From: <mythripk@ti.com>
To: tomi.valkeinen@ti.com, linux-omap@vger.kernel.org
Cc: Mythri P K <mythripk@ti.com>
Subject: [PATCH v2 1/4] OMAPDSS: HDMI: remove duplicate video interface code
Date: Mon, 2 Jan 2012 14:14:53 +0530 [thread overview]
Message-ID: <1325493896-26355-2-git-send-email-mythripk@ti.com> (raw)
In-Reply-To: <1325493896-26355-1-git-send-email-mythripk@ti.com>
From: Mythri P K <mythripk@ti.com>
video interface structure is a duplicate structure with parameters which are
already present in ip_data config structure, Thus removing the structure and
modifying corresponding code.
Signed-off-by: Mythri P K <mythripk@ti.com>
---
drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 31 +++++++---------------------
drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h | 7 ------
2 files changed, 8 insertions(+), 30 deletions(-)
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index e1a6ce5..403d6fc 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -629,8 +629,7 @@ static void hdmi_core_av_packet_config(struct hdmi_ip_data *ip_data,
}
static void hdmi_wp_init(struct omap_video_timings *timings,
- struct hdmi_video_format *video_fmt,
- struct hdmi_video_interface *video_int)
+ struct hdmi_video_format *video_fmt)
{
pr_debug("Enter hdmi_wp_init\n");
@@ -645,12 +644,6 @@ static void hdmi_wp_init(struct omap_video_timings *timings,
video_fmt->y_res = 0;
video_fmt->x_res = 0;
- video_int->vsp = 0;
- video_int->hsp = 0;
-
- video_int->interlacing = 0;
- video_int->tm = 0; /* HDMI_TIMING_SLAVE */
-
}
void ti_hdmi_4xxx_wp_video_start(struct hdmi_ip_data *ip_data, bool start)
@@ -687,17 +680,16 @@ static void hdmi_wp_video_config_format(struct hdmi_ip_data *ip_data,
hdmi_write_reg(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_SIZE, l);
}
-static void hdmi_wp_video_config_interface(struct hdmi_ip_data *ip_data,
- struct hdmi_video_interface *video_int)
+static void hdmi_wp_video_config_interface(struct hdmi_ip_data *ip_data)
{
u32 r;
pr_debug("Enter hdmi_wp_video_config_interface\n");
r = hdmi_read_reg(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_CFG);
- r = FLD_MOD(r, video_int->vsp, 7, 7);
- r = FLD_MOD(r, video_int->hsp, 6, 6);
- r = FLD_MOD(r, video_int->interlacing, 3, 3);
- r = FLD_MOD(r, video_int->tm, 1, 0);
+ r = FLD_MOD(r, ip_data->cfg.timings.vsync_pol, 7, 7);
+ r = FLD_MOD(r, ip_data->cfg.timings.hsync_pol, 6, 6);
+ r = FLD_MOD(r, ip_data->cfg.interlace, 3, 3);
+ r = FLD_MOD(r, 1, 1, 0); /* HDMI_TIMING_MASTER_24BIT */
hdmi_write_reg(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_CFG, r);
}
@@ -725,15 +717,13 @@ void ti_hdmi_4xxx_basic_configure(struct hdmi_ip_data *ip_data)
/* HDMI */
struct omap_video_timings video_timing;
struct hdmi_video_format video_format;
- struct hdmi_video_interface video_interface;
/* HDMI core */
struct hdmi_core_infoframe_avi avi_cfg;
struct hdmi_core_video_config v_core_cfg;
struct hdmi_core_packet_enable_repeat repeat_cfg;
struct hdmi_config *cfg = &ip_data->cfg;
- hdmi_wp_init(&video_timing, &video_format,
- &video_interface);
+ hdmi_wp_init(&video_timing, &video_format);
hdmi_core_init(&v_core_cfg,
&avi_cfg,
@@ -748,12 +738,7 @@ void ti_hdmi_4xxx_basic_configure(struct hdmi_ip_data *ip_data)
hdmi_wp_video_config_format(ip_data, &video_format);
- video_interface.vsp = cfg->timings.vsync_pol;
- video_interface.hsp = cfg->timings.hsync_pol;
- video_interface.interlacing = cfg->interlace;
- video_interface.tm = 1 ; /* HDMI_TIMING_MASTER_24BIT */
-
- hdmi_wp_video_config_interface(ip_data, &video_interface);
+ hdmi_wp_video_config_interface(ip_data);
/*
* configure core video part
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
index 2040956..914bec6 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
@@ -517,13 +517,6 @@ struct hdmi_video_format {
u32 x_res; /* pixel per line */
};
-struct hdmi_video_interface {
- int vsp; /* Vsync polarity */
- int hsp; /* Hsync polarity */
- int interlacing;
- int tm; /* Timing mode */
-};
-
struct hdmi_audio_format {
enum hdmi_stereo_channels stereo_channels;
u8 active_chnnls_msk;
--
1.7.5.4
next prev parent reply other threads:[~2012-01-02 8:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-02 8:44 [PATCH 0/4] OMAPDSS: HDMI: Improve the timings logic in HDMI mythripk
2012-01-02 8:44 ` mythripk [this message]
2012-01-02 8:44 ` [PATCH v2 2/4] OMAPDSS: HDMI: update static timing table mythripk
2012-01-02 8:44 ` [PATCH v2 3/4] OMAPDSS: HDMI: change the timing match logic mythripk
2012-01-02 8:44 ` [PATCH v2 4/4] OMAPDSS: HDMI: remove duplicate code and mode parameter mythripk
2012-01-03 10:04 ` [PATCH v2 3/4] OMAPDSS: HDMI: change the timing match logic Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1325493896-26355-2-git-send-email-mythripk@ti.com \
--to=mythripk@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).