[PATCH 5/6 v3] ti814evm: Add support for musb interface

[Ajay Kumar Gupta <ajay.gupta@ti.com>]

From: Ravi Babu <ravibabu@ti.com>

Adding musb support in ti814 EVM board file.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Ravi Babu <ravibabu@ti.com>
---
 arch/arm/mach-omap2/board-ti8148evm.c |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-ti8148evm.c b/arch/arm/mach-omap2/board-ti8148evm.c
index 588d6b7..7dbf115 100644
--- a/arch/arm/mach-omap2/board-ti8148evm.c
+++ b/arch/arm/mach-omap2/board-ti8148evm.c
@@ -23,6 +23,14 @@
 #include <plat/irqs.h>
 #include <plat/board.h>
 #include <plat/common.h>
+#include <plat/usb.h>
+
+static struct omap_musb_board_data musb_board_data = {
+	.set_phy_power	= ti81xx_musb_phy_power,
+	.interface_type	= MUSB_INTERFACE_ULPI,
+	.mode           = MUSB_OTG,
+	.power		= 500,
+};
 
 static struct omap_board_config_kernel ti8148_evm_config[] __initdata = {
 };
@@ -38,6 +46,7 @@ static void __init ti8148_evm_init(void)
 	omap_serial_init();
 	omap_board_config = ti8148_evm_config;
 	omap_board_config_size = ARRAY_SIZE(ti8148_evm_config);
+	usb_musb_init(&musb_board_data);
 }
 
 static void __init ti8148_evm_map_io(void)
-- 
1.6.2.4