From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: Ricardo Neri <ricardo.neri@ti.com>
Cc: mythripk@ti.com, s-chereau@ti.com, x0055901@ti.com,
vaibhav.bedia@ti.com, s-guiriec@ti.com, lrg@ti.com,
peter.ujfalusi@ti.com, agraf@suse.de, research@ottomaneng.com,
linux-omap@vger.kernel.org
Subject: Re: [PATCH 05/10] OMAPDSS: HDMI: Decouple HDMI audio from ASoC
Date: Mon, 23 Apr 2012 16:25:09 +0300 [thread overview]
Message-ID: <1335187509.1535.37.camel@lappy> (raw)
In-Reply-To: <1332974305-4578-6-git-send-email-ricardo.neri@ti.com>
[-- Attachment #1: Type: text/plain, Size: 4410 bytes --]
On Wed, 2012-03-28 at 16:38 -0600, Ricardo Neri wrote:
> Instead of having OMAPDSS HDMI audio functionality depending on the
> ASoC HDMI audio driver, use a new config option so that
> potential users, including ASoC, may select if needed.
>
> Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
> ---
> drivers/video/omap2/dss/Kconfig | 4 ++++
> drivers/video/omap2/dss/dss_features.c | 3 +--
> drivers/video/omap2/dss/ti_hdmi.h | 6 ++----
> drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 3 +--
> drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h | 5 +----
> 5 files changed, 9 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig
> index 7be7c06..b492001 100644
> --- a/drivers/video/omap2/dss/Kconfig
> +++ b/drivers/video/omap2/dss/Kconfig
> @@ -68,6 +68,10 @@ config OMAP4_DSS_HDMI
> HDMI Interface. This adds the High Definition Multimedia Interface.
> See http://www.hdmi.org/ for HDMI specification.
>
> +config OMAP4_DSS_HDMI_AUDIO
> + bool
> + depends on OMAP4_DSS_HDMI
> +
> config OMAP2_DSS_SDI
> bool "SDI support"
> depends on ARCH_OMAP3
> diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
> index c1839e2..399a28a 100644
> --- a/drivers/video/omap2/dss/dss_features.c
> +++ b/drivers/video/omap2/dss/dss_features.c
> @@ -497,8 +497,7 @@ static const struct ti_hdmi_ip_ops omap4_hdmi_functions = {
> .dump_core = ti_hdmi_4xxx_core_dump,
> .dump_pll = ti_hdmi_4xxx_pll_dump,
> .dump_phy = ti_hdmi_4xxx_phy_dump,
> -#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
> - defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
> +#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
> .audio_enable = ti_hdmi_4xxx_wp_audio_enable,
> .audio_start = ti_hdmi_4xxx_audio_start,
> #endif
> diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h
> index 529e227..211da6f 100644
> --- a/drivers/video/omap2/dss/ti_hdmi.h
> +++ b/drivers/video/omap2/dss/ti_hdmi.h
> @@ -110,8 +110,7 @@ struct ti_hdmi_ip_ops {
>
> void (*dump_phy)(struct hdmi_ip_data *ip_data, struct seq_file *s);
>
> -#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
> - defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
> +#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
> void (*audio_enable)(struct hdmi_ip_data *ip_data, bool start);
>
> void (*audio_start)(struct hdmi_ip_data *ip_data, bool start);
> @@ -145,8 +144,7 @@ void ti_hdmi_4xxx_wp_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
> void ti_hdmi_4xxx_pll_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
> void ti_hdmi_4xxx_core_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
> void ti_hdmi_4xxx_phy_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
> -#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
> - defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
> +#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
> void ti_hdmi_4xxx_wp_audio_enable(struct hdmi_ip_data *ip_data, bool enable);
> void ti_hdmi_4xxx_audio_start(struct hdmi_ip_data *ip_data, bool enable);
> #endif
> diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
> index e6fa61d..e06139a 100644
> --- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
> +++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
> @@ -1030,8 +1030,7 @@ void ti_hdmi_4xxx_phy_dump(struct hdmi_ip_data *ip_data, struct seq_file *s)
> DUMPPHY(HDMI_TXPHY_PAD_CFG_CTRL);
> }
>
> -#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
> - defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
> +#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
> void hdmi_wp_audio_config_format(struct hdmi_ip_data *ip_data,
> struct hdmi_audio_format *aud_fmt)
> {
> diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
> index 9fa5cb1..222cc16 100644
> --- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
> +++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
> @@ -26,8 +26,6 @@
> #include "ti_hdmi.h"
> #if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
> defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
> -#include <sound/soc.h>
> -#include <sound/pcm_params.h>
Unrelated change. And... is there something wrong with this? Shouldn't
the defines above be changed?
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
next prev parent reply other threads:[~2012-04-23 13:25 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-28 22:38 [PATCH 00/10] OMAPDSS: HDMI: Prepare for OMAP5 and DSS dev driver audio support Ricardo Neri
2012-03-28 22:38 ` [PATCH 01/10] OMAPDSS: HDMI: Remove ASoC codec Ricardo Neri
2012-04-23 13:17 ` Tomi Valkeinen
2012-04-25 2:27 ` Ricardo Neri
2012-03-28 22:38 ` [PATCH 02/10] OMAPDSS: HDMI: OMAP4: Remove CEA-861 audio infoframe and IEC-60958 enums Ricardo Neri
2012-04-23 13:12 ` Tomi Valkeinen
2012-04-25 3:37 ` Ricardo Neri
2012-04-27 1:32 ` Ricardo Neri
2012-04-27 6:31 ` Tomi Valkeinen
2012-03-28 22:38 ` [PATCH 03/10] OMAPDSS: HDMI: OMAP4: Correcty typo in I2S definitions Ricardo Neri
2012-04-23 12:42 ` Tomi Valkeinen
2012-04-25 3:39 ` Ricardo Neri
2012-03-28 22:38 ` [PATCH 04/10] OMAPDSS: HDMI: OMAP4: Decouple wrapper enable and audio start Ricardo Neri
2012-03-28 22:38 ` [PATCH 05/10] OMAPDSS: HDMI: Decouple HDMI audio from ASoC Ricardo Neri
2012-04-23 13:25 ` Tomi Valkeinen [this message]
2012-04-25 3:44 ` Ricardo Neri
2012-03-28 22:38 ` [PATCH 06/10] OMAPDSS: HDMI: OMAP4: Expand configuration for IEC-60958 audio Ricardo Neri
2012-03-28 22:38 ` [PATCH 07/10] OMAPDSS: HDMI: Relocate N/CTS calculation Ricardo Neri
2012-03-28 22:38 ` [PATCH 08/10] OMAPDSS: HDMI: Add support for more audio sample rates in " Ricardo Neri
2012-03-28 22:38 ` [PATCH 09/10] OMAPDSS: HDMI: OMAP4: Add an audio configuration function Ricardo Neri
2012-03-28 22:38 ` [PATCH 10/10] OMAPDSS: HDMI: Implement DSS driver interface for audio Ricardo Neri
2012-04-23 13:01 ` Tomi Valkeinen
2012-04-25 4:48 ` Ricardo Neri
2012-04-25 6:19 ` Tomi Valkeinen
2012-04-25 23:01 ` Ricardo Neri
2012-04-26 7:31 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1335187509.1535.37.camel@lappy \
--to=tomi.valkeinen@ti.com \
--cc=agraf@suse.de \
--cc=linux-omap@vger.kernel.org \
--cc=lrg@ti.com \
--cc=mythripk@ti.com \
--cc=peter.ujfalusi@ti.com \
--cc=research@ottomaneng.com \
--cc=ricardo.neri@ti.com \
--cc=s-chereau@ti.com \
--cc=s-guiriec@ti.com \
--cc=vaibhav.bedia@ti.com \
--cc=x0055901@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).