From: Benoit Cousson <b-cousson@ti.com>
To: khilman@ti.com
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
grant.likely@secretlab.ca, Benoit Cousson <b-cousson@ti.com>
Subject: [PATCH v3 1/2] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration
Date: Thu, 22 Sep 2011 22:52:24 +0200 [thread overview]
Message-ID: <1316724745-24896-2-git-send-email-b-cousson@ti.com> (raw)
In-Reply-To: <1316724745-24896-1-git-send-email-b-cousson@ti.com>
Split the omap_device_build_ss into two smaller functions
that will allow to populate a platform_device already allocated by
device-tree.
The functionality of the omap_device_build_ss is still the same, but
the omap_device_alloc will be usable with devices already built by
device-tree.
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
---
arch/arm/plat-omap/omap_device.c | 177 +++++++++++++++++++++++++------------
1 files changed, 119 insertions(+), 58 deletions(-)
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 54bbe7b..cac7b9a 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -96,6 +96,11 @@
static int omap_device_register(struct platform_device *pdev);
static int omap_early_device_register(struct platform_device *pdev);
+static struct omap_device *omap_device_alloc(struct platform_device *pdev,
+ struct omap_hwmod **ohs, int oh_cnt,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt);
+
static struct omap_device_pm_latency omap_default_latency[] = {
{
@@ -397,6 +402,110 @@ static int omap_device_fill_resources(struct omap_device *od,
}
/**
+ * omap_device_alloc - allocate an omap_device
+ * @pdev: platform_device that will be included in this omap_device
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ *
+ * Convenience function for allocating an omap_device structure and filling
+ * hwmods, resources and pm_latency attributes.
+ *
+ * Returns an struct omap_device pointer or ERR_PTR() on error;
+ */
+static struct omap_device *omap_device_alloc(struct platform_device *pdev,
+ struct omap_hwmod **ohs, int oh_cnt,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt)
+{
+ int ret = -ENOMEM;
+ struct omap_device *od;
+ struct resource *res = NULL;
+ int i, res_count;
+ struct omap_hwmod **hwmods;
+
+ od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
+ if (!od) {
+ ret = -ENOMEM;
+ goto oda_exit1;
+ }
+ od->hwmods_cnt = oh_cnt;
+
+ hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
+ if (!hwmods)
+ goto oda_exit2;
+
+ od->hwmods = hwmods;
+ od->pdev = pdev;
+
+ /*
+ * HACK: Ideally the resources from DT should match, and hwmod
+ * should just add the missing ones. Since the name is not
+ * properly populated by DT, stick to hwmod resources only.
+ */
+ if (pdev->num_resources && pdev->resource)
+ dev_warn(&pdev->dev, "%s(): resources already allocated %d\n",
+ __func__, pdev->num_resources);
+
+ res_count = omap_device_count_resources(od);
+ if (res_count > 0) {
+ dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n",
+ __func__, res_count);
+ res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
+ if (!res)
+ goto oda_exit3;
+
+ omap_device_fill_resources(od, res);
+
+ ret = platform_device_add_resources(pdev, res, res_count);
+ kfree(res);
+
+ if (ret)
+ goto oda_exit3;
+ }
+
+ if (!pm_lats) {
+ pm_lats = omap_default_latency;
+ pm_lats_cnt = ARRAY_SIZE(omap_default_latency);
+ }
+
+ od->pm_lats_cnt = pm_lats_cnt;
+ od->pm_lats = kmemdup(pm_lats,
+ sizeof(struct omap_device_pm_latency) * pm_lats_cnt,
+ GFP_KERNEL);
+ if (!od->pm_lats)
+ goto oda_exit3;
+
+ pdev->archdata.od = od;
+
+ for (i = 0; i < oh_cnt; i++) {
+ hwmods[i]->od = od;
+ _add_hwmod_clocks_clkdev(od, hwmods[i]);
+ }
+
+ return od;
+
+oda_exit3:
+ kfree(hwmods);
+oda_exit2:
+ kfree(od);
+oda_exit1:
+ dev_err(&pdev->dev, "omap_device: build failed (%d)\n", ret);
+
+ return ERR_PTR(ret);
+}
+
+static void omap_device_delete(struct omap_device *od)
+{
+ od->pdev->archdata.od = NULL;
+ kfree(od->pm_lats);
+ kfree(od->hwmods);
+ kfree(od);
+}
+
+/**
* omap_device_build - build and register an omap_device with one omap_hwmod
* @pdev_name: name of the platform_device driver to use
* @pdev_id: this platform_device's connection ID
@@ -455,9 +564,6 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
int ret = -ENOMEM;
struct platform_device *pdev;
struct omap_device *od;
- struct resource *res = NULL;
- int i, res_count;
- struct omap_hwmod **hwmods;
if (!ohs || oh_cnt == 0 || !pdev_name)
return ERR_PTR(-EINVAL);
@@ -471,76 +577,31 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
goto odbs_exit;
}
- pr_debug("omap_device: %s: building with %d hwmods\n", pdev_name,
- oh_cnt);
+ /* Set the dev_name early to allow dev_xxx in omap_device_alloc */
+ if (pdev->id != -1)
+ dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
+ else
+ dev_set_name(&pdev->dev, "%s", pdev->name);
- od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
- if (!od) {
- ret = -ENOMEM;
+ od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt);
+ if (!od)
goto odbs_exit1;
- }
- od->hwmods_cnt = oh_cnt;
-
- hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt,
- GFP_KERNEL);
- if (!hwmods)
- goto odbs_exit2;
-
- memcpy(hwmods, ohs, sizeof(struct omap_hwmod *) * oh_cnt);
- od->hwmods = hwmods;
- od->pdev = pdev;
-
- res_count = omap_device_count_resources(od);
- if (res_count > 0) {
- res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
- if (!res)
- goto odbs_exit3;
-
- omap_device_fill_resources(od, res);
-
- ret = platform_device_add_resources(pdev, res, res_count);
- kfree(res);
-
- if (ret)
- goto odbs_exit3;
- }
ret = platform_device_add_data(pdev, pdata, pdata_len);
if (ret)
- goto odbs_exit3;
-
- pdev->archdata.od = od;
+ goto odbs_exit2;
if (is_early_device)
ret = omap_early_device_register(pdev);
else
ret = omap_device_register(pdev);
if (ret)
- goto odbs_exit3;
-
- if (!pm_lats) {
- pm_lats = omap_default_latency;
- pm_lats_cnt = ARRAY_SIZE(omap_default_latency);
- }
-
- od->pm_lats_cnt = pm_lats_cnt;
- od->pm_lats = kmemdup(pm_lats,
- sizeof(struct omap_device_pm_latency) * pm_lats_cnt,
- GFP_KERNEL);
- if (!od->pm_lats)
- goto odbs_exit3;
-
- for (i = 0; i < oh_cnt; i++) {
- hwmods[i]->od = od;
- _add_hwmod_clocks_clkdev(od, hwmods[i]);
- }
+ goto odbs_exit2;
return pdev;
-odbs_exit3:
- kfree(hwmods);
odbs_exit2:
- kfree(od);
+ omap_device_delete(od);
odbs_exit1:
platform_device_put(pdev);
odbs_exit:
--
1.7.0.4
next prev parent reply other threads:[~2011-09-22 20:53 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-22 20:52 [PATCH v3 0/2] OMAP: omap_device: Add a method to build an omap_device from a DT node Benoit Cousson
2011-09-22 20:52 ` Benoit Cousson [this message]
2011-09-22 20:52 ` [PATCH v3 2/2] " Benoit Cousson
2011-09-27 1:46 ` Grant Likely
2011-09-27 16:04 ` Cousson, Benoit
2011-09-28 16:11 ` Cousson, Benoit
2011-09-28 17:47 ` Kevin Hilman
2011-09-29 17:30 ` Grant Likely
2011-09-29 20:46 ` Kevin Hilman
2011-09-26 22:38 ` [PATCH v3 0/2] " Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1316724745-24896-2-git-send-email-b-cousson@ti.com \
--to=b-cousson@ti.com \
--cc=grant.likely@secretlab.ca \
--cc=khilman@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox