linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Balaji T K <balajitk@ti.com>
To: linux-mmc@vger.kernel.org, cjb@laptop.org
Cc: linux-omap@vger.kernel.org, Balaji T K <balajitk@ti.com>
Subject: [PATCH 1/4] mmc: omap: Enable Auto CMD12
Date: Fri, 24 Feb 2012 21:14:31 +0530	[thread overview]
Message-ID: <1330098274-12048-2-git-send-email-balajitk@ti.com> (raw)
In-Reply-To: <1330098274-12048-1-git-send-email-balajitk@ti.com>

Enable Auto-CMD12 for multi block read/write on HSMMC
Tested on OMAP4430, OMAP3430 and OMAP2430 SDP

Signed-off-by: Balaji T K <balajitk@ti.com>
---
 drivers/mmc/host/omap_hsmmc.c |   17 ++++++++++++++---
 1 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 36e7f5b..f4c7f89 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -82,6 +82,7 @@
 #define BRR_ENABLE		(1 << 5)
 #define DTO_ENABLE		(1 << 20)
 #define INIT_STREAM		(1 << 1)
+#define ACEN_ACMD12		(1 << 2)
 #define DP_SELECT		(1 << 21)
 #define DDIR			(1 << 4)
 #define DMA_EN			0x1
@@ -123,6 +124,7 @@
 #define OMAP_MMC_MAX_CLOCK	52000000
 #define DRIVER_NAME		"omap_hsmmc"
 
+#define AUTO_CMD12		(1 << 0)	/* Auto CMD12 support */
 /*
  * One controller can have multiple slots, like on some omap boards using
  * omap.c controller driver. Luckily this is not currently done on any known
@@ -185,6 +187,7 @@ struct omap_hsmmc_host {
 	int			reqs_blocked;
 	int			use_reg;
 	int			req_in_progress;
+	unsigned int		flags;
 	struct omap_hsmmc_next	next_data;
 
 	struct	omap_mmc_platform_data	*pdata;
@@ -886,6 +889,8 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd,
 		cmdtype = 0x3;
 
 	cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
+	if ((host->flags & AUTO_CMD12) && mmc_op_multi(cmd->opcode))
+		cmdreg |= ACEN_ACMD12;
 
 	if (data) {
 		cmdreg |= DP_SELECT | MSBS | BCE;
@@ -957,11 +962,16 @@ omap_hsmmc_xfer_done(struct omap_hsmmc_host *host, struct mmc_data *data)
 	else
 		data->bytes_xfered = 0;
 
-	if (!data->stop) {
+	if (data->stop && ((!(host->flags & AUTO_CMD12)) || data->error))
+		omap_hsmmc_start_command(host, data->stop, NULL);
+	else {
+		if (data->stop)
+			data->stop->resp[0] = OMAP_HSMMC_READ(host->base,
+							RSP76);
 		omap_hsmmc_request_done(host, data->mrq);
-		return;
 	}
-	omap_hsmmc_start_command(host, data->stop, NULL);
+
+	return;
 }
 
 /*
@@ -1899,6 +1909,7 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
 	host->mapbase	= res->start;
 	host->base	= ioremap(host->mapbase, SZ_4K);
 	host->power_mode = MMC_POWER_OFF;
+	host->flags	= AUTO_CMD12;
 	host->next_data.cookie = 1;
 
 	platform_set_drvdata(pdev, host);
-- 
1.7.0.4


  reply	other threads:[~2012-02-24 15:44 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-24 15:44 [PATCH 0/4] mmc: omap: add autocmd12, DDR support and runtime fixes Balaji T K
2012-02-24 15:44 ` Balaji T K [this message]
2012-02-24 15:44 ` [PATCH 2/4] mmc: omap: add DDR support to omap_hsmmc Balaji T K
2012-02-24 15:44 ` [PATCH 3/4] mmc: omap: use runtime put sync in probe error patch Balaji T K
2012-02-24 15:44 ` [PATCH 4/4] mmc: omap: context save after enabling runtime pm Balaji T K

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1330098274-12048-2-git-send-email-balajitk@ti.com \
    --to=balajitk@ti.com \
    --cc=cjb@laptop.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).