linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/7] RFC: convert OMAP to common struct clk
@ 2011-12-14  4:11 Mike Turquette
  2011-12-14  4:11 ` [PATCH 1/7] OMAP: Kconfig: select GENERIC_CLK Mike Turquette
                   ` (6 more replies)
  0 siblings, 7 replies; 11+ messages in thread
From: Mike Turquette @ 2011-12-14  4:11 UTC (permalink / raw)
  To: linux
  Cc: linux-omap, linux-arm-kernel, khilman, tony, b-cousson, rnayak,
	jeremy.kerr, paul, broonie, tglx, linus.walleij, amit.kucheria,
	dsaxena, patches, linaro-dev, grant.likely, sboyd, shawn.guo,
	skannan, magnus.damm, arnd.bergmann, eric.miao, richard.zhao,
	mturquette, mturquette, andrew

This patch series is an RFC for converting OMAP to the common struct
clk.  These patches are based on v4 of the common struct clk series:
https://lkml.org/lkml/2011/12/13/451

OMAP's old struct clk has been renamed to struct clk_hw_omap, but left
essentially the same.  This series only targets OMAP4 and was only
tested on a 4430 Panda.

The next step is to figure out:
 * what are the various clk types we want to support in separate
   structures
 * where does the "clk driver" code live (still in mach-omap2?)
 * kill off plat-omap/clock.* completely?  I vote yes.

These patches can also be found at,
http://git.linaro.org/gitweb?p=people/mturquette/linux.git;a=shortlog;h=refs/heads/v3.2-rc5-clkv4-omap

The same series merged with Kevin's PM branch (to get CPUfreq working)
can be found at,
http://git.linaro.org/gitweb?p=people/mturquette/linux.git;a=shortlog;h=refs/heads/v3.2-rc5-clkv4-omap-pm

This series will be followed up shortly with another set of patches for
"testing" the clk rate change notifiers, parent propagation of rate
changes and debugfs re-parenting.

Mike Turquette (7):
  OMAP: Kconfig: select GENERIC_CLK
  HACK: omap4: clk: convert to common struct clk
  HACK: omap: convert 44xx data to common struct clk
  omap: hwmod: convert to use common struct clk
  omap: panda: use clk_prepare in ehci init
  omap: dss: use clk_prepare in dss reset
  HACK: comment WARN_ON in _clkdm_clk_hwmod_disable

 arch/arm/mach-omap2/Kconfig             |    1 +
 arch/arm/mach-omap2/board-omap4panda.c  |    1 +
 arch/arm/mach-omap2/clkt_clksel.c       |  195 +-
 arch/arm/mach-omap2/clkt_dpll.c         |   54 +-
 arch/arm/mach-omap2/clock.c             |  363 +--
 arch/arm/mach-omap2/clock.h             |   59 +-
 arch/arm/mach-omap2/clock44xx_data.c    | 4615 ++++++++++++++++++-------------
 arch/arm/mach-omap2/clockdomain.c       |    2 +-
 arch/arm/mach-omap2/display.c           |    4 +-
 arch/arm/mach-omap2/dpll3xxx.c          |  228 +-
 arch/arm/mach-omap2/dpll44xx.c          |   62 +-
 arch/arm/mach-omap2/omap_hwmod.c        |   54 +-
 arch/arm/plat-omap/clock.c              |  315 +--
 arch/arm/plat-omap/include/plat/clock.h |   96 +-
 14 files changed, 3415 insertions(+), 2634 deletions(-)

-- 
1.7.5.4


^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2011-12-14  5:29 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-12-14  4:11 [PATCH 0/7] RFC: convert OMAP to common struct clk Mike Turquette
2011-12-14  4:11 ` [PATCH 1/7] OMAP: Kconfig: select GENERIC_CLK Mike Turquette
2011-12-14  4:11 ` [PATCH 2/7] HACK: omap4: clk: convert to common struct clk Mike Turquette
     [not found] ` <1323835918-2371-1-git-send-email-mturquette-l0cyMroinI0@public.gmane.org>
2011-12-14  4:11   ` [PATCH 3/7] HACK: omap: convert 44xx data " Mike Turquette
2011-12-14  4:27     ` Paul Walmsley
2011-12-14  4:44       ` Turquette, Mike
2011-12-14  5:29         ` Paul Walmsley
2011-12-14  4:11 ` [PATCH 4/7] omap: hwmod: convert to use " Mike Turquette
2011-12-14  4:11 ` [PATCH 5/7] omap: panda: use clk_prepare in ehci init Mike Turquette
2011-12-14  4:11 ` [PATCH 6/7] omap: dss: use clk_prepare in dss reset Mike Turquette
2011-12-14  4:11 ` [PATCH 7/7] HACK: comment WARN_ON in _clkdm_clk_hwmod_disable Mike Turquette

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).