From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Liam Girdwood <lrg@ti.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Tony Lindgren <tony@atomide.com>
Cc: Misael Lopez Cruz <misael.lopez@ti.com>,
alsa-devel@alsa-project.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 - resend 00/13] OMAP4: ASoC: Support for PandaBoard family
Date: Tue, 24 Jan 2012 13:52:17 +0200 [thread overview]
Message-ID: <1327405950-6676-1-git-send-email-peter.ujfalusi@ti.com> (raw)
Hello,
the following series will add ASoC support for PandaBoards.
PandaBoards have different audio routings compared to SDP4430/Blaze boards, but
the differences not that big to justify a new ASoC machine driver.
The v3 series did not made it to 3.3 kernel.
This set contains all the patches needed to enable the audio support on the
PandaBoard family.
The machine driver has been converted to a generic OMAP4 driver which can
support wide range of machines using OMAP4 with twl6040 codec.
I have remove the hardcoded MCLK clock frequency use in the machine driver
(there can be devices with different MCLK configuration). This changed
patch 04, 05, and 12. Since this does not affect the functionality I kept the
acks for these patches. Patch 11 did not existed in the v3 series.
Regards,
Peter
---
Peter Ujfalusi (13):
ASoC: sdp4430: Correct author e-mail address
ASoC: OMAP4: Rename the sdp4430 machine driver
ASoC: omap-abe-twl6040: Correct internal prefix, Kconfig entry
include: platform_data: Platform data header for OMAP4 ASoC audio
OMAP4: 4430sdp: Register platform device for OMAP4 audio
ASoC: omap-abe-twl6040: Convert to platform deriver
ASoC: twl6040: Convert MICBIAS to SUPPLY widget
ASoC: omap-abe-twl6040: Add complete DAPM routing
ASoC: omap-abe-twl6040: DAI link selection based on platform data
ASoC: omap-abe-twl6040: Configure card according to platform data
ASoC: omap-abe-twl6040: Use provided MCLK frequency from pdata
OMAP4: omap4panda: Enable audio support
ASoC: Kconfig: OMAP4: Enable support for PandaBoards
arch/arm/mach-omap2/board-4430sdp.c | 29 ++
arch/arm/mach-omap2/board-omap4panda.c | 60 ++++-
include/linux/platform_data/omap-abe-twl6040.h | 49 ++++
sound/soc/codecs/twl6040.c | 16 +-
sound/soc/omap/Kconfig | 13 +-
sound/soc/omap/Makefile | 4 +-
sound/soc/omap/omap-abe-twl6040.c | 349 ++++++++++++++++++++++++
sound/soc/omap/sdp4430.c | 279 -------------------
8 files changed, 504 insertions(+), 295 deletions(-)
create mode 100644 include/linux/platform_data/omap-abe-twl6040.h
create mode 100644 sound/soc/omap/omap-abe-twl6040.c
delete mode 100644 sound/soc/omap/sdp4430.c
--
1.7.8.3
next reply other threads:[~2012-01-24 11:52 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-24 11:52 Peter Ujfalusi [this message]
2012-01-24 11:52 ` [PATCH v4 - resend 01/13] ASoC: sdp4430: Correct author e-mail address Peter Ujfalusi
2012-01-24 11:52 ` [PATCH v4 - resend 02/13] ASoC: OMAP4: Rename the sdp4430 machine driver Peter Ujfalusi
2012-01-24 11:52 ` [PATCH v4 - resend 03/13] ASoC: omap-abe-twl6040: Correct internal prefix, Kconfig entry Peter Ujfalusi
2012-01-24 11:52 ` [PATCH v4 - resend 04/13] include: platform_data: Platform data header for OMAP4 ASoC audio Peter Ujfalusi
2012-01-24 11:52 ` [PATCH v4 - resend 05/13] OMAP4: 4430sdp: Register platform device for OMAP4 audio Peter Ujfalusi
2012-01-24 11:52 ` [PATCH v4 - resend 06/13] ASoC: omap-abe-twl6040: Convert to platform deriver Peter Ujfalusi
2012-01-24 11:52 ` [PATCH v4 - resend 07/13] ASoC: twl6040: Convert MICBIAS to SUPPLY widget Peter Ujfalusi
2012-01-24 11:52 ` [PATCH v4 - resend 08/13] ASoC: omap-abe-twl6040: Add complete DAPM routing Peter Ujfalusi
2012-01-24 11:52 ` [PATCH v4 - resend 09/13] ASoC: omap-abe-twl6040: DAI link selection based on platform data Peter Ujfalusi
2012-01-24 11:52 ` [PATCH v4 - resend 10/13] ASoC: omap-abe-twl6040: Configure card according to " Peter Ujfalusi
2012-01-24 13:00 ` Mark Brown
2012-01-25 8:23 ` Peter Ujfalusi
2012-01-25 11:33 ` Mark Brown
2012-01-25 12:48 ` Peter Ujfalusi
2012-01-24 11:52 ` [PATCH v4 - resend 11/13] ASoC: omap-abe-twl6040: Use provided MCLK frequency from pdata Peter Ujfalusi
2012-01-27 17:58 ` [alsa-devel] " Mark Brown
2012-01-24 11:52 ` [PATCH v4 - resend 12/13] OMAP4: omap4panda: Enable audio support Peter Ujfalusi
2012-01-24 11:52 ` [PATCH v4 - resend 13/13] ASoC: Kconfig: OMAP4: Enable support for PandaBoards Peter Ujfalusi
2012-01-24 12:21 ` [PATCH v4 - resend 00/13] OMAP4: ASoC: Support for PandaBoard family Mark Brown
2012-01-25 10:50 ` [alsa-devel] " Jassi Brar
2012-01-25 11:11 ` Peter Ujfalusi
2012-01-27 22:51 ` Guiriec, Sebastien
2012-01-28 6:49 ` Jassi Brar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1327405950-6676-1-git-send-email-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=lrg@ti.com \
--cc=misael.lopez@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox