From: <mythripk@ti.com>
To: tomi.valkeinen@ti.com, linux-omap@vger.kernel.org
Cc: Mythri P K <mythripk@ti.com>
Subject: [PATCH v3 04/10] OMAP4: DSS: HDMI: Move IP independent common header
Date: Fri, 2 Sep 2011 16:17:44 +0530 [thread overview]
Message-ID: <1314960470-2616-5-git-send-email-mythripk@ti.com> (raw)
In-Reply-To: <1314960470-2616-4-git-send-email-mythripk@ti.com>
From: Mythri P K <mythripk@ti.com>
Some of the header file definitions that are there in the hdmi.h are generic
and can be used across OMAP's, Thus moving generic definition to new file.
Signed-off-by: Mythri P K <mythripk@ti.com>
---
drivers/video/omap2/dss/dss.h | 18 -------
drivers/video/omap2/dss/hdmi.c | 1 +
drivers/video/omap2/dss/hdmi.h | 53 ---------------------
drivers/video/omap2/dss/ti_hdmi.h | 94 +++++++++++++++++++++++++++++++++++++
4 files changed, 95 insertions(+), 71 deletions(-)
create mode 100644 drivers/video/omap2/dss/ti_hdmi.h
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 4cb264e..7c9565f 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -150,24 +150,6 @@ struct dsi_clock_info {
bool use_sys_clk;
};
-enum hdmi_clk_refsel {
- HDMI_REFSEL_PCLK = 0,
- HDMI_REFSEL_REF1 = 1,
- HDMI_REFSEL_REF2 = 2,
- HDMI_REFSEL_SYSCLK = 3
-};
-
-/* HDMI PLL structure */
-struct hdmi_pll_info {
- u16 regn;
- u16 regm;
- u32 regmf;
- u16 regm2;
- u16 regsd;
- u16 dcofreq;
- enum hdmi_clk_refsel refsel;
-};
-
struct seq_file;
struct platform_device;
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 09c0b28..aea4a79 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -39,6 +39,7 @@
#include <sound/pcm_params.h>
#endif
+#include "ti_hdmi.h"
#include "dss.h"
#include "hdmi.h"
#include "dss_features.h"
diff --git a/drivers/video/omap2/dss/hdmi.h b/drivers/video/omap2/dss/hdmi.h
index 02342f6..cb50f6a 100644
--- a/drivers/video/omap2/dss/hdmi.h
+++ b/drivers/video/omap2/dss/hdmi.h
@@ -198,39 +198,12 @@ struct hdmi_reg { u16 idx; };
#define REG_GET(base, idx, start, end) \
FLD_GET(hdmi_read_reg(base, idx), start, end)
-struct hdmi_video_timings {
- u16 x_res;
- u16 y_res;
- /* Unit: KHz */
- u32 pixel_clock;
- u16 hsw;
- u16 hfp;
- u16 hbp;
- u16 vsw;
- u16 vfp;
- u16 vbp;
-};
-
-/* HDMI timing structure */
-struct hdmi_timings {
- struct hdmi_video_timings timings;
- int vsync_pol;
- int hsync_pol;
-};
-
enum hdmi_phy_pwr {
HDMI_PHYPWRCMD_OFF = 0,
HDMI_PHYPWRCMD_LDOON = 1,
HDMI_PHYPWRCMD_TXON = 2
};
-enum hdmi_pll_pwr {
- HDMI_PLLPWRCMD_ALLOFF = 0,
- HDMI_PLLPWRCMD_PLLONLY = 1,
- HDMI_PLLPWRCMD_BOTHON_ALLCLKS = 2,
- HDMI_PLLPWRCMD_BOTHON_NOPHYCLK = 3
-};
-
enum hdmi_core_inputbus_width {
HDMI_INPUT_8BIT = 0,
HDMI_INPUT_10BIT = 1,
@@ -259,11 +232,6 @@ enum hdmi_core_packet_mode {
HDMI_PACKETMODE48BITPERPIXEL = 7
};
-enum hdmi_core_hdmi_dvi {
- HDMI_DVI = 0,
- HDMI_HDMI = 1
-};
-
enum hdmi_core_tclkselclkmult {
HDMI_FPLL05IDCK = 0,
HDMI_FPLL10IDCK = 1,
@@ -564,27 +532,6 @@ struct hdmi_video_interface {
int tm; /* Timing mode */
};
-struct hdmi_cm {
- int code;
- int mode;
-};
-
-struct hdmi_config {
- struct hdmi_timings timings;
- u16 interlace;
- struct hdmi_cm cm;
-};
-
-struct hdmi_ip_data {
- void __iomem *base_wp; /* HDMI wrapper */
- unsigned long core_sys_offset;
- unsigned long core_av_offset;
- unsigned long pll_offset;
- unsigned long phy_offset;
- struct hdmi_config cfg;
- struct hdmi_pll_info pll_data;
-};
-
struct hdmi_audio_format {
enum hdmi_stereo_channels stereo_channels;
u8 active_chnnls_msk;
diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h
new file mode 100644
index 0000000..f0e508e
--- /dev/null
+++ b/drivers/video/omap2/dss/ti_hdmi.h
@@ -0,0 +1,94 @@
+/*
+ * ti_hdmi.h
+ *
+ * HDMI driver definition for TI OMAP4, DM81xx, DM38xx Processor.
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TI_HDMI_H
+#define _TI_HDMI_H
+
+enum hdmi_pll_pwr {
+ HDMI_PLLPWRCMD_ALLOFF = 0,
+ HDMI_PLLPWRCMD_PLLONLY = 1,
+ HDMI_PLLPWRCMD_BOTHON_ALLCLKS = 2,
+ HDMI_PLLPWRCMD_BOTHON_NOPHYCLK = 3
+};
+
+enum hdmi_core_hdmi_dvi {
+ HDMI_DVI = 0,
+ HDMI_HDMI = 1
+};
+
+enum hdmi_clk_refsel {
+ HDMI_REFSEL_PCLK = 0,
+ HDMI_REFSEL_REF1 = 1,
+ HDMI_REFSEL_REF2 = 2,
+ HDMI_REFSEL_SYSCLK = 3
+};
+
+struct hdmi_video_timings {
+ u16 x_res;
+ u16 y_res;
+ /* Unit: KHz */
+ u32 pixel_clock;
+ u16 hsw;
+ u16 hfp;
+ u16 hbp;
+ u16 vsw;
+ u16 vfp;
+ u16 vbp;
+};
+
+/* HDMI timing structure */
+struct hdmi_timings {
+ struct hdmi_video_timings timings;
+ int vsync_pol;
+ int hsync_pol;
+};
+
+struct hdmi_cm {
+ int code;
+ int mode;
+};
+
+struct hdmi_config {
+ struct hdmi_timings timings;
+ u16 interlace;
+ struct hdmi_cm cm;
+};
+
+/* HDMI PLL structure */
+struct hdmi_pll_info {
+ u16 regn;
+ u16 regm;
+ u32 regmf;
+ u16 regm2;
+ u16 regsd;
+ u16 dcofreq;
+ enum hdmi_clk_refsel refsel;
+};
+
+struct hdmi_ip_data {
+ void __iomem *base_wp; /* HDMI wrapper */
+ unsigned long core_sys_offset;
+ unsigned long core_av_offset;
+ unsigned long pll_offset;
+ unsigned long phy_offset;
+ struct hdmi_config cfg;
+ struct hdmi_pll_info pll_data;
+};
+#endif
--
1.7.5.4
next prev parent reply other threads:[~2011-09-02 10:56 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-02 10:47 [PATCH v3 00/10]HDMI: Split hdmi.c in DSS to seperate OMAP dependent mythripk
2011-09-02 10:47 ` [PATCH v3 01/10] OMAP4: DSS: HDMI: HDMI clean up to pass base_address mythripk
2011-09-02 10:47 ` [PATCH v3 02/10] OMAP4: DSS: HDMI: Move pll and video configuration mythripk
2011-09-02 10:47 ` [PATCH v3 03/10] OMAP4: DSS: HDMI: Use specific HDMI timings structure mythripk
2011-09-02 10:47 ` mythripk [this message]
2011-09-02 10:47 ` [PATCH v3 05/10] OMAP4 : DSS : HDMI : Move the EDID portion from HDMI mythripk
2011-09-02 10:47 ` [PATCH v3 06/10] OMAP4: DSS2: HDMI: Split the HDMI driver to DSS and IP mythripk
2011-09-02 10:47 ` [PATCH v3 07/10] OMAP4: DSS: HDMI: Rename the functions in HDMI IP mythripk
2011-09-02 10:47 ` [PATCH v3 08/10] OMAP4: DSS: HDMI: Move the common HDMI header file mythripk
2011-09-02 10:47 ` [PATCH v3 09/10] OMAP4: DSS2: HDMI: Function pointer approach to call mythripk
2011-09-02 10:47 ` [PATCH v3 10/10] OMAP4: DSS: Rename hdmi_omap4_panel.c to hdmi_panel.c mythripk
2011-09-05 5:40 ` [PATCH v3 09/10] OMAP4: DSS2: HDMI: Function pointer approach to call Semwal, Sumit
2011-09-05 11:01 ` Tomi Valkeinen
2011-09-05 17:33 ` K, Mythri P
2011-09-06 6:08 ` K, Mythri P
2011-09-06 10:17 ` Tomi Valkeinen
2011-09-06 11:25 ` K, Mythri P
2011-09-06 12:45 ` Tomi Valkeinen
2011-09-06 13:05 ` K, Mythri P
2011-09-05 7:40 ` [PATCH v3 00/10]HDMI: Split hdmi.c in DSS to seperate OMAP dependent Tomi Valkeinen
2011-09-05 10:35 ` K, Mythri P
2011-09-05 10:41 ` Tomi Valkeinen
2011-09-05 12:15 ` Tomi Valkeinen
2011-09-05 13:22 ` K, Mythri P
2011-09-06 9:39 ` K, Mythri P
2011-09-06 11:28 ` K, Mythri P
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314960470-2616-5-git-send-email-mythripk@ti.com \
--to=mythripk@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox