linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ohad Ben-Cohen <ohad@wizery.com>
To: linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: Ohad Ben-Cohen <ohad@wizery.com>,
	Brian Swetland <swetland@google.com>,
	Iliyan Malchev <malchev@google.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Grant Likely <grant.likely@secretlab.ca>,
	Rusty Russell <rusty@rustcorp.com.au>,
	Mark Grosen <mgrosen@ti.com>,
	John Williams <john.williams@petalogix.com>,
	Michal Simek <monstr@monstr.eu>,
	Loic PALLARDY <loic.pallardy@stericsson.com>,
	Ludovic BARRE <ludovic.barre@stericsson.com>,
	Omar Ramirez Luna <omar.luna@linaro.org>,
	Guzman Lugo Fernando <fernando.lugo@ti.com>,
	Anna Suman <s-anna@ti.com>, Clark Rob <rob@ti.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Saravana Kannan <skannan@codeaurora.org>,
	David Brown <davidb@codeaurora.org>,
	Kieran Bingham <kieranbingham@gmail.com>,
	Tony Lindgren <tony@atomide.com>
Subject: [PATCH 7/7] remoteproc: cleanup resource table parsing paths
Date: Thu,  1 Mar 2012 10:11:37 +0200	[thread overview]
Message-ID: <1330589497-4139-8-git-send-email-ohad@wizery.com> (raw)
In-Reply-To: <1330589497-4139-1-git-send-email-ohad@wizery.com>

rproc_handle_resources() looks for the resource table and then
invokes a resource handler function which it took as a parameter.

This works, but it's a bit unintuitive to follow.

Instead of passing around function pointers, this patch changes
rproc_handle_resource() to just find and return the resource table,
and then the calling sites of rproc_handle_resource() invoke their
resource handlers directly.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Brian Swetland <swetland@google.com>
Cc: Iliyan Malchev <malchev@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Mark Grosen <mgrosen@ti.com>
Cc: John Williams <john.williams@petalogix.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Loic PALLARDY <loic.pallardy@stericsson.com>
Cc: Ludovic BARRE <ludovic.barre@stericsson.com>
Cc: Omar Ramirez Luna <omar.luna@linaro.org>
Cc: Guzman Lugo Fernando <fernando.lugo@ti.com>
Cc: Anna Suman <s-anna@ti.com>
Cc: Clark Rob <rob@ti.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Saravana Kannan <skannan@codeaurora.org>
Cc: David Brown <davidb@codeaurora.org>
Cc: Kieran Bingham <kieranbingham@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
---
 drivers/remoteproc/remoteproc_core.c |   70 ++++++++++++++++++---------------
 1 files changed, 38 insertions(+), 32 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 9be5dad..ee15c68 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -822,32 +822,31 @@ rproc_handle_virtio_rsc(struct rproc *rproc, struct resource_table *table, int l
 }
 
 /**
- * rproc_handle_resources() - find and handle the resource table
+ * rproc_find_rsc_table() - find the resource table
  * @rproc: the rproc handle
  * @elf_data: the content of the ELF firmware image
  * @len: firmware size (in bytes)
- * @handler: function that should be used to handle the resource table
+ * @tablesz: place holder for providing back the table size
  *
  * This function finds the resource table inside the remote processor's
- * firmware, and invoke a user-supplied handler with it (we have two
- * possible handlers: one is invoked upon registration of @rproc,
- * in order to register the supported virito devices, and the other is
- * invoked when @rproc is actually booted).
- *
- * Currently this function fails if a resource table doesn't exist.
- * This restriction will be removed when we'll start supporting remote
- * processors that don't need a resource table.
+ * firmware. It is used both upon the registration of @rproc (in order
+ * to look for and register the supported virito devices), and when the
+ * @rproc is booted.
+ *
+ * Returns the pointer to the resource table if it is found, and write its
+ * size into @tablesz. If a valid table isn't found, NULL is returned
+ * (and @tablesz isn't set).
  */
-static int rproc_handle_resources(struct rproc *rproc, const u8 *elf_data,
-				size_t len, rproc_handle_resources_t handler)
-
+static struct resource_table *
+rproc_find_rsc_table(struct rproc *rproc, const u8 *elf_data, size_t len,
+							int *tablesz)
 {
 	struct elf32_hdr *ehdr;
 	struct elf32_shdr *shdr;
 	const char *name_table;
 	struct device *dev = rproc->dev;
-	int i, ret = -EINVAL;
-	struct resource_table *table;
+	struct resource_table *table = NULL;
+	int i;
 
 	ehdr = (struct elf32_hdr *)elf_data;
 	shdr = (struct elf32_shdr *)(elf_data + ehdr->e_shoff);
@@ -866,39 +865,39 @@ static int rproc_handle_resources(struct rproc *rproc, const u8 *elf_data,
 		/* make sure we have the entire table */
 		if (offset + size > len) {
 			dev_err(dev, "resource table truncated\n");
-			return -EINVAL;
+			return NULL;
 		}
 
 		/* make sure table has at least the header */
 		if (sizeof(struct resource_table) > size) {
 			dev_err(dev, "header-less resource table\n");
-			return -EINVAL;
+			return NULL;
 		}
 
 		/* we don't support any version beyond the first */
 		if (table->ver != 1) {
 			dev_err(dev, "unsupported fw ver: %d\n", table->ver);
-			return -EINVAL;
+			return NULL;
 		}
 
 		/* make sure reserved bytes are zeroes */
 		if (table->reserved[0] || table->reserved[1]) {
 			dev_err(dev, "non zero reserved bytes\n");
-			return -EINVAL;
+			return NULL;
 		}
 
 		/* make sure the offsets array isn't truncated */
 		if (table->num * sizeof(table->offset[0]) +
 				sizeof(struct resource_table) > size) {
 			dev_err(dev, "resource table incomplete\n");
-			return -EINVAL;
+			return NULL;
 		}
 
-		ret = handler(rproc, table, shdr->sh_size);
+		*tablesz = shdr->sh_size;
 		break;
 	}
 
-	return ret;
+	return table;
 }
 
 /**
@@ -1012,7 +1011,8 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 	struct device *dev = rproc->dev;
 	const char *name = rproc->firmware;
 	struct elf32_hdr *ehdr;
-	int ret;
+	struct resource_table *table;
+	int ret, tablesz;
 
 	ret = rproc_fw_sanity_check(rproc, fw);
 	if (ret)
@@ -1039,9 +1039,13 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 	 */
 	rproc->bootaddr = ehdr->e_entry;
 
+	/* look for the resource table */
+	table = rproc_find_rsc_table(rproc, fw->data, fw->size, &tablesz);
+	if (!table)
+		goto clean_up;
+
 	/* handle fw resources which are required to boot rproc */
-	ret = rproc_handle_resources(rproc, fw->data, fw->size,
-						rproc_handle_boot_rsc);
+	ret = rproc_handle_boot_rsc(rproc, table, tablesz);
 	if (ret) {
 		dev_err(dev, "Failed to process resources: %d\n", ret);
 		goto clean_up;
@@ -1084,19 +1088,21 @@ clean_up:
 static void rproc_fw_config_virtio(const struct firmware *fw, void *context)
 {
 	struct rproc *rproc = context;
-	struct device *dev = rproc->dev;
-	int ret;
+	struct resource_table *table;
+	int ret, tablesz;
 
 	if (rproc_fw_sanity_check(rproc, fw) < 0)
 		goto out;
 
-	/* does the fw support any virtio devices ? */
-	ret = rproc_handle_resources(rproc, fw->data, fw->size,
-						rproc_handle_virtio_rsc);
-	if (ret) {
-		dev_info(dev, "No fw virtio device was found\n");
+	/* look for the resource table */
+	table = rproc_find_rsc_table(rproc, fw->data, fw->size, &tablesz);
+	if (!table)
+		goto out;
+
+	/* look for virtio devices and register them */
+	ret = rproc_handle_virtio_rsc(rproc, table, tablesz);
+	if (ret)
 		goto out;
-	}
 
 out:
 	if (fw)
-- 
1.7.5.4


      parent reply	other threads:[~2012-03-01  8:12 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-01  8:11 [PATCH 0/7] remoteproc: additional virtio support Ohad Ben-Cohen
2012-03-01  8:11 ` [PATCH 1/7] remoteproc: resource table overhaul Ohad Ben-Cohen
2012-03-16 14:57   ` Michal Simek
2012-03-17  6:39     ` Ohad Ben-Cohen
2012-03-19  7:07       ` Michal Simek
2012-05-17 18:45       ` Ohad Ben-Cohen
2012-05-21 13:02         ` Michal Simek
2012-05-21 14:00           ` Ohad Ben-Cohen
2012-05-22  5:51             ` Michal Simek
2012-05-22  8:02               ` Ohad Ben-Cohen
2012-05-22  8:18                 ` Michal Simek
2012-05-22  9:14               ` frq09524
2012-05-22  9:22                 ` Ohad Ben-Cohen
2012-05-22 12:51                   ` frq09524
2012-05-23 12:41                     ` Ohad Ben-Cohen
2012-03-01  8:11 ` [PATCH 2/7] remoteproc: remoteproc_rpmsg -> remoteproc_virtio Ohad Ben-Cohen
2012-03-01  8:11 ` [PATCH 3/7] remoteproc: safer boot/shutdown order Ohad Ben-Cohen
2012-03-01  8:11 ` [PATCH 4/7] remoteproc: remove the single rpmsg vdev limitation Ohad Ben-Cohen
2012-03-01  8:11 ` [PATCH 5/7] remoteproc/omap: remove the mbox_callback limitation Ohad Ben-Cohen
2012-03-01  8:11 ` [PATCH 6/7] remoteproc: remove the hardcoded vring alignment Ohad Ben-Cohen
2012-03-01  8:11 ` Ohad Ben-Cohen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1330589497-4139-8-git-send-email-ohad@wizery.com \
    --to=ohad@wizery.com \
    --cc=arnd@arndb.de \
    --cc=davidb@codeaurora.org \
    --cc=fernando.lugo@ti.com \
    --cc=grant.likely@secretlab.ca \
    --cc=john.williams@petalogix.com \
    --cc=kieranbingham@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=loic.pallardy@stericsson.com \
    --cc=ludovic.barre@stericsson.com \
    --cc=malchev@google.com \
    --cc=mgrosen@ti.com \
    --cc=monstr@monstr.eu \
    --cc=omar.luna@linaro.org \
    --cc=rob@ti.com \
    --cc=rusty@rustcorp.com.au \
    --cc=s-anna@ti.com \
    --cc=sboyd@codeaurora.org \
    --cc=skannan@codeaurora.org \
    --cc=swetland@google.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).