From: Archit Taneja <archit@ti.com>
To: tomi.valkeinen@ti.com
Cc: linux-omap@vger.kernel.org, Archit Taneja <archit@ti.com>
Subject: [PATCH v3 02/10] OMAP: DSS2: Pass overlay replication and fifo thresholds as arguments to dispc_ovl_setup()
Date: Wed, 14 Sep 2011 17:53:28 +0530 [thread overview]
Message-ID: <1316003008-24192-3-git-send-email-archit@ti.com> (raw)
In-Reply-To: <1316003008-24192-1-git-send-email-archit@ti.com>
dispc_ovl_enable_replication() and dispc_ovl_set_fifo_threshold() are currently
called in configure_overlay(). These are the only functions which cause DISPC
register writes of overlay parameters outside of dispc_ovl_setup().
Move these to dispc_ovl_setup() and pass replication, fifo_low and fifo_high
thresholds as arguments to dispc_ovl_setup() in order to be aligned with other
overlay parameters. No functional changes are made.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/dispc.c | 20 +++++++++++++-------
drivers/video/omap2/dss/dss.h | 5 ++---
drivers/video/omap2/dss/manager.c | 7 ++-----
3 files changed, 17 insertions(+), 15 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index f01a26d..fbcefce 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -971,7 +971,7 @@ static void dispc_ovl_set_vid_color_conv(enum omap_plane plane, bool enable)
dispc_write_reg(DISPC_OVL_ATTRIBUTES(plane), val);
}
-void dispc_ovl_enable_replication(enum omap_plane plane, bool enable)
+static void dispc_ovl_enable_replication(enum omap_plane plane, bool enable)
{
static const unsigned shifts[] = { 5, 10, 10 };
int shift;
@@ -1019,7 +1019,8 @@ u32 dispc_ovl_get_fifo_size(enum omap_plane plane)
return dispc.fifo_size[plane];
}
-void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low, u32 high)
+static void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low,
+ u32 high)
{
u8 hi_start, hi_end, lo_start, lo_end;
u32 unit;
@@ -1675,7 +1676,8 @@ static unsigned long calc_fclk(enum omap_channel channel, u16 width,
}
int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
- bool ilace, enum omap_channel channel)
+ bool ilace, enum omap_channel channel, bool replication,
+ u32 fifo_low, u32 fifo_high)
{
const int maxdownscale = cpu_is_omap34xx() ? 4 : 2;
bool five_taps = 0;
@@ -1688,10 +1690,11 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
unsigned int field_offset = 0;
DSSDBG("dispc_ovl_setup %d, pa %x, pa_uv %x, sw %d, %d,%d, %dx%d -> "
- "%dx%d, cmode %x, rot %d, mir %d, ilace %d chan %d\n",
- plane, oi->paddr, oi->p_uv_addr, oi->screen_width, oi->pos_x,
- oi->pos_y, oi->width, oi->height, oi->out_width, oi->out_height,
- oi->color_mode, oi->rotation, oi->mirror, ilace, channel);
+ "%dx%d, cmode %x, rot %d, mir %d, ilace %d chan %d repl %d "
+ "fifo_low %d fifo high %d\n", plane, oi->paddr, oi->p_uv_addr,
+ oi->screen_width, oi->pos_x, oi->pos_y, oi->width, oi->height,
+ oi->out_width, oi->out_height, oi->color_mode, oi->rotation,
+ oi->mirror, ilace, channel, replication, fifo_low, fifo_high);
if (oi->paddr == 0)
return -EINVAL;
@@ -1839,6 +1842,9 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
dispc_ovl_set_channel_out(plane, channel);
+ dispc_ovl_enable_replication(plane, replication);
+ dispc_ovl_set_fifo_threshold(plane, fifo_low, fifo_high);
+
return 0;
}
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index bcc9c4e..dff9b79 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -400,12 +400,11 @@ int dispc_calc_clock_rates(unsigned long dispc_fclk_rate,
u32 dispc_ovl_get_fifo_size(enum omap_plane plane);
-void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low, u32 high);
u32 dispc_ovl_get_burst_size(enum omap_plane plane);
int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
- bool ilace, enum omap_channel channel);
+ bool ilace, enum omap_channel channel, bool replication,
+ u32 fifo_low, u32 fifo_high);
int dispc_ovl_enable(enum omap_plane plane, bool enable);
-void dispc_ovl_enable_replication(enum omap_plane plane, bool enable);
void dispc_mgr_enable_fifohandcheck(enum omap_channel channel, bool enable);
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index f1c334c..fdbbeeb 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -940,7 +940,8 @@ static int configure_overlay(enum omap_plane plane)
new_oi.out_height = outh;
new_oi.paddr = paddr;
- r = dispc_ovl_setup(plane, &new_oi, c->ilace, c->channel);
+ r = dispc_ovl_setup(plane, &new_oi, c->ilace, c->channel,
+ c->replication, c->fifo_low, c->fifo_high);
if (r) {
/* this shouldn't happen */
DSSERR("dispc_ovl_setup failed for ovl %d\n", plane);
@@ -948,10 +949,6 @@ static int configure_overlay(enum omap_plane plane)
return r;
}
- dispc_ovl_enable_replication(plane, c->replication);
-
- dispc_ovl_set_fifo_threshold(plane, c->fifo_low, c->fifo_high);
-
dispc_ovl_enable(plane, 1);
return 0;
--
1.7.1
prev parent reply other threads:[~2011-09-14 12:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-14 12:23 [PATCH v3 00/10] OMAP4: DSS2: VIDEO3, zorder and misc DSS patches Archit Taneja
2011-09-14 12:23 ` [PATCH v3 01/10] OMAP: DSS2: Reduce the number of arguments in dispc_ovl_setup() Archit Taneja
2011-09-14 12:23 ` Archit Taneja [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1316003008-24192-3-git-send-email-archit@ti.com \
--to=archit@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox