dsi_vc_send_short(dsidev, channel,
+ MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE, len, 0);
}
EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size);
@@ -3690,7 +3680,7 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */
dsi_write_reg(dsidev, DSI_VC_TE(channel), l);
- dsi_vc_write_long_header(dsidev, channel, DSI_DT_DCS_LONG_WRITE,
+ dsi_vc_write_long_header(dsidev, channel, MIPI_DSI_DCS_LONG_WRITE,
packet_len, 0);
if (dsi->te_enabled)
--
1.7.1
next prev parent reply other threads:[~2011-08-30 10:53 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-30 10:51 [PATCH 00/10] OMAP: DSS2: DSI: Initial DSI video mode support Archit Taneja
2011-08-30 10:51 ` Archit Taneja [this message]
2011-08-30 10:51 ` [PATCH 02/10] OMAP: DSS2: DSI: Represent L4 and VP as sources of VC instead of modes Archit Taneja
2011-08-30 10:51 ` [PATCH 03/10] OMAP: DSS2: Create enum for DSI operation modes Archit Taneja
2011-08-30 10:51 ` [PATCH 04/10] OMAP: DSS2: DSI: Introduce generic write functions Archit Taneja
2011-08-30 10:51 ` [PATCH 05/10] OMAP: DSS2: DSI: Remove functions dsi_vc_dcs_read_1() and dsi_vc_dcs_read_2() Archit Taneja
2011-08-30 10:51 ` [PATCH 06/10] OMAP: DSS2: DSI: Split dsi_vc_dcs_read() into 2 functions Archit Taneja
2011-08-30 10:51 ` [PATCH 07/10] OMAP: DSS2: DSI: Introduce generic read functions Archit Taneja
2011-08-30 10:51 ` [PATCH 08/10] OMAP: DSS2: Clean up stallmode and io pad mode selection Archit Taneja
2011-08-30 10:51 ` [PATCH 09/10] OMAP: DSS2: Create an enum for DSI pixel formats Archit Taneja
2011-08-30 10:51 ` [PATCH 10/10] OMAP: DSS2: DSI Video mode support Archit Taneja
2011-09-01 13:14 ` Tomi Valkeinen
2011-09-02 5:15 ` Archit Taneja
2011-09-02 5:32 ` Tomi Valkeinen
2011-09-02 6:13 ` Archit Taneja
2011-09-02 7:55 ` Tomi Valkeinen
2011-09-05 5:52 ` Archit Taneja
2011-09-05 6:52 ` Tomi Valkeinen
2011-09-05 7:11 ` Archit Taneja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314701495-11247-2-git-send-email-archit@ti.com \
--to=archit@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).