From: jean.pihet@newoldbits.com
To: Kevin Hilman <khilman@ti.com>,
Linux PM mailing list <linux-pm@lists.linux-foundation.org>,
linux-omap@vger.kernel.org, "Rafael J. Wysocki" <rjw@sisk.pl>,
Paul Walmsley <paul@pwsan.co>
Cc: Jean Pihet <j-pihet@ti.com>
Subject: [PATCH 8/8] OMAP3: powerdomain data: add wake-up latency figures
Date: Wed, 21 Sep 2011 18:24:18 +0200 [thread overview]
Message-ID: <1316622258-3892-9-git-send-email-j-pihet@ti.com> (raw)
In-Reply-To: <1316622258-3892-1-git-send-email-j-pihet@ti.com>
From: Jean Pihet <j-pihet@ti.com>
Figures are added to the power domains structs for RET and OFF modes.
Note: the latency figures for MPU, PER, CORE, NEON have been obtained
from actual measurements.
The latency figures for the other power domains are preliminary and
shall be added.
Cf. http://www.omappedia.org/wiki/Power_Management_Device_Latencies_Measurement
for a detailed explanation on where are the numbers magically coming from.
Tested on OMAP3 Beagleboard in RET/OFF using wake-up latency constraints
on MPU, CORE and PER.
Signed-off-by: Jean Pihet <j-pihet@ti.com>
---
arch/arm/mach-omap2/powerdomains3xxx_data.c | 78 +++++++++++++++++++++++++++
1 files changed, 78 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index 469a920..32922bb 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -31,6 +31,14 @@
/*
* Powerdomains
+ *
+ * The wakeup_lat values are derived from measurements on
+ * the actual target.
+ *
+ * Note: the latency figures for MPU, PER, CORE, NEON have been obtained
+ * from actual measurements.
+ * The latency figures for the other power domains are preliminary and
+ * shall be added.
*/
static struct powerdomain iva2_pwrdm = {
@@ -52,6 +60,13 @@ static struct powerdomain iva2_pwrdm = {
[2] = PWRSTS_OFF_ON,
[3] = PWRSTS_ON,
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 1100,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 350,
+ [PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
static struct powerdomain mpu_3xxx_pwrdm = {
@@ -68,6 +83,13 @@ static struct powerdomain mpu_3xxx_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRSTS_OFF_ON,
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 1830,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 121,
+ [PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
/*
@@ -98,6 +120,13 @@ static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 3082,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 153,
+ [PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
static struct powerdomain core_3xxx_es3_1_pwrdm = {
@@ -121,6 +150,13 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = {
[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 3082,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 153,
+ [PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
static struct powerdomain dss_pwrdm = {
@@ -136,6 +172,13 @@ static struct powerdomain dss_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 70,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 20,
+ [PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
/*
@@ -157,6 +200,13 @@ static struct powerdomain sgx_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 1000,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
static struct powerdomain cam_pwrdm = {
@@ -172,6 +222,13 @@ static struct powerdomain cam_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 850,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 35,
+ [PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
static struct powerdomain per_pwrdm = {
@@ -187,6 +244,13 @@ static struct powerdomain per_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 671,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 31,
+ [PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
static struct powerdomain emu_pwrdm = {
@@ -201,6 +265,13 @@ static struct powerdomain neon_pwrdm = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 0,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 0,
+ [PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
static struct powerdomain usbhost_pwrdm = {
@@ -223,6 +294,13 @@ static struct powerdomain usbhost_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 800,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 150,
+ [PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
static struct powerdomain dpll1_pwrdm = {
--
1.7.4.1
next prev parent reply other threads:[~2011-09-21 16:26 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-21 16:14 [PATCH v2 0/8] PM QoS: implement the OMAP low level constraints management code Jean Pihet
2011-09-21 16:14 ` [PATCH 1/8] OMAP: convert I2C driver to PM QoS for latency constraints Jean Pihet
2011-09-21 16:14 ` [PATCH 2/8] OMAP: PM: remove the latency related functions from the API Jean Pihet
2011-09-21 16:14 ` [PATCH 3/8] OMAP2+: powerdomain: control power domains next state Jean Pihet
2011-09-21 16:14 ` [PATCH 4/8] OMAP2+: omap_hwmod: manage the wake-up latency constraints Jean Pihet
2011-09-21 16:14 ` [PATCH 5/8] OMAP: PM: register to the per-device PM QoS framework Jean Pihet
2011-09-21 16:14 ` [PATCH 6/8] OMAP3: cpuidle: next C-state decision depends on the PM QoS MPU and CORE constraints Jean Pihet
2011-09-21 16:14 ` [PATCH 7/8] OMAP3: update cpuidle latency and threshold figures Jean Pihet
2011-10-12 2:48 ` Ming Lei
2011-10-12 7:29 ` Jean Pihet
2011-09-21 16:14 ` [PATCH 8/8] OMAP3: powerdomain data: add wake-up latency figures Jean Pihet
2011-09-21 16:24 ` [PATCH v2 0/8] PM QoS: implement the OMAP low level constraints management code jean.pihet
2011-09-21 16:24 ` [PATCH 1/8] OMAP: convert I2C driver to PM QoS for latency constraints jean.pihet
2011-09-21 16:24 ` [PATCH 2/8] OMAP: PM: remove the latency related functions from the API jean.pihet
2011-09-21 16:24 ` [PATCH 3/8] OMAP2+: powerdomain: control power domains next state jean.pihet
2011-09-21 16:24 ` [PATCH 4/8] OMAP2+: omap_hwmod: manage the wake-up latency constraints jean.pihet
2011-10-07 2:53 ` Paul Walmsley
2011-10-10 8:08 ` Jean Pihet
2011-10-12 15:27 ` Jean Pihet
2011-09-21 16:24 ` [PATCH 5/8] OMAP: PM: register to the per-device PM QoS framework jean.pihet
2011-09-21 16:24 ` [PATCH 6/8] OMAP3: cpuidle: next C-state decision depends on the PM QoS MPU and CORE constraints jean.pihet
2011-09-21 16:24 ` [PATCH 7/8] OMAP3: update cpuidle latency and threshold figures jean.pihet
2011-09-21 16:24 ` jean.pihet [this message]
2011-10-07 4:17 ` [PATCH 8/8] OMAP3: powerdomain data: add wake-up latency figures Paul Walmsley
2011-10-10 8:17 ` Jean Pihet
2011-10-10 22:44 ` Paul Walmsley
2011-10-10 22:52 ` Paul Walmsley
2011-10-11 6:50 ` Pihet-XID, Jean
2011-10-07 15:26 ` Paul Walmsley
2011-10-10 8:19 ` Jean Pihet
2011-09-21 16:27 ` [PATCH v2 0/8] PM QoS: implement the OMAP low level constraints management code Jean Pihet
-- strict thread matches above, loose matches on Subject: below --
2011-10-12 15:24 [PATCH v3 " jean.pihet
2011-10-12 15:24 ` [PATCH 8/8] OMAP3: powerdomain data: add wake-up latency figures jean.pihet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1316622258-3892-9-git-send-email-j-pihet@ti.com \
--to=jean.pihet@newoldbits.com \
--cc=j-pihet@ti.com \
--cc=khilman@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=paul@pwsan.co \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox