Re: [PATCH 5/5] OMAPDSS: HDMI: Add support to dump clocks through

[Tomi Valkeinen <tomi.valkeinen@ti.com>]

On Tue, 2011-09-20 at 21:06 +0530, K, Mythri P wrote:
> Hi,
> 
> On Tue, Sep 20, 2011 at 7:01 PM, Tomi Valkeinen <tomi.valkeinen@ti.com> wrote:
> > On Tue, 2011-09-20 at 18:19 +0530, mythripk@ti.com wrote:
> >> From: Mythri P K <mythripk@ti.com>
> >>
> >> Add support to dump the HDMI regm, regn, and other clock parameters.
> >
> > This patch doesn't work at all. It's checking for CONFIG_OMAP2_DSS_HDMI,
> > whereas the actual define is CONFIG_OMAP4_DSS_HDMI. And even after
> > fixing that, the output is:
> >
> > HDMI Clock Info
> > regm            104regmf 104
> > dcofreq 0regsd 1
> > DSS_FCK (DSS_FCLK)      (off)
> > hdmi fclk source = 3
> >
> These are the reg m , mf , dcofreq , by default the HDMI clock input is sysclk ,
> These values are based on the pixel clock.I suppose all the other
> clock values are
> printed via dss / dispc clock dump , is there any other dump that is missing?

I don't know, as the output was so garbled that I didn't look any
further.

But just look at the outputs from other interfaces, mainly DSI. Make the
output format similar, and print relevant information in the same way.

 Tomi